From 77d340c852d7bb38e70633a9129bbe2a77012eef Mon Sep 17 00:00:00 2001 From: VectorKappa Date: Sun, 15 Jun 2025 10:11:18 +0200 Subject: [PATCH] OrcaSlicer config --- .config/OrcaSlicer/.gitignore | 3 + .config/OrcaSlicer/OrcaSlicer.conf | 317 +++ .config/OrcaSlicer/printers/BL-P001.json | 88 + .config/OrcaSlicer/printers/BL-P002.json | 88 + .config/OrcaSlicer/printers/C11.json | 88 + .config/OrcaSlicer/printers/C12.json | 80 + .config/OrcaSlicer/printers/C13.json | 61 + .config/OrcaSlicer/printers/N1.json | 62 + .config/OrcaSlicer/printers/N2S.json | 61 + .config/OrcaSlicer/printers/ams_load.gcode | 51 + .config/OrcaSlicer/printers/ams_unload.gcode | 33 + .../printers/filaments_blacklist.json | 60 + .config/OrcaSlicer/printers/version.txt | 1 + .config/OrcaSlicer/system/Creality.json | 1786 +++++++++++++++++ .../Creality Generic ABS @Ender-3V3-all.json | 21 + .../Creality Generic ABS @Ender-5Max-all.json | 99 + .../Creality Generic ABS @Hi-all.json | 15 + .../Creality Generic ABS @K1-all.json | 23 + .../Creality Generic ABS @K2-all.json | 27 + .../filament/Creality Generic ABS.json | 64 + .../Creality Generic ASA @Ender-3V3-all.json | 21 + .../Creality Generic ASA @Ender-5Max-all.json | 99 + .../Creality Generic ASA @Hi-all.json | 15 + .../Creality Generic ASA @K1-all.json | 23 + .../Creality Generic ASA @K2-all.json | 27 + .../Creality Generic ASA-CF @Hi-all.json | 14 + .../filament/Creality Generic ASA.json | 54 + .../Creality Generic PA @Ender-5Max-all.json | 99 + ...Creality Generic PA-CF @Ender-3V3-all.json | 14 + .../Creality Generic PA-CF @K1-all.json | 20 + .../Creality Generic PA-CF @K2-all.json | 24 + .../filament/Creality Generic PA-CF.json | 82 + .../filament/Creality Generic PC @K1-all.json | 23 + .../filament/Creality Generic PC.json | 14 + .../Creality Generic PETG @Ender-3V3-all.json | 31 + ...Creality Generic PETG @Ender-5Max-all.json | 99 + .../Creality Generic PETG @Hi-all.json | 25 + .../Creality Generic PETG @K1-all.json | 56 + .../Creality Generic PETG @K2-all.json | 60 + .../Creality Generic PETG-CF @Hi-all.json | 14 + .../filament/Creality Generic PETG.json | 74 + .../Creality Generic PLA @Ender-3V3-all.json | 29 + .../Creality Generic PLA @Ender-5Max-all.json | 99 + .../Creality Generic PLA @Hi-all.json | 94 + .../Creality Generic PLA @K1-all.json | 47 + .../Creality Generic PLA @K2-all.json | 54 + ...Generic PLA High Speed @Ender-3V3-all.json | 22 + ...eality Generic PLA High Speed @Hi-all.json | 18 + ...eality Generic PLA High Speed @K1-all.json | 23 + ...eality Generic PLA High Speed @K2-all.json | 17 + ...lity Generic PLA Matte @Ender-3V3-all.json | 20 + .../Creality Generic PLA Matte @Hi-all.json | 15 + .../Creality Generic PLA Matte @K1-all.json | 23 + .../Creality Generic PLA Matte @K2-all.json | 17 + ...ality Generic PLA Silk @Ender-3V3-all.json | 20 + .../Creality Generic PLA Silk @Hi-all.json | 18 + .../Creality Generic PLA Silk @K1-all.json | 23 + .../Creality Generic PLA Silk @K2-all.json | 17 + .../Creality Generic PLA Wood @Hi-all.json | 18 + .../Creality Generic PLA-CF @Hi-all.json | 15 + .../Creality Generic PLA-CF @K1-all.json | 23 + .../Creality Generic PLA-CF @K2-all.json | 23 + .../filament/Creality Generic PLA-CF.json | 60 + .../filament/Creality Generic PLA.json | 65 + .../Creality Generic TPU @Ender-3V3-all.json | 27 + .../Creality Generic TPU @Ender-5Max-all.json | 99 + .../Creality Generic TPU @Hi-all.json | 37 + .../Creality Generic TPU @K1-all.json | 41 + .../Creality Generic TPU @K2-all.json | 42 + .../filament/Creality Generic TPU.json | 27 + .../filament/Creality HF Generic PLA.json | 33 + .../Creality HF Generic Speed PLA.json | 27 + .../Creality Hyper ABS @Ender-5Max-all.json | 99 + .../Creality Hyper PLA @Ender-5Max-all.json | 100 + ...Creality Hyper PLA-CF @Ender-5Max-all.json | 99 + .../Creality Silk PLA @Ender-5Max-all.json | 99 + .../Creality/filament/fdm_filament_abs.json | 88 + .../Creality/filament/fdm_filament_asa.json | 85 + .../filament/fdm_filament_common.json | 144 ++ .../Creality/filament/fdm_filament_pa.json | 82 + .../Creality/filament/fdm_filament_pc.json | 82 + .../Creality/filament/fdm_filament_pet.json | 82 + .../Creality/filament/fdm_filament_pla.json | 94 + .../Creality/filament/fdm_filament_tpu.json | 82 + .../Creality CR-10 Max 0.4 nozzle.json | 26 + .../Creality/machine/Creality CR-10 Max.json | 12 + .../machine/Creality CR-10 SE 0.2 nozzle.json | 128 ++ .../machine/Creality CR-10 SE 0.4 nozzle.json | 128 ++ .../machine/Creality CR-10 SE 0.6 nozzle.json | 128 ++ .../machine/Creality CR-10 SE 0.8 nozzle.json | 128 ++ .../Creality/machine/Creality CR-10 SE.json | 12 + .../machine/Creality CR-10 V2 0.4 nozzle.json | 110 + .../Creality/machine/Creality CR-10 V2.json | 12 + .../machine/Creality CR-6 Max 0.2 nozzle.json | 27 + .../machine/Creality CR-6 Max 0.4 nozzle.json | 26 + .../machine/Creality CR-6 Max 0.6 nozzle.json | 27 + .../machine/Creality CR-6 Max 0.8 nozzle.json | 27 + .../Creality/machine/Creality CR-6 Max.json | 11 + .../machine/Creality CR-6 SE 0.2 nozzle.json | 27 + .../machine/Creality CR-6 SE 0.4 nozzle.json | 26 + .../machine/Creality CR-6 SE 0.6 nozzle.json | 27 + .../machine/Creality CR-6 SE 0.8 nozzle.json | 27 + .../Creality/machine/Creality CR-6 SE.json | 12 + .../machine/Creality CR-M4 0.4 nozzle.json | 58 + .../Creality/machine/Creality CR-M4.json | 12 + .../machine/Creality Ender-3 0.2 nozzle.json | 114 ++ .../machine/Creality Ender-3 0.4 nozzle.json | 114 ++ .../machine/Creality Ender-3 0.6 nozzle.json | 114 ++ .../machine/Creality Ender-3 0.8 nozzle.json | 114 ++ .../Creality Ender-3 Pro 0.2 nozzle.json | 114 ++ .../Creality Ender-3 Pro 0.4 nozzle.json | 114 ++ .../Creality Ender-3 Pro 0.6 nozzle.json | 114 ++ .../Creality Ender-3 Pro 0.8 nozzle.json | 114 ++ .../machine/Creality Ender-3 Pro.json | 12 + .../Creality Ender-3 S1 0.4 nozzle.json | 110 + .../Creality Ender-3 S1 Plus 0.2 nozzle.json | 114 ++ .../Creality Ender-3 S1 Plus 0.4 nozzle.json | 114 ++ .../Creality Ender-3 S1 Plus 0.6 nozzle.json | 114 ++ .../Creality Ender-3 S1 Plus 0.8 nozzle.json | 115 ++ .../machine/Creality Ender-3 S1 Plus.json | 12 + .../Creality Ender-3 S1 Pro 0.4 nozzle.json | 113 ++ .../machine/Creality Ender-3 S1 Pro.json | 12 + .../Creality/machine/Creality Ender-3 S1.json | 12 + .../Creality Ender-3 V2 0.4 nozzle.json | 25 + .../Creality Ender-3 V2 Neo 0.4 nozzle.json | 88 + .../machine/Creality Ender-3 V2 Neo.json | 12 + .../Creality/machine/Creality Ender-3 V2.json | 12 + .../Creality Ender-3 V3 0.4 nozzle.json | 137 ++ .../Creality Ender-3 V3 0.6 nozzle.json | 137 ++ .../Creality Ender-3 V3 KE 0.4 nozzle.json | 129 ++ .../machine/Creality Ender-3 V3 KE.json | 12 + .../Creality Ender-3 V3 Plus 0.4 nozzle.json | 134 ++ .../Creality Ender-3 V3 Plus 0.6 nozzle.json | 134 ++ .../machine/Creality Ender-3 V3 Plus.json | 12 + .../Creality Ender-3 V3 SE 0.2 nozzle.json | 126 ++ .../Creality Ender-3 V3 SE 0.4 nozzle.json | 126 ++ .../Creality Ender-3 V3 SE 0.6 nozzle.json | 126 ++ .../Creality Ender-3 V3 SE 0.8 nozzle.json | 126 ++ .../machine/Creality Ender-3 V3 SE.json | 12 + .../Creality/machine/Creality Ender-3 V3.json | 12 + .../Creality/machine/Creality Ender-3.json | 12 + .../machine/Creality Ender-5 0.4 nozzle.json | 109 + .../Creality Ender-5 Max 0.4 nozzle.json | 112 ++ .../machine/Creality Ender-5 Max.json | 12 + .../Creality Ender-5 Plus 0.4 nozzle.json | 112 ++ .../machine/Creality Ender-5 Plus.json | 12 + ...reality Ender-5 Pro (2019) 0.2 nozzle.json | 32 + ...eality Ender-5 Pro (2019) 0.25 nozzle.json | 32 + ...reality Ender-5 Pro (2019) 0.3 nozzle.json | 32 + ...reality Ender-5 Pro (2019) 0.4 nozzle.json | 25 + ...reality Ender-5 Pro (2019) 0.5 nozzle.json | 32 + ...reality Ender-5 Pro (2019) 0.6 nozzle.json | 32 + ...reality Ender-5 Pro (2019) 0.8 nozzle.json | 32 + ...reality Ender-5 Pro (2019) 1.0 nozzle.json | 32 + .../machine/Creality Ender-5 Pro (2019).json | 12 + .../Creality Ender-5 S1 0.4 nozzle.json | 109 + .../Creality/machine/Creality Ender-5 S1.json | 12 + .../Creality/machine/Creality Ender-5.json | 12 + .../machine/Creality Ender-5S 0.4 nozzle.json | 109 + .../Creality/machine/Creality Ender-5S.json | 12 + .../machine/Creality Ender-6 0.4 nozzle.json | 109 + .../Creality/machine/Creality Ender-6.json | 12 + .../machine/Creality Hi 0.4 nozzle.json | 145 ++ .../machine/Creality Hi 0.6 nozzle.json | 145 ++ .../system/Creality/machine/Creality Hi.json | 13 + .../machine/Creality K1 (0.4 nozzle).json | 133 ++ .../machine/Creality K1 (0.6 nozzle).json | 133 ++ .../machine/Creality K1 (0.8 nozzle).json | 133 ++ .../machine/Creality K1 Max (0.4 nozzle).json | 134 ++ .../machine/Creality K1 Max (0.6 nozzle).json | 134 ++ .../machine/Creality K1 Max (0.8 nozzle).json | 134 ++ .../Creality/machine/Creality K1 Max.json | 12 + .../machine/Creality K1 SE 0.4 nozzle.json | 134 ++ .../Creality/machine/Creality K1 SE.json | 12 + .../system/Creality/machine/Creality K1.json | 12 + .../machine/Creality K1C 0.4 nozzle.json | 134 ++ .../machine/Creality K1C 0.6 nozzle.json | 134 ++ .../machine/Creality K1C 0.8 nozzle.json | 134 ++ .../system/Creality/machine/Creality K1C.json | 12 + .../machine/Creality K2 Plus 0.2 nozzle.json | 149 ++ .../machine/Creality K2 Plus 0.4 nozzle.json | 149 ++ .../machine/Creality K2 Plus 0.6 nozzle.json | 149 ++ .../machine/Creality K2 Plus 0.8 nozzle.json | 149 ++ .../Creality/machine/Creality K2 Plus.json | 12 + .../Creality Sermoon V1 0.4 nozzle.json | 73 + .../Creality/machine/Creality Sermoon V1.json | 15 + .../Creality/machine/fdm_creality_common.json | 139 ++ .../Creality/machine/fdm_machine_common.json | 120 ++ ...0.08mm SuperDetail @Creality CR-6 0.2.json | 24 + ...Detail @Creality Ender5Pro (2019) 0.2.json | 12 + ...etail @Creality Ender5Pro (2019) 0.25.json | 12 + ...Detail @Creality Ender5Pro (2019) 0.3.json | 12 + ...m SuperDetail @Creality Hi 0.4 nozzle.json | 117 ++ ...erDetail @Creality K2 Plus 0.2 nozzle.json | 110 + ...erDetail @Creality K2 Plus 0.4 nozzle.json | 110 + .../0.10mm HighDetail @Creality CR-6 0.4.json | 22 + .../0.10mm HighDetail @Creality CR-M4.json | 103 + ...Detail @Creality Ender5Pro (2019) 0.2.json | 12 + ...etail @Creality Ender5Pro (2019) 0.25.json | 12 + ...Detail @Creality Ender5Pro (2019) 0.3.json | 12 + ...ghDetail @Creality K2 Plus 0.2 nozzle.json | 110 + .../0.12mm Detail @Creality CR-6 0.2.json | 24 + .../0.12mm Detail @Creality CR-6 0.4.json | 17 + ...Detail @Creality Ender5Pro (2019) 0.2.json | 12 + ...etail @Creality Ender5Pro (2019) 0.25.json | 12 + ...Detail @Creality Ender5Pro (2019) 0.3.json | 12 + ...Detail @Creality Ender5Pro (2019) 0.5.json | 12 + ...m Detail @Creality K2 Plus 0.2 nozzle.json | 110 + ...m Detail @Creality K2 Plus 0.4 nozzle.json | 110 + .../0.12mm Fine @Creality CR10Max.json | 108 + .../0.12mm Fine @Creality CR10SE 0.2.json | 118 ++ .../0.12mm Fine @Creality CR10SE 0.4.json | 118 ++ .../0.12mm Fine @Creality CR10SE 0.6.json | 118 ++ .../0.12mm Fine @Creality CR10SE 0.8.json | 118 ++ .../0.12mm Fine @Creality Ender3 0.2.json | 108 + .../0.12mm Fine @Creality Ender3 0.4.json | 108 + .../0.12mm Fine @Creality Ender3 0.6.json | 108 + .../0.12mm Fine @Creality Ender3 0.8.json | 108 + .../0.12mm Fine @Creality Ender3 Pro 0.2.json | 108 + .../0.12mm Fine @Creality Ender3 Pro 0.4.json | 108 + .../0.12mm Fine @Creality Ender3 Pro 0.6.json | 108 + .../0.12mm Fine @Creality Ender3 Pro 0.8.json | 108 + .../0.12mm Fine @Creality Ender3V2.json | 108 + .../0.12mm Fine @Creality Ender3V2Neo.json | 108 + ...mm Fine @Creality Ender3V3 0.4 nozzle.json | 118 ++ .../0.12mm Fine @Creality Ender3V3KE.json | 120 ++ ...ine @Creality Ender3V3Plus 0.4 nozzle.json | 118 ++ .../0.12mm Fine @Creality Ender3V3SE 0.2.json | 111 + .../0.12mm Fine @Creality Ender3V3SE 0.4.json | 111 + .../0.12mm Fine @Creality Ender3V3SE 0.6.json | 111 + .../0.12mm Fine @Creality Ender3V3SE 0.8.json | 111 + ....12mm Fine @Creality Ender5Pro (2019).json | 108 + .../0.12mm Fine @Creality Hi 0.4 nozzle.json | 126 ++ ...0.12mm Fine @Creality K1 (0.4 nozzle).json | 118 ++ ....12mm Fine @Creality K1 SE 0.4 nozzle.json | 119 ++ .../0.12mm Fine @Creality K1C 0.4 nozzle.json | 118 ++ ...2mm Fine @Creality K1Max (0.4 nozzle).json | 118 ++ ... Optimal @Creality K2 Plus 0.2 nozzle.json | 110 + .../0.15mm Detail @Creality CR-M4.json | 103 + .../0.15mm Optimal @Creality CR10Max.json | 108 + .../0.15mm Optimal @Creality Ender3V2.json | 108 + ...mm Optimal @Creality Ender5Pro (2019).json | 108 + .../0.16mm Optimal @Creality CR-6 0.2.json | 23 + .../0.16mm Optimal @Creality CR-6 0.4.json | 52 + .../0.16mm Optimal @Creality CR-6 0.6.json | 24 + .../0.16mm Optimal @Creality CR10SE 0.2.json | 118 ++ .../0.16mm Optimal @Creality CR10SE 0.4.json | 118 ++ .../0.16mm Optimal @Creality CR10SE 0.6.json | 118 ++ .../0.16mm Optimal @Creality CR10SE 0.8.json | 118 ++ .../0.16mm Optimal @Creality CR10V2.json | 108 + .../0.16mm Optimal @Creality Ender3 0.2.json | 108 + .../0.16mm Optimal @Creality Ender3 0.4.json | 108 + .../0.16mm Optimal @Creality Ender3 0.6.json | 108 + .../0.16mm Optimal @Creality Ender3 0.8.json | 108 + ...16mm Optimal @Creality Ender3 Pro 0.2.json | 108 + ...16mm Optimal @Creality Ender3 Pro 0.4.json | 108 + ...16mm Optimal @Creality Ender3 Pro 0.6.json | 108 + ...16mm Optimal @Creality Ender3 Pro 0.8.json | 108 + .../0.16mm Optimal @Creality Ender3S1.json | 108 + ...mm Optimal @Creality Ender3S1Plus 0.2.json | 108 + ...mm Optimal @Creality Ender3S1Plus 0.4.json | 108 + ...mm Optimal @Creality Ender3S1Plus 0.6.json | 108 + ...mm Optimal @Creality Ender3S1Plus 0.8.json | 108 + .../0.16mm Optimal @Creality Ender3S1Pro.json | 108 + .../0.16mm Optimal @Creality Ender3V2Neo.json | 108 + ...Optimal @Creality Ender3V3 0.4 nozzle.json | 118 ++ .../0.16mm Optimal @Creality Ender3V3KE.json | 120 ++ ...mal @Creality Ender3V3Plus 0.4 nozzle.json | 118 ++ ...16mm Optimal @Creality Ender3V3SE 0.2.json | 111 + ...16mm Optimal @Creality Ender3V3SE 0.4.json | 111 + ...16mm Optimal @Creality Ender3V3SE 0.6.json | 111 + ...16mm Optimal @Creality Ender3V3SE 0.8.json | 111 + .../0.16mm Optimal @Creality Ender5.json | 108 + .../0.16mm Optimal @Creality Ender5Plus.json | 108 + ...ptimal @Creality Ender5Pro (2019) 0.2.json | 12 + ...timal @Creality Ender5Pro (2019) 0.25.json | 12 + ...ptimal @Creality Ender5Pro (2019) 0.3.json | 12 + ...ptimal @Creality Ender5Pro (2019) 0.5.json | 12 + ...ptimal @Creality Ender5Pro (2019) 0.6.json | 12 + .../0.16mm Optimal @Creality Ender5S.json | 108 + .../0.16mm Optimal @Creality Ender5S1.json | 108 + .../0.16mm Optimal @Creality Ender6.json | 108 + ....16mm Optimal @Creality Hi 0.4 nozzle.json | 119 ++ ...6mm Optimal @Creality K1 (0.4 nozzle).json | 118 ++ ...mm Optimal @Creality K1 SE 0.4 nozzle.json | 119 ++ ...16mm Optimal @Creality K1C 0.4 nozzle.json | 118 ++ ... Optimal @Creality K1Max (0.4 nozzle).json | 118 ++ ... Optimal @Creality K2 Plus 0.4 nozzle.json | 110 + .../0.16mm Optimal @Creality Sermoon V1.json | 112 ++ ...m Detail @Creality K2 Plus 0.6 nozzle.json | 110 + .../0.20mm Standard @Creality CR-6 0.4.json | 13 + .../0.20mm Standard @Creality CR-6 0.6.json | 21 + .../0.20mm Standard @Creality CR-M4.json | 103 + .../0.20mm Standard @Creality CR10Max.json | 108 + .../0.20mm Standard @Creality CR10SE 0.2.json | 118 ++ .../0.20mm Standard @Creality CR10SE 0.4.json | 118 ++ .../0.20mm Standard @Creality CR10SE 0.6.json | 118 ++ .../0.20mm Standard @Creality CR10SE 0.8.json | 118 ++ .../0.20mm Standard @Creality CR10V2.json | 108 + ...rd @Creality Ender-5 Max 0.4mm nozzle.json | 261 +++ .../0.20mm Standard @Creality Ender3 0.2.json | 108 + .../0.20mm Standard @Creality Ender3 0.4.json | 108 + .../0.20mm Standard @Creality Ender3 0.6.json | 108 + .../0.20mm Standard @Creality Ender3 0.8.json | 108 + ...0mm Standard @Creality Ender3 Pro 0.2.json | 108 + ...0mm Standard @Creality Ender3 Pro 0.4.json | 108 + ...0mm Standard @Creality Ender3 Pro 0.6.json | 108 + ...0mm Standard @Creality Ender3 Pro 0.8.json | 108 + .../0.20mm Standard @Creality Ender3.json | 108 + .../0.20mm Standard @Creality Ender3S1.json | 108 + ...m Standard @Creality Ender3S1Plus 0.2.json | 108 + ...m Standard @Creality Ender3S1Plus 0.4.json | 108 + ...m Standard @Creality Ender3S1Plus 0.6.json | 108 + ...m Standard @Creality Ender3S1Plus 0.8.json | 108 + ...0.20mm Standard @Creality Ender3S1Pro.json | 108 + .../0.20mm Standard @Creality Ender3V2.json | 108 + ...0.20mm Standard @Creality Ender3V2Neo.json | 108 + ...tandard @Creality Ender3V3 0.4 nozzle.json | 118 ++ .../0.20mm Standard @Creality Ender3V3KE.json | 121 ++ ...ard @Creality Ender3V3Plus 0.4 nozzle.json | 118 ++ ...0mm Standard @Creality Ender3V3SE 0.2.json | 111 + ...0mm Standard @Creality Ender3V3SE 0.4.json | 111 + ...0mm Standard @Creality Ender3V3SE 0.6.json | 111 + ...0mm Standard @Creality Ender3V3SE 0.8.json | 111 + .../0.20mm Standard @Creality Ender5.json | 108 + .../0.20mm Standard @Creality Ender5Plus.json | 108 + ...ndard @Creality Ender5Pro (2019) 0.25.json | 11 + ...andard @Creality Ender5Pro (2019) 0.3.json | 11 + ...andard @Creality Ender5Pro (2019) 0.5.json | 11 + ...andard @Creality Ender5Pro (2019) 0.6.json | 11 + ...andard @Creality Ender5Pro (2019) 0.8.json | 11 + ...m Standard @Creality Ender5Pro (2019).json | 108 + .../0.20mm Standard @Creality Ender5S.json | 108 + .../0.20mm Standard @Creality Ender5S1.json | 108 + .../0.20mm Standard @Creality Ender6.json | 108 + ...20mm Standard @Creality Hi 0.4 nozzle.json | 126 ++ ...mm Standard @Creality K1 (0.4 nozzle).json | 118 ++ .../0.20mm Standard @Creality K1 SE 0.4.json | 112 ++ ...0mm Standard @Creality K1C 0.4 nozzle.json | 118 ++ ...Standard @Creality K1Max (0.4 nozzle).json | 118 ++ ...Standard @Creality K2 Plus 0.4 nozzle.json | 110 + .../0.20mm Standard @Creality Sermoon V1.json | 112 ++ ...st @Creality Ender-5 Max 0.4mm nozzle.json | 263 +++ ...m Detail @Creality K2 Plus 0.8 nozzle.json | 110 + .../0.24mm Draft @Creality CR-6 0.4.json | 22 + .../0.24mm Draft @Creality CR-6 0.6.json | 22 + .../0.24mm Draft @Creality CR10Max.json | 108 + .../0.24mm Draft @Creality CR10SE 0.2.json | 118 ++ .../0.24mm Draft @Creality CR10SE 0.4.json | 118 ++ .../0.24mm Draft @Creality CR10SE 0.6.json | 118 ++ .../0.24mm Draft @Creality CR10SE 0.8.json | 118 ++ .../0.24mm Draft @Creality Ender3 0.2.json | 108 + .../0.24mm Draft @Creality Ender3 0.4.json | 108 + .../0.24mm Draft @Creality Ender3 0.6.json | 108 + .../0.24mm Draft @Creality Ender3 0.8.json | 108 + ...0.24mm Draft @Creality Ender3 Pro 0.2.json | 108 + ...0.24mm Draft @Creality Ender3 Pro 0.4.json | 108 + ...0.24mm Draft @Creality Ender3 Pro 0.6.json | 108 + ...0.24mm Draft @Creality Ender3 Pro 0.8.json | 108 + ...24mm Draft @Creality Ender3S1Plus 0.2.json | 108 + ...24mm Draft @Creality Ender3S1Plus 0.4.json | 108 + ...24mm Draft @Creality Ender3S1Plus 0.6.json | 108 + ...24mm Draft @Creality Ender3S1Plus 0.8.json | 108 + .../0.24mm Draft @Creality Ender3V2.json | 108 + .../0.24mm Draft @Creality Ender3V2Neo.json | 108 + ...m Draft @Creality Ender3V3 0.4 nozzle.json | 118 ++ .../0.24mm Draft @Creality Ender3V3KE.json | 120 ++ ...aft @Creality Ender3V3Plus 0.4 nozzle.json | 118 ++ ...0.24mm Draft @Creality Ender3V3SE 0.2.json | 111 + ...0.24mm Draft @Creality Ender3V3SE 0.4.json | 111 + ...0.24mm Draft @Creality Ender3V3SE 0.6.json | 111 + ...0.24mm Draft @Creality Ender3V3SE 0.8.json | 111 + ... Draft @Creality Ender5Pro (2019) 0.3.json | 11 + ... Draft @Creality Ender5Pro (2019) 0.5.json | 11 + ... Draft @Creality Ender5Pro (2019) 0.6.json | 11 + ... Draft @Creality Ender5Pro (2019) 0.8.json | 11 + ...24mm Draft @Creality Ender5Pro (2019).json | 108 + .../0.24mm Draft @Creality Hi 0.4 nozzle.json | 126 ++ ....24mm Draft @Creality K1 (0.4 nozzle).json | 118 ++ ...24mm Draft @Creality K1 SE 0.4 nozzle.json | 119 ++ ...0.24mm Draft @Creality K1C 0.4 nozzle.json | 118 ++ ...mm Draft @Creality K1Max (0.4 nozzle).json | 118 ++ ...mm Draft @Creality K2 Plus 0.4 nozzle.json | 110 + .../0.24mm Optimal @Creality CR-6 0.8.json | 23 + ...Optimal @Creality Ender3V3 0.6 nozzle.json | 118 ++ ...mal @Creality Ender3V3Plus 0.6 nozzle.json | 118 ++ ....24mm Optimal @Creality Hi 0.6 nozzle.json | 125 ++ ...4mm Optimal @Creality K1 (0.6 nozzle).json | 117 ++ ...24mm Optimal @Creality K1C 0.6 nozzle.json | 117 ++ ... Optimal @Creality K1Max (0.6 nozzle).json | 117 ++ ... Optimal @Creality K2 Plus 0.6 nozzle.json | 110 + .../0.28mm Standard @Creality Sermoon V1.json | 112 ++ .../0.28mm SuperDraft @Creality CR-6 0.4.json | 18 + .../0.28mm SuperDraft @Creality CR-6 0.6.json | 22 + ....28mm SuperDraft @Creality Ender3 0.2.json | 108 + ....28mm SuperDraft @Creality Ender3 0.4.json | 108 + ....28mm SuperDraft @Creality Ender3 0.6.json | 108 + ....28mm SuperDraft @Creality Ender3 0.8.json | 108 + ...m SuperDraft @Creality Ender3 Pro 0.2.json | 108 + ...m SuperDraft @Creality Ender3 Pro 0.4.json | 108 + ...m SuperDraft @Creality Ender3 Pro 0.6.json | 108 + ...m SuperDraft @Creality Ender3 Pro 0.8.json | 108 + ...rDraft @Creality Ender5Pro (2019) 0.5.json | 11 + ...rDraft @Creality Ender5Pro (2019) 0.6.json | 11 + ...rDraft @Creality Ender5Pro (2019) 0.8.json | 11 + ...rDraft @Creality Ender5Pro (2019) 1.0.json | 11 + ...perDraft @Creality K2 Plus 0.4 nozzle.json | 110 + ...tandard @Creality Ender3V3 0.6 nozzle.json | 117 ++ ...ard @Creality Ender3V3Plus 0.6 nozzle.json | 117 ++ ...30mm Standard @Creality Hi 0.6 nozzle.json | 125 ++ ...mm Standard @Creality K1 (0.6 nozzle).json | 117 ++ ...0mm Standard @Creality K1C 0.6 nozzle.json | 117 ++ ...Standard @Creality K1Max (0.6 nozzle).json | 117 ++ ...Standard @Creality K2 Plus 0.6 nozzle.json | 110 + .../0.32mm Chunky @Creality CR-6 0.6.json | 23 + ...2mm Optimal @Creality K1 (0.8 nozzle).json | 117 ++ ...32mm Optimal @Creality K1C 0.8 nozzle.json | 117 ++ ... Optimal @Creality K1Max (0.8 nozzle).json | 117 ++ ... Optimal @Creality K2 Plus 0.8 nozzle.json | 110 + .../0.32mm Standard @Creality CR-6 0.8.json | 23 + ...Chunky @Creality Ender5Pro (2019) 0.5.json | 11 + ...Chunky @Creality Ender5Pro (2019) 0.6.json | 11 + ...Chunky @Creality Ender5Pro (2019) 0.8.json | 11 + ...Chunky @Creality Ender5Pro (2019) 1.0.json | 11 + ...m Draft @Creality Ender3V3 0.6 nozzle.json | 117 ++ ...aft @Creality Ender3V3Plus 0.6 nozzle.json | 117 ++ .../0.36mm Draft @Creality Hi 0.6 nozzle.json | 125 ++ ....36mm Draft @Creality K1 (0.6 nozzle).json | 117 ++ ...0.36mm Draft @Creality K1C 0.6 nozzle.json | 117 ++ ...mm Draft @Creality K1Max (0.6 nozzle).json | 117 ++ ...mm Draft @Creality K2 Plus 0.6 nozzle.json | 110 + ...0.36mm SuperChunky @Creality CR-6 0.6.json | 23 + .../0.40mm Draft @Creality CR-6 0.8.json | 23 + ...mm Standard @Creality K1 (0.8 nozzle).json | 117 ++ ...0mm Standard @Creality K1C 0.8 nozzle.json | 117 ++ ...Standard @Creality K1Max (0.8 nozzle).json | 117 ++ ...Standard @Creality K2 Plus 0.8 nozzle.json | 110 + ...perDraft @Creality K2 Plus 0.6 nozzle.json | 110 + ...m SuperExtraChunky @Creality CR-6 0.6.json | 23 + .../0.48mm Chunky @Creality CR-6 0.8.json | 23 + .../0.48mm Draft @Creality CR-6 0.8.json | 23 + ....48mm Draft @Creality K1 (0.8 nozzle).json | 117 ++ ...0.48mm Draft @Creality K1C 0.8 nozzle.json | 117 ++ ...mm Draft @Creality K1Max (0.8 nozzle).json | 117 ++ ...mm Draft @Creality K2 Plus 0.8 nozzle.json | 110 + ...0.56mm SuperChunky @Creality CR-6 0.8.json | 23 + ...perDraft @Creality K2 Plus 0.8 nozzle.json | 110 + .../Creality/process/fdm_process_common.json | 70 + .../process/fdm_process_common_klipper.json | 16 + .../process/fdm_process_creality_common.json | 104 + .../fdm_process_creality_common_0_2.json | 20 + .../fdm_process_creality_common_0_25.json | 20 + .../fdm_process_creality_common_0_3.json | 19 + .../fdm_process_creality_common_0_5.json | 19 + .../fdm_process_creality_common_0_6.json | 19 + .../fdm_process_creality_common_0_8.json | 20 + .../fdm_process_creality_common_1_0.json | 20 + .config/OrcaSlicer/system/Custom.json | 274 +++ .../filament/Generic ABS @MyToolChanger.json | 51 + .../filament/Generic ASA @MyToolChanger.json | 51 + .../filament/Generic PA @MyToolChanger.json | 51 + .../Generic PA-CF @MyToolChanger.json | 51 + .../filament/Generic PC @MyToolChanger.json | 52 + .../filament/Generic PETG @MyToolChanger.json | 52 + .../filament/Generic PLA @MyToolChanger.json | 52 + .../Generic PLA-CF @MyToolChanger.json | 52 + .../filament/Generic PVA @MyToolChanger.json | 52 + .../filament/Generic TPU @MyToolChanger.json | 19 + .../Custom/machine/MyKlipper 0.2 nozzle.json | 26 + .../Custom/machine/MyKlipper 0.4 nozzle.json | 20 + .../Custom/machine/MyKlipper 0.6 nozzle.json | 26 + .../Custom/machine/MyKlipper 0.8 nozzle.json | 26 + .../system/Custom/machine/MyKlipper.json | 12 + .../Custom/machine/MyMarlin 0.4 nozzle.json | 44 + .../system/Custom/machine/MyMarlin.json | 12 + .../Custom/machine/MyRRF 0.4 nozzle.json | 19 + .../system/Custom/machine/MyRRF.json | 12 + .../machine/MyToolChanger 0.2 nozzle.json | 30 + .../machine/MyToolChanger 0.4 nozzle.json | 24 + .../machine/MyToolChanger 0.6 nozzle.json | 30 + .../machine/MyToolChanger 0.8 nozzle.json | 30 + .../system/Custom/machine/MyToolChanger.json | 12 + .../Custom/machine/fdm_klipper_common.json | 60 + .../Custom/machine/fdm_machine_common.json | 119 ++ .../system/Custom/machine/fdm_rrf_common.json | 141 ++ .../machine/fdm_toolchanger_common.json | 189 ++ .../process/0.08mm Extra Fine @MyKlipper.json | 19 + .../process/0.08mm Extra Fine @MyMarlin.json | 11 + .../process/0.08mm Extra Fine @MyRRF.json | 11 + .../0.08mm Extra Fine @MyToolChanger.json | 19 + .../process/0.12mm Fine @MyKlipper.json | 19 + .../Custom/process/0.12mm Fine @MyMarlin.json | 11 + .../Custom/process/0.12mm Fine @MyRRF.json | 11 + .../process/0.12mm Fine @MyToolChanger.json | 19 + .../process/0.15mm Optimal @MyKlipper.json | 20 + .../process/0.15mm Optimal @MyMarlin.json | 11 + .../Custom/process/0.15mm Optimal @MyRRF.json | 11 + .../0.15mm Optimal @MyToolChanger.json | 20 + .../process/0.16mm Optimal @MyKlipper.json | 20 + .../0.16mm Optimal @MyToolChanger.json | 20 + .../process/0.20mm Standard @MyKlipper.json | 14 + .../process/0.20mm Standard @MyMarlin.json | 11 + .../process/0.20mm Standard @MyRRF.json | 11 + .../0.20mm Standard @MyToolChanger.json | 14 + .../process/0.24mm Draft @MyKlipper.json | 17 + .../process/0.24mm Draft @MyMarlin.json | 12 + .../Custom/process/0.24mm Draft @MyRRF.json | 12 + .../process/0.24mm Draft @MyToolChanger.json | 17 + .../0.28mm Extra Draft @MyKlipper.json | 15 + .../process/0.28mm Extra Draft @MyMarlin.json | 12 + .../process/0.28mm Extra Draft @MyRRF.json | 12 + .../0.28mm Extra Draft @MyToolChanger.json | 15 + .../0.32mm Extra Draft @MyKlipper.json | 17 + .../0.32mm Extra Draft @MyToolChanger.json | 17 + .../0.40mm Extra Draft @MyKlipper.json | 16 + .../0.40mm Extra Draft @MyToolChanger.json | 16 + .../0.56mm Extra Draft @MyKlipper.json | 15 + .../0.56mm Extra Draft @MyToolChanger.json | 15 + .../Custom/process/fdm_process_common.json | 108 + .../process/fdm_process_klipper_common.json | 23 + .../process/fdm_process_marlin_common.json | 108 + .../fdm_process_mytoolchanger_common.json | 31 + .../process/fdm_process_rrf_common.json | 109 + .../system/OrcaFilamentLibrary.json | 768 +++++++ .../filament/AliZ/AliZ PA-CF @System.json | 9 + .../filament/AliZ/AliZ PA-CF @base.json | 77 + .../filament/AliZ/AliZ PETG @System.json | 9 + .../filament/AliZ/AliZ PETG @base.json | 56 + .../filament/AliZ/AliZ PETG-CF @System.json | 8 + .../filament/AliZ/AliZ PETG-CF @base.json | 74 + .../AliZ/AliZ PETG-Metal @System.json | 9 + .../filament/AliZ/AliZ PETG-Metal @base.json | 65 + .../filament/AliZ/AliZ PLA @System.json | 9 + .../filament/AliZ/AliZ PLA @base.json | 44 + .../filament/Bambu/Bambu ABS @System.json | 24 + .../filament/Bambu/Bambu ABS @base.json | 18 + .../filament/Bambu/Bambu ABS-GF @System.json | 15 + .../filament/Bambu/Bambu ABS-GF @base.json | 42 + .../filament/Bambu/Bambu ASA @System.json | 18 + .../filament/Bambu/Bambu ASA @base.json | 54 + .../Bambu/Bambu ASA-Aero @System.json | 9 + .../filament/Bambu/Bambu ASA-Aero @base.json | 63 + .../filament/Bambu/Bambu ASA-CF @System.json | 9 + .../filament/Bambu/Bambu ASA-CF @base.json | 62 + .../filament/Bambu/Bambu PA-CF @System.json | 27 + .../filament/Bambu/Bambu PA-CF @base.json | 39 + .../filament/Bambu/Bambu PA6-CF @System.json | 9 + .../filament/Bambu/Bambu PA6-CF @base.json | 48 + .../filament/Bambu/Bambu PA6-GF @System.json | 21 + .../filament/Bambu/Bambu PA6-GF @base.json | 45 + .../filament/Bambu/Bambu PAHT-CF @System.json | 12 + .../filament/Bambu/Bambu PAHT-CF @base.json | 45 + .../filament/Bambu/Bambu PC @System.json | 15 + .../filament/Bambu/Bambu PC @base.json | 17 + .../filament/Bambu/Bambu PC FR @System.json | 15 + .../filament/Bambu/Bambu PC FR @base.json | 20 + .../filament/Bambu/Bambu PET-CF @System.json | 15 + .../filament/Bambu/Bambu PET-CF @base.json | 90 + .../Bambu/Bambu PETG Basic @System.json | 18 + .../Bambu/Bambu PETG Basic @base.json | 72 + .../filament/Bambu/Bambu PETG HF @System.json | 30 + .../filament/Bambu/Bambu PETG HF @base.json | 77 + .../Bambu/Bambu PETG Translucent @System.json | 21 + .../Bambu/Bambu PETG Translucent @base.json | 78 + .../filament/Bambu/Bambu PETG-CF @System.json | 30 + .../filament/Bambu/Bambu PETG-CF @base.json | 77 + .../Bambu/Bambu PLA Aero @System.json | 15 + .../filament/Bambu/Bambu PLA Aero @base.json | 45 + .../Bambu/Bambu PLA Basic @System.json | 18 + .../filament/Bambu/Bambu PLA Basic @base.json | 35 + .../Bambu/Bambu PLA Dynamic @System.json | 18 + .../Bambu/Bambu PLA Dynamic @base.json | 17 + .../Bambu/Bambu PLA Galaxy @System.json | 15 + .../Bambu/Bambu PLA Galaxy @base.json | 23 + .../Bambu/Bambu PLA Glow @System.json | 15 + .../filament/Bambu/Bambu PLA Glow @base.json | 26 + .../Bambu/Bambu PLA Impact @System.json | 12 + .../Bambu/Bambu PLA Impact @base.json | 17 + .../Bambu/Bambu PLA Marble @System.json | 15 + .../Bambu/Bambu PLA Marble @base.json | 20 + .../Bambu/Bambu PLA Matte @System.json | 18 + .../filament/Bambu/Bambu PLA Matte @base.json | 32 + .../Bambu/Bambu PLA Metal @System.json | 12 + .../filament/Bambu/Bambu PLA Metal @base.json | 24 + .../Bambu/Bambu PLA Silk @System.json | 9 + .../filament/Bambu/Bambu PLA Silk @base.json | 39 + .../Bambu/Bambu PLA Silk+ @System.json | 15 + .../filament/Bambu/Bambu PLA Silk+ @base.json | 33 + .../Bambu/Bambu PLA Sparkle @System.json | 9 + .../Bambu/Bambu PLA Sparkle @base.json | 20 + .../Bambu/Bambu PLA Tough @System.json | 12 + .../filament/Bambu/Bambu PLA Tough @base.json | 23 + .../Bambu/Bambu PLA Wood @System.json | 9 + .../filament/Bambu/Bambu PLA Wood @base.json | 32 + .../filament/Bambu/Bambu PLA-CF @System.json | 24 + .../filament/Bambu/Bambu PLA-CF @base.json | 50 + .../filament/Bambu/Bambu PPA-CF @System.json | 9 + .../filament/Bambu/Bambu PPA-CF @base.json | 12 + .../filament/Bambu/Bambu PPS-CF @base.json | 39 + .../filament/Bambu/Bambu PVA @System.json | 15 + .../filament/Bambu/Bambu PVA @base.json | 33 + .../Bambu Support For PA PET @System.json | 12 + .../Bambu/Bambu Support For PA PET @base.json | 36 + .../Bambu/Bambu Support For PLA @System.json | 9 + .../Bambu/Bambu Support For PLA @base.json | 33 + .../Bambu Support For PLA-PETG @System.json | 21 + .../Bambu Support For PLA-PETG @base.json | 60 + .../Bambu/Bambu Support G @System.json | 9 + .../filament/Bambu/Bambu Support G @base.json | 39 + .../Bambu/Bambu Support W @System.json | 9 + .../filament/Bambu/Bambu Support W @base.json | 33 + .../Bambu/Bambu Support for ABS @System.json | 15 + .../Bambu/Bambu Support for ABS @base.json | 39 + .../filament/Bambu/Bambu TPU 95A @System.json | 12 + .../filament/Bambu/Bambu TPU 95A @base.json | 24 + .../Bambu/Bambu TPU 95A HF @System.json | 9 + .../Bambu/Bambu TPU 95A HF @base.json | 30 + .../filament/Generic ABS @System.json | 11 + .../filament/Generic ASA @System.json | 11 + .../filament/Generic BVOH @System.json | 9 + .../filament/Generic EVA @System.json | 10 + .../filament/Generic HIPS @System.json | 9 + .../filament/Generic PA @System.json | 11 + .../filament/Generic PA-CF @System.json | 14 + .../filament/Generic PC @System.json | 11 + .../filament/Generic PCTG @System.json | 9 + .../filament/Generic PE @System.json | 10 + .../filament/Generic PE-CF @System.json | 9 + .../filament/Generic PETG @System.json | 11 + .../filament/Generic PETG HF @System.json | 12 + .../filament/Generic PETG-CF @System.json | 24 + .../filament/Generic PHA @System.json | 10 + .../filament/Generic PLA @System.json | 10 + .../Generic PLA High Speed @System.json | 19 + .../filament/Generic PLA Matte @System.json | 15 + .../filament/Generic PLA Silk @System.json | 16 + .../filament/Generic PLA-CF @System.json | 17 + .../filament/Generic PP @System.json | 10 + .../filament/Generic PP-CF @System.json | 22 + .../filament/Generic PP-GF @System.json | 22 + .../filament/Generic PPA-CF @System.json | 21 + .../filament/Generic PPA-GF @System.json | 16 + .../filament/Generic PVA @System.json | 11 + .../filament/Generic SBS @System.json | 9 + .../filament/Generic TPU @System.json | 11 + .../Overture/Overture Matte PLA @System.json | 9 + .../Overture/Overture Matte PLA @base.json | 26 + .../Overture/Overture PLA @System.json | 9 + .../filament/Overture/Overture PLA @base.json | 26 + .../Polymaker/Fiberon PA12-CF @System.json | 9 + .../Polymaker/Fiberon PA12-CF @base.json | 71 + .../Polymaker/Fiberon PA6-CF @System.json | 9 + .../Polymaker/Fiberon PA6-CF @base.json | 68 + .../Polymaker/Fiberon PA6-GF @System.json | 9 + .../Polymaker/Fiberon PA6-GF @base.json | 71 + .../Polymaker/Fiberon PA612-CF @System.json | 9 + .../Polymaker/Fiberon PA612-CF @base.json | 41 + .../Polymaker/Fiberon PET-CF @System.json | 9 + .../Polymaker/Fiberon PET-CF @base.json | 86 + .../Polymaker/Fiberon PETG-ESD @System.json | 12 + .../Polymaker/Fiberon PETG-ESD @base.json | 74 + .../Polymaker/Fiberon PETG-rCF @System.json | 9 + .../Polymaker/Fiberon PETG-rCF @base.json | 77 + .../Polymaker/PolyLite ABS @System.json | 9 + .../Polymaker/PolyLite ABS @base.json | 23 + .../Polymaker/PolyLite ASA @System.json | 9 + .../Polymaker/PolyLite ASA @base.json | 41 + .../Polymaker/PolyLite Dual PLA @System.json | 10 + .../Polymaker/PolyLite PETG @System.json | 15 + .../Polymaker/PolyLite PETG @base.json | 59 + .../Polymaker/PolyLite PLA @System.json | 12 + .../Polymaker/PolyLite PLA @base.json | 17 + .../Polymaker/PolyTerra Dual PLA @System.json | 10 + .../Polymaker/PolyTerra PLA @System.json | 13 + .../Polymaker/PolyTerra PLA @base.json | 20 + .../SUNLU/SUNLU Marble PLA @System.json | 15 + .../SUNLU/SUNLU Marble PLA @base.json | 20 + .../filament/SUNLU/SUNLU PETG @System.json | 18 + .../filament/SUNLU/SUNLU PETG @base.json | 81 + .../SUNLU/SUNLU PLA Matte @System.json | 9 + .../filament/SUNLU/SUNLU PLA Matte @base.json | 50 + .../SUNLU/SUNLU PLA+ 2.0 @System.json | 9 + .../filament/SUNLU/SUNLU PLA+ 2.0 @base.json | 44 + .../filament/SUNLU/SUNLU PLA+ @System.json | 9 + .../filament/SUNLU/SUNLU PLA+ @base.json | 44 + .../SUNLU/SUNLU Silk PLA+ @System.json | 9 + .../filament/SUNLU/SUNLU Silk PLA+ @base.json | 51 + .../SUNLU/SUNLU Wood PLA @System.json | 9 + .../filament/SUNLU/SUNLU Wood PLA @base.json | 53 + .../filament/base/fdm_filament_abs.json | 94 + .../filament/base/fdm_filament_asa.json | 94 + .../filament/base/fdm_filament_bvoh.json | 89 + .../filament/base/fdm_filament_common.json | 187 ++ .../filament/base/fdm_filament_eva.json | 17 + .../filament/base/fdm_filament_hips.json | 86 + .../filament/base/fdm_filament_pa.json | 89 + .../filament/base/fdm_filament_pc.json | 92 + .../filament/base/fdm_filament_pctg.json | 68 + .../filament/base/fdm_filament_pe.json | 89 + .../filament/base/fdm_filament_pet.json | 68 + .../filament/base/fdm_filament_pha.json | 89 + .../filament/base/fdm_filament_pla.json | 89 + .../filament/base/fdm_filament_pla_silk.json | 15 + .../filament/base/fdm_filament_pp.json | 89 + .../filament/base/fdm_filament_ppa.json | 95 + .../filament/base/fdm_filament_pps.json | 85 + .../filament/base/fdm_filament_pva.json | 97 + .../filament/base/fdm_filament_sbs.json | 83 + .../filament/base/fdm_filament_tpu.json | 82 + .../filament/eSUN/eSUN PETG @System.json | 9 + .../filament/eSUN/eSUN PETG @base.json | 54 + .../filament/eSUN/eSUN PLA+ @System.json | 9 + .../filament/eSUN/eSUN PLA+ @base.json | 26 + .../filament/eSUN/eSUN ePLA-LW @System.json | 44 + ...Creality Ender-3 V3 0.4 nozzle - Copy.info | 5 + ...Creality Ender-3 V3 0.4 nozzle - Copy.json | 13 + .../machine/Creality Ender-3 V3 0.4.info | 5 + .../machine/Creality Ender-3 V3 0.4.json | 13 + ...m Optimal @Creality Ender-3 V3 - Copy.info | 5 + ...m Optimal @Creality Ender-3 V3 - Copy.json | 10 + .config/OrcaSlicer/user/hints.cereal | Bin 0 -> 12 bytes 721 files changed, 47715 insertions(+) create mode 100644 .config/OrcaSlicer/.gitignore create mode 100644 .config/OrcaSlicer/OrcaSlicer.conf create mode 100644 .config/OrcaSlicer/printers/BL-P001.json create mode 100644 .config/OrcaSlicer/printers/BL-P002.json create mode 100644 .config/OrcaSlicer/printers/C11.json create mode 100644 .config/OrcaSlicer/printers/C12.json create mode 100644 .config/OrcaSlicer/printers/C13.json create mode 100644 .config/OrcaSlicer/printers/N1.json create mode 100644 .config/OrcaSlicer/printers/N2S.json create mode 100644 .config/OrcaSlicer/printers/ams_load.gcode create mode 100644 .config/OrcaSlicer/printers/ams_unload.gcode create mode 100644 .config/OrcaSlicer/printers/filaments_blacklist.json create mode 100644 .config/OrcaSlicer/printers/version.txt create mode 100644 .config/OrcaSlicer/system/Creality.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-3V3-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-5Max-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Hi-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @K1-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @K2-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic ABS.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-3V3-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-5Max-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Hi-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @K1-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @K2-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic ASA-CF @Hi-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic ASA.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PA @Ender-5Max-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @Ender-3V3-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K1-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K2-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PC @K1-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PC.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-3V3-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-5Max-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Hi-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @K1-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @K2-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PETG-CF @Hi-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PETG.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-3V3-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-5Max-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Hi-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @K1-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @K2-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Hi-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K1-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K2-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Hi-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K1-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K2-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Hi-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K1-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K2-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Wood @Hi-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @Hi-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K1-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K2-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic PLA.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-3V3-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-5Max-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Hi-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @K1-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @K2-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Generic TPU.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality HF Generic PLA.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality HF Generic Speed PLA.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/Creality Silk PLA @Ender-5Max-all.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/fdm_filament_abs.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/fdm_filament_asa.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/fdm_filament_common.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/fdm_filament_pa.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/fdm_filament_pc.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/fdm_filament_pet.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/fdm_filament_pla.json create mode 100644 .config/OrcaSlicer/system/Creality/filament/fdm_filament_tpu.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-10 Max 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-10 Max.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.2 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-10 V2 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-10 V2.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.2 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.2 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-M4 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality CR-M4.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.2 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.2 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.2 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-3.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Max.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.2 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.25 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.3 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.5 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 1.0 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019).json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5 S1.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5S 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-5S.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-6 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Ender-6.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Hi 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Hi 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Hi.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K1 (0.4 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K1 (0.6 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K1 (0.8 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.4 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.6 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.8 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K1 Max.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K1 SE 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K1 SE.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K1.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K1C 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K1C 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K1C 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K1C.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.2 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality K2 Plus.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Sermoon V1 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/Creality Sermoon V1.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/fdm_creality_common.json create mode 100644 .config/OrcaSlicer/system/Creality/machine/fdm_machine_common.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality CR-6 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.25.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-6 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-M4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.25.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.3.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.25.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.3.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.5.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10Max.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3KE.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.15mm Detail @Creality CR-M4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality CR10Max.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender3V2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10V2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Plus.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.25.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.3.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.5.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S1.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Sermoon V1.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-M4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10Max.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10V2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3KE.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Plus.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.25.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.3.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.5.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S1.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Sermoon V1.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10Max.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3KE.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.3.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.5.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality CR-6 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm Standard @Creality Sermoon V1.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.5.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.32mm Chunky @Creality CR-6 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.32mm Standard @Creality CR-6 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.5.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 1.0.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.36mm SuperChunky @Creality CR-6 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.40mm Draft @Creality CR-6 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.44mm SuperExtraChunky @Creality CR-6 0.6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.48mm Chunky @Creality CR-6 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality CR-6 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.56mm SuperChunky @Creality CR-6 0.8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Creality/process/fdm_process_common.json create mode 100644 .config/OrcaSlicer/system/Creality/process/fdm_process_common_klipper.json create mode 100644 .config/OrcaSlicer/system/Creality/process/fdm_process_creality_common.json create mode 100644 .config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_2.json create mode 100644 .config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_25.json create mode 100644 .config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_3.json create mode 100644 .config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_5.json create mode 100644 .config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_6.json create mode 100644 .config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_8.json create mode 100644 .config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_1_0.json create mode 100644 .config/OrcaSlicer/system/Custom.json create mode 100644 .config/OrcaSlicer/system/Custom/filament/Generic ABS @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/filament/Generic ASA @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/filament/Generic PA @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/filament/Generic PA-CF @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/filament/Generic PC @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/filament/Generic PETG @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/filament/Generic PLA @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/filament/Generic PLA-CF @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/filament/Generic PVA @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/filament/Generic TPU @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/MyKlipper 0.2 nozzle.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/MyKlipper 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/MyKlipper 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/MyKlipper 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/MyKlipper.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/MyMarlin 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/MyMarlin.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/MyRRF 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/MyRRF.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.2 nozzle.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.4 nozzle.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.6 nozzle.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.8 nozzle.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/fdm_klipper_common.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/fdm_machine_common.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/fdm_rrf_common.json create mode 100644 .config/OrcaSlicer/system/Custom/machine/fdm_toolchanger_common.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyKlipper.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyMarlin.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyRRF.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyKlipper.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyMarlin.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyRRF.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyKlipper.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyMarlin.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyRRF.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.16mm Optimal @MyKlipper.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.16mm Optimal @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyKlipper.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyMarlin.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyRRF.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyKlipper.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyMarlin.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyRRF.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyKlipper.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyMarlin.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyRRF.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyKlipper.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyKlipper.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyKlipper.json create mode 100644 .config/OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyToolChanger.json create mode 100644 .config/OrcaSlicer/system/Custom/process/fdm_process_common.json create mode 100644 .config/OrcaSlicer/system/Custom/process/fdm_process_klipper_common.json create mode 100644 .config/OrcaSlicer/system/Custom/process/fdm_process_marlin_common.json create mode 100644 .config/OrcaSlicer/system/Custom/process/fdm_process_mytoolchanger_common.json create mode 100644 .config/OrcaSlicer/system/Custom/process/fdm_process_rrf_common.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPS-CF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ABS @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ASA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic BVOH @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic EVA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic HIPS @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PC @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PCTG @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG HF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PHA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Silk @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-GF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-GF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PVA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic SBS @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic TPU @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite Dual PLA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra Dual PLA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_common.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @System.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @base.json create mode 100644 .config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN ePLA-LW @System.json create mode 100644 .config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4 nozzle - Copy.info create mode 100644 .config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4 nozzle - Copy.json create mode 100644 .config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4.info create mode 100644 .config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4.json create mode 100644 .config/OrcaSlicer/user/default/process/0.16mm Optimal @Creality Ender-3 V3 - Copy.info create mode 100644 .config/OrcaSlicer/user/default/process/0.16mm Optimal @Creality Ender-3 V3 - Copy.json create mode 100644 .config/OrcaSlicer/user/hints.cereal diff --git a/.config/OrcaSlicer/.gitignore b/.config/OrcaSlicer/.gitignore new file mode 100644 index 0000000..ca3ba85 --- /dev/null +++ b/.config/OrcaSlicer/.gitignore @@ -0,0 +1,3 @@ +cache +log +ota diff --git a/.config/OrcaSlicer/OrcaSlicer.conf b/.config/OrcaSlicer/OrcaSlicer.conf new file mode 100644 index 0000000..49930b5 --- /dev/null +++ b/.config/OrcaSlicer/OrcaSlicer.conf @@ -0,0 +1,317 @@ +{ + "app": { + "allow_ip_resolve": true, + "auto_arrange": true, + "auto_calculate": true, + "auto_calculate_when_filament_change": true, + "auto_perspective": false, + "backup_interval": "10", + "backup_switch": true, + "camera_navigation_style": "0", + "check_stable_update_only": false, + "curr_bed_type": "4", + "dark_color_mode": "1", + "default_page": "0", + "developer_mode": false, + "download_path": "/home/vectorkappa/Downloads", + "drop_project_action": true, + "enable_multi_machine": false, + "enable_ssl_for_ftp": true, + "enable_ssl_for_mqtt": true, + "flush_multiplier": "0.300000", + "import_project_action": "2", + "internal_developer_mode": false, + "iot_environment": "3", + "keyboard_supported": "none/alt/control/shift", + "language": "en_GB", + "last_backup_path": "/tmp/orcaslicer_model/Sun_Jun_15/09_55_23#30846#49", + "last_export_path": "/home/vectorkappa/Nextcloud/3D", + "log_severity_level": "warning", + "max_recent_count": "18", + "max_send": "3", + "mouse_supported": "mouse left/mouse middle/mouse right", + "mouse_wheel": "0", + "move_view": "none/mouse left", + "open_device_tab_post_upload": true, + "precise_control": "none/mouse left", + "preset_folder": "", + "print_host_queue_dialog_column_0": "0", + "print_host_queue_dialog_column_1": "0", + "print_host_queue_dialog_column_2": "0", + "print_host_queue_dialog_column_3": "0", + "print_host_queue_dialog_column_4": "0", + "print_host_queue_dialog_column_5": "0", + "print_host_queue_dialog_height": "60", + "print_host_queue_dialog_width": "30", + "print_host_queue_dialog_x": "760", + "print_host_queue_dialog_y": "415", + "privacy_version": "00.00.00.00", + "project_load_behaviour": "ask_when_relevant", + "region": "Europe", + "remember_printer_config": true, + "reverse_mouse_wheel_zoom": false, + "rotate_view": "none/mouse left", + "sending_interval": "5", + "show_3d_navigator": true, + "show_build_edgets": false, + "show_daily_tips": true, + "show_gcode_window": true, + "show_hints": false, + "show_home_page": true, + "show_model_mesh": false, + "show_model_shadow": true, + "show_outline": false, + "show_printable_box": true, + "show_splash_screen": true, + "single_instance": true, + "slicer_uuid": "0ff5d283-2649-4f9d-9f68-11dca48fffe4", + "stealth_mode": true, + "sync_system_preset": true, + "sync_user_preset": false, + "tls_accepted_cert_store_location": "/etc/ssl/certs/ca-certificates.crt", + "tls_cert_store_accepted": "yes", + "toolkit_size": "100", + "units": "0", + "use_free_camera": false, + "use_inches": "0", + "use_perspective_camera": true, + "user_mode": "advanced", + "version": "01.10.01.50", + "window_layout": "layout2|name=sidebar;caption=;state=1996;dir=4;layer=0;row=0;pos=0;prop=100000;bestw=546;besth=1170;minw=-1;minh=-1;maxw=-1;maxh=-1;floatx=-1;floaty=-1;floatw=-1;floath=-1|name=main;caption=;state=256;dir=5;layer=0;row=0;pos=0;prop=100000;bestw=20;besth=20;minw=-1;minh=-1;maxw=-1;maxh=-1;floatx=-1;floaty=-1;floatw=-1;floath=-1|dock_size(5,0,0)=20|dock_size(4,0,0)=548|", + "window_mainframe": "22; 52; 1876; 1006; 0", + "zoom_to_mouse": false, + "zoom_view": "none/mouse left" + }, + "arrange": { + "enable_rotation_fff": true, + "min_object_distance_fff": "0" + }, + "custom_color_list": { + "10": "0,0,0,255", + "11": "0,0,0,255", + "12": "0,0,0,255", + "13": "0,0,0,255", + "14": "0,0,0,255", + "15": "0,0,0,255", + "16": "0,0,0,255", + "17": "0,0,0,255", + "18": "0,0,0,255", + "19": "0,0,0,255", + "20": "0,0,0,255", + "21": "0,0,0,255", + "22": "0,0,0,255", + "23": "0,0,0,255", + "24": "0,0,0,255", + "25": "0,0,0,255" + }, + "filaments": [ + "Creality Generic PETG", + "Creality Generic PETG @Ender-3V3-all", + "Creality Generic PETG @Ender-5Max-all", + "Creality Generic PETG @Hi-all", + "Creality Generic PETG @K1-all", + "Creality Generic PETG @K2-all", + "Creality Generic PLA", + "Creality Generic PLA @Ender-3V3-all", + "Creality Generic PLA @Ender-5Max-all", + "Creality Generic PLA @Hi-all", + "Creality Generic PLA @K1-all", + "Creality Generic PLA @K2-all", + "Creality Generic TPU", + "Creality Generic TPU @Ender-3V3-all", + "Creality Generic TPU @Ender-5Max-all", + "Creality Generic TPU @Hi-all", + "Creality Generic TPU @K1-all", + "Creality Generic TPU @K2-all", + "Generic PETG", + "Generic PETG @0.2 nozzle", + "Generic PETG @BBL A1", + "Generic PETG @BBL A1 0.2 nozzle", + "Generic PETG @BBL A1M", + "Generic PETG @BBL A1M 0.2 nozzle", + "Generic PETG @BBL P1P", + "Generic PETG @BBL P1P 0.2 nozzle", + "Generic PETG @Elegoo", + "Generic PETG @Flashforge AD4", + "Generic PETG @MyToolChanger", + "Generic PETG @System", + "Generic PLA", + "Generic PLA @0.2 nozzle", + "Generic PLA @BBL A1", + "Generic PLA @BBL A1 0.2 nozzle", + "Generic PLA @BBL A1M", + "Generic PLA @BBL A1M 0.2 nozzle", + "Generic PLA @BBL P1P", + "Generic PLA @BBL P1P 0.2 nozzle", + "Generic PLA @Elegoo", + "Generic PLA @Flashforge AD4", + "Generic PLA @MyToolChanger", + "Generic PLA @System", + "Generic PLA High Speed @BBL A1", + "Generic PLA High Speed @BBL A1 0.2 nozzle", + "Generic PLA High Speed @BBL A1M", + "Generic PLA High Speed @BBL A1M 0.2 nozzle", + "Generic PLA High Speed @BBL P1P", + "Generic PLA High Speed @BBL P1P 0.2 nozzle", + "Generic PLA High Speed @BBL X1C", + "Generic PLA High Speed @BBL X1C 0.2 nozzle", + "Generic PLA High Speed @Flashforge AD4", + "Generic PLA High Speed @System", + "Generic PLA Matte @Elegoo", + "Generic PLA Matte @System", + "Generic PLA Silk", + "Generic PLA Silk @BBL A1", + "Generic PLA Silk @BBL A1M", + "Generic PLA Silk @BBL P1P", + "Generic PLA Silk @Flashforge AD4", + "Generic PLA Silk @System", + "Generic TPU", + "Generic TPU @Anycubic Kobra 3 0.4 nozzle", + "Generic TPU @BBL A1", + "Generic TPU @BBL A1M", + "Generic TPU @BBL P1P", + "Generic TPU @Flashforge AD4", + "Generic TPU @MyToolChanger", + "Generic TPU @System", + "SUNLU PETG @BBL A1", + "SUNLU PETG @BBL A1 0.2 nozzle", + "SUNLU PETG @BBL A1 0.8 nozzle", + "SUNLU PETG @BBL A1M 0.2 nozzle", + "SUNLU PETG @BBL A1M 0.4 nozzle", + "SUNLU PETG @BBL A1M 0.8 nozzle", + "SUNLU PETG @BBL X1C", + "SUNLU PETG @BBL X1C 0.2 nozzle", + "SUNLU PETG @BBL X1C 0.8 nozzle", + "SUNLU PETG @FF AD3", + "SUNLU PETG @FF AD5M", + "SUNLU PETG @FF AD5M 0.25 nozzle", + "SUNLU PETG @FF AD5M 0.8 nozzle", + "SUNLU PETG @System", + "SUNLU PLA Matte @BBL A1", + "SUNLU PLA Matte @BBL A1 0.2 nozzle", + "SUNLU PLA Matte @BBL A1M", + "SUNLU PLA Matte @BBL A1M 0.2 nozzle", + "SUNLU PLA Matte @BBL P1P", + "SUNLU PLA Matte @BBL P1P 0.2 nozzle", + "SUNLU PLA Matte @BBL X1", + "SUNLU PLA Matte @BBL X1C", + "SUNLU PLA Matte @BBL X1C 0.2 nozzle", + "SUNLU PLA Matte @FF AD3", + "SUNLU PLA Matte @FF AD5M", + "SUNLU PLA Matte @FF AD5M 0.25 nozzle", + "SUNLU PLA Matte @System", + "SUNLU PLA+ @BBL A1", + "SUNLU PLA+ @BBL A1 0.2 nozzle", + "SUNLU PLA+ @BBL A1M", + "SUNLU PLA+ @BBL A1M 0.2 nozzle", + "SUNLU PLA+ @BBL P1P", + "SUNLU PLA+ @BBL P1P 0.2 nozzle", + "SUNLU PLA+ @BBL X1", + "SUNLU PLA+ @BBL X1C", + "SUNLU PLA+ @BBL X1C 0.2 nozzle", + "SUNLU PLA+ @FF AD3", + "SUNLU PLA+ @FF AD5M", + "SUNLU PLA+ @FF AD5M 0.25 nozzle", + "SUNLU PLA+ @System" + ], + "firstguide": { + "finish": true + }, + "font": { + "active_font": "0" + }, + "font:1": { + "depth": "1.000000", + "descriptor": "Lexend Deca Medium 11", + "line_height": "11.000000", + "name": "NORMAL" + }, + "font:2": { + "depth": "1.000000", + "descriptor": "Sans 9", + "line_height": "9.000000", + "name": "SMALL" + }, + "font:3": { + "depth": "1.000000", + "descriptor": "Serif Italic 11", + "line_height": "11.000000", + "name": "ITALIC" + }, + "font:4": { + "depth": "1.000000", + "descriptor": "Sans 11", + "line_height": "11.000000", + "name": "SWISS" + }, + "font:5": { + "depth": "1.000000", + "descriptor": "Monospace Bold 10", + "line_height": "10.000000", + "name": "MODERN" + }, + "header": "OrcaSlicer 2.3.0", + "models": [ + { + "model": "Creality Ender-3 V3", + "nozzle_diameter": "0.4", + "vendor": "Creality" + } + ], + "orca_presets": [ + { + "curr_bed_type": "4", + "filament": "Creality Generic PLA @Ender-3V3-all", + "filament_colors": "#000000", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Creality Ender-3 V3 0.4", + "process": "0.20mm Standard @Creality Ender-3 V3" + }, + { + "curr_bed_type": "4", + "filament": "Creality Generic PLA @Ender-3V3-all", + "filament_colors": "#26A69A", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Creality Ender-3 V3 0.4 nozzle", + "process": "0.16mm Optimal @Creality Ender-3 V3" + }, + { + "curr_bed_type": "4", + "filament": "Creality Generic PLA @Ender-3V3-all", + "filament_colors": "#000000", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Creality Ender-3 V3 0.4 nozzle - Copy", + "process": "0.16mm Optimal @Creality Ender-3 V3 - Copy" + }, + { + "curr_bed_type": "3", + "filament": "AliZ PLA @System", + "filament_colors": "#26A69A", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Default Printer", + "process": "Default Setting" + } + ], + "presets": { + "filaments": null, + "machine": "Creality Ender-3 V3 0.4" + }, + "print": { + "bed_leveling": "1", + "flow_cali": "1", + "timelapse": "1" + }, + "recent": { + "last_opened_folder": "/home/vectorkappa/Nextcloud/3D", + "printhost_path": "", + "settings_folder": "/home/vectorkappa/Nextcloud/3D" + }, + "recent_projects": { + "01": "/home/vectorkappa/Nextcloud/3D/Multiboard.3mf", + "02": "/home/vectorkappa/Nextcloud/3D/3DPrints/all-armor-parts.3mf" + } +} diff --git a/.config/OrcaSlicer/printers/BL-P001.json b/.config/OrcaSlicer/printers/BL-P001.json new file mode 100644 index 0000000..0004806 --- /dev/null +++ b/.config/OrcaSlicer/printers/BL-P001.json @@ -0,0 +1,88 @@ +{ + "00.00.00.00": { + "display_name": "Bambu Lab X1 Carbon", + "print": { + "ipcam": { + "resolution_supported": [ "720p", "1080p" ], + "virtual_camera": "enabled", + "liveview": { + "remote": "tutk" + }, + "file": { + "remote": "tutk", + "model_download": "enabled" + } + }, + "support_motor_noise_cali":false, + "support_tunnel_mqtt":false, + "support_mqtt_alive":false, + "support_command_ams_switch":false, + "support_cloud_print_only":false, + "support_1080dpi":false, + "support_prompt_sound":false, + "support_ams_humidity":false, + "support_auto_recovery_step_loss":false, + "support_auto_leveling":true, + "support_update_remain":false, + "support_timelapse":true, + "support_filament_backup":false, + "support_chamber_fan":true, + "support_aux_fan":true, + "support_send_to_sd":false, + "support_print_all":true, + "support_print_without_sd":true, + "support_flow_calibration":true, + "support_build_plate_marker_detect":false, + "support_lidar_calibration":true, + "support_ai_monitoring":false, + "support_first_layer_inspect":true, + "support_chamber_temp_edit":false, + "support_extrusion_cali":false, + "support_user_preset":false + }, + "model_id":"BL-P001", + "compatible_machine":["BL-P002", "C11", "C12", "C13"], + "printer_type":"3DPrinter-X1-Carbon", + "printer_thumbnail_image":"printer_thumbnail", + "printer_connect_help_image":"input_access_code_x1", + "printer_use_ams_image":"ams_icon", + "use_ams_type":"generic", + "printer_arch":"core_xy", + "printer_series":"series_x1", + "has_cali_line":true, + "printer_is_enclosed":true + }, + "01.01.01.00": { + "print": { + "support_1080dpi":true, + "support_ams_humidity":true, + "support_update_remain":true, + "support_auto_recovery_step_loss":true, + "support_filament_backup":true, + "support_send_to_sd":true, + "support_build_plate_marker_detect":true, + "support_ai_monitoring":true + } + }, + "01.05.06.01" : { + "print": { + "support_command_ams_switch":true + } + }, + "01.05.06.05" : { + "engineer":"00.03.10.05", + "print": { + "support_mqtt_alive":true + } + }, + "01.05.06.06": { + "print": { + "support_tunnel_mqtt":true + } + }, + "01.06.06.00": { + "print": { + "support_user_preset":true + } + } +} \ No newline at end of file diff --git a/.config/OrcaSlicer/printers/BL-P002.json b/.config/OrcaSlicer/printers/BL-P002.json new file mode 100644 index 0000000..3c2e7ed --- /dev/null +++ b/.config/OrcaSlicer/printers/BL-P002.json @@ -0,0 +1,88 @@ +{ + "00.00.00.00": { + "display_name": "Bambu Lab X1", + "print": { + "ipcam": { + "resolution_supported": [ "720p", "1080p" ], + "virtual_camera": "enabled", + "liveview": { + "remote": "tutk" + }, + "file": { + "remote": "tutk", + "model_download": "enabled" + } + }, + "support_motor_noise_cali":false, + "support_tunnel_mqtt":false, + "support_mqtt_alive":false, + "support_command_ams_switch":false, + "support_cloud_print_only":false, + "support_1080dpi":false, + "support_prompt_sound":false, + "support_ams_humidity":false, + "support_auto_recovery_step_loss":false, + "support_auto_leveling":true, + "support_update_remain":false, + "support_timelapse":true, + "support_filament_backup":false, + "support_chamber_fan":true, + "support_aux_fan":true, + "support_send_to_sd":false, + "support_print_all":true, + "support_print_without_sd":true, + "support_flow_calibration":true, + "support_build_plate_marker_detect":false, + "support_lidar_calibration":true, + "support_ai_monitoring":false, + "support_first_layer_inspect":true, + "support_chamber_temp_edit":false, + "support_extrusion_cali":false, + "support_user_preset":false + }, + "model_id": "BL-P002", + "compatible_machine":["BL-P001", "C11", "C12", "C13"], + "printer_type": "3DPrinter-X1", + "printer_thumbnail_image": "printer_thumbnail", + "printer_connect_help_image": "input_access_code_x1", + "printer_use_ams_image":"ams_icon", + "use_ams_type":"generic", + "printer_arch" : "core_xy", + "printer_series":"series_x1", + "has_cali_line":true, + "printer_is_enclosed":true + }, + "01.01.01.00": { + "print": { + "support_1080dpi":true, + "support_ams_humidity":true, + "support_update_remain":true, + "support_auto_recovery_step_loss":true, + "support_filament_backup":true, + "support_send_to_sd":true, + "support_build_plate_marker_detect":true, + "support_ai_monitoring":true + } + }, + "01.05.06.01" : { + "print": { + "support_command_ams_switch":true + } + }, + "01.05.06.05" : { + "engineer":"00.03.10.05", + "print": { + "support_mqtt_alive":true + } + }, + "01.05.06.06": { + "print": { + "support_tunnel_mqtt":true + } + }, + "01.06.06.00": { + "print": { + "support_user_preset":true + } + } +} \ No newline at end of file diff --git a/.config/OrcaSlicer/printers/C11.json b/.config/OrcaSlicer/printers/C11.json new file mode 100644 index 0000000..a2cbbb0 --- /dev/null +++ b/.config/OrcaSlicer/printers/C11.json @@ -0,0 +1,88 @@ +{ + "00.00.00.00": { + "display_name": "Bambu Lab P1P", + "print": { + "ipcam": { + "resolution_supported": [ "720p" ], + "liveview": { + "local": "local" + } + }, + "support_motor_noise_cali":false, + "support_tunnel_mqtt":false, + "support_mqtt_alive":false, + "support_command_ams_switch":false, + "support_cloud_print_only":true, + "support_1080dpi":false, + "support_prompt_sound":false, + "support_ams_humidity":true, + "support_auto_recovery_step_loss":true, + "support_auto_leveling":true, + "support_update_remain":true, + "support_timelapse":true, + "support_filament_backup":true, + "support_chamber_fan":true, + "support_aux_fan":true, + "support_send_to_sd":false, + "support_print_all":false, + "support_print_without_sd":false, + "support_flow_calibration":false, + "support_build_plate_marker_detect":false, + "support_lidar_calibration":false, + "support_ai_monitoring":false, + "support_first_layer_inspect":false, + "support_chamber_temp_edit":false, + "support_extrusion_cali":true, + "support_user_preset":false, + "bed_temperature_limit": 100 + }, + "model_id": "C11", + "compatible_machine":["BL-P001", "BL-P002", "C12", "C13"], + "printer_type": "C11", + "ftp_folder" : "sdcard/", + "printer_thumbnail_image": "printer_thumbnail_p1p", + "printer_connect_help_image": "input_access_code_p1p", + "printer_use_ams_image":"ams_icon", + "use_ams_type":"generic", + "printer_arch" : "core_xy", + "printer_series":"series_p1p", + "has_cali_line":false, + "printer_is_enclosed":false + }, + "01.02.00.00": { + "print": { + "support_send_to_sd":true + } + }, + "01.02.99.00": { + "print": { + "ipcam": { + "liveview": { + "remote": "tutk" + } + } + } + }, + "01.02.99.10" : { + "print": { + "support_command_ams_switch":true + } + }, + "01.03.50.01" : { + "engineer":"00.06.03.51", + "print": { + "support_mqtt_alive":true, + "support_tunnel_mqtt":true + } + }, + "01.04.50.01": { + "print": { + "ipcam": { + "file": { + "remote": "tutk" + } + }, + "support_user_preset":true + } + } +} diff --git a/.config/OrcaSlicer/printers/C12.json b/.config/OrcaSlicer/printers/C12.json new file mode 100644 index 0000000..5cc12a1 --- /dev/null +++ b/.config/OrcaSlicer/printers/C12.json @@ -0,0 +1,80 @@ +{ + "00.00.00.00": { + "display_name": "Bambu Lab P1S", + "print": { + "ipcam": { + "resolution_supported": [ "720p" ], + "liveview": { + "local": "local" + } + }, + "support_motor_noise_cali":false, + "support_tunnel_mqtt":false, + "support_mqtt_alive":false, + "support_command_ams_switch":false, + "support_cloud_print_only":true, + "support_1080dpi":false, + "support_prompt_sound":false, + "support_ams_humidity":true, + "support_auto_recovery_step_loss":true, + "support_auto_leveling":true, + "support_update_remain":true, + "support_timelapse":true, + "support_filament_backup":true, + "support_chamber_fan":true, + "support_aux_fan":true, + "support_send_to_sd":true, + "support_print_all":false, + "support_print_without_sd":false, + "support_flow_calibration":false, + "support_build_plate_marker_detect":false, + "support_lidar_calibration":false, + "support_ai_monitoring":false, + "support_first_layer_inspect":false, + "support_chamber_temp_edit":false, + "support_extrusion_cali":true, + "support_user_preset":false, + "bed_temperature_limit": 100 + }, + "model_id": "C12", + "compatible_machine":["BL-P001", "BL-P002", "C11", "C13"], + "printer_type": "C12", + "ftp_folder" : "sdcard/", + "printer_thumbnail_image": "printer_thumbnail_p1s", + "printer_connect_help_image": "input_access_code_p1p", + "printer_use_ams_image":"ams_icon", + "use_ams_type":"generic", + "printer_arch" : "core_xy", + "printer_series":"series_p1p", + "has_cali_line":false, + "printer_is_enclosed":true + }, + "01.02.99.10" : { + "print": { + "support_command_ams_switch":true + } + }, + "01.03.50.01": { + "engineer":"00.06.03.51", + "resolution_supported": [ "720p" ], + "print": { + "ipcam": { + "liveview": { + "remote": "tutk" + } + }, + "support_mqtt_alive":true, + "support_tunnel_mqtt":true + } + }, + "01.04.50.01": { + "print": { + "ipcam": { + "file": { + "remote": "tutk" + } + }, + "support_user_preset":true + } + } +} diff --git a/.config/OrcaSlicer/printers/C13.json b/.config/OrcaSlicer/printers/C13.json new file mode 100644 index 0000000..44c4ecd --- /dev/null +++ b/.config/OrcaSlicer/printers/C13.json @@ -0,0 +1,61 @@ +{ + "00.00.00.00": { + "display_name": "Bambu Lab X1E", + "print": { + "ipcam": { + "resolution_supported": [ "720p", "1080p" ], + "virtual_camera": "enabled", + "liveview": { + "remote": "tutk" + }, + "file": { + "remote": "tutk", + "model_download": "enabled" + } + }, + "support_motor_noise_cali":false, + "support_tunnel_mqtt":true, + "support_mqtt_alive":true, + "support_command_ams_switch":true, + "support_ssl_for_mqtt":true, + "support_cloud_print_only":false, + "support_1080dpi":true, + "support_prompt_sound":false, + "support_ams_humidity":true, + "support_auto_recovery_step_loss":true, + "support_auto_leveling":true, + "support_update_remain":true, + "support_timelapse":true, + "support_filament_backup":true, + "support_chamber_fan":true, + "support_aux_fan":true, + "support_send_to_sd":true, + "support_print_all":true, + "support_print_without_sd":true, + "support_flow_calibration":true, + "support_build_plate_marker_detect":true, + "support_lidar_calibration":true, + "support_ai_monitoring":true, + "support_first_layer_inspect":true, + "support_chamber_temp_edit":true, + "support_extrusion_cali":false, + "support_user_preset":false, + "bed_temperature_limit": 110, + "nozzle_max_temperature": 320 + }, + "model_id": "C13", + "compatible_machine":["BL-P001", "BL-P002", "C11", "C12"], + "printer_type": "C13", + "printer_thumbnail_image": "printer_thumbnail", + "printer_connect_help_image": "input_access_code_x1", + "printer_use_ams_image":"ams_icon", + "use_ams_type":"generic", + "printer_arch" : "core_xy", + "printer_series":"series_x1", + "has_cali_line":true, + "printer_is_enclosed":true + }, + "01.05.06.06": { + "rv2166": "00.00.21.20" + } +} \ No newline at end of file diff --git a/.config/OrcaSlicer/printers/N1.json b/.config/OrcaSlicer/printers/N1.json new file mode 100644 index 0000000..ac161ed --- /dev/null +++ b/.config/OrcaSlicer/printers/N1.json @@ -0,0 +1,62 @@ +{ + "00.00.00.00": { + "display_name": "Bambu Lab A1 mini", + "print": { + "ipcam": { + "resolution_supported": [ "720p" ], + "liveview": { + "local": "local", + "remote": "tutk" + } + }, + "support_motor_noise_cali":true, + "support_tunnel_mqtt":true, + "support_mqtt_alive":true, + "support_command_ams_switch":true, + "support_cloud_print_only":true, + "support_1080dpi":true, + "support_prompt_sound":true, + "support_ams_humidity":false, + "support_auto_recovery_step_loss":true, + "support_auto_leveling":true, + "support_update_remain":false, + "support_timelapse":true, + "support_filament_backup":true, + "support_chamber_fan":false, + "support_aux_fan":false, + "support_send_to_sd":true, + "support_print_all":false, + "support_print_without_sd":false, + "support_flow_calibration":true, + "support_lidar_calibration":false, + "support_ai_monitoring":false, + "support_first_layer_inspect":false, + "support_chamber_temp_edit":false, + "support_extrusion_cali":true, + "support_user_preset":false, + "bed_temperature_limit": 100 + }, + "model_id": "N1", + "compatible_machine":[], + "printer_type": "N1", + "ftp_folder" : "sdcard/", + "printer_thumbnail_image": "printer_thumbnail_n1", + "printer_connect_help_image": "input_access_code_n1", + "printer_use_ams_image":"extra_icon", + "use_ams_type":"f1", + "printer_arch" : "i3", + "printer_series":"series_p1p", + "has_cali_line":false, + "printer_is_enclosed":false + }, + "01.01.50.01": { + "print": { + "ipcam": { + "file": { + "remote": "tutk" + } + }, + "support_user_preset":true + } + } +} \ No newline at end of file diff --git a/.config/OrcaSlicer/printers/N2S.json b/.config/OrcaSlicer/printers/N2S.json new file mode 100644 index 0000000..a87b08d --- /dev/null +++ b/.config/OrcaSlicer/printers/N2S.json @@ -0,0 +1,61 @@ +{ + "00.00.00.00": { + "display_name": "Bambu Lab A1", + "print": { + "ipcam": { + "resolution_supported": [ "720p" ], + "liveview": { + "local": "local", + "remote": "tutk" + } + }, + "support_motor_noise_cali":true, + "support_tunnel_mqtt":true, + "support_mqtt_alive":true, + "support_command_ams_switch":true, + "support_cloud_print_only":true, + "support_1080dpi":true, + "support_prompt_sound":true, + "support_ams_humidity":false, + "support_auto_recovery_step_loss":true, + "support_auto_leveling":true, + "support_update_remain":false, + "support_timelapse":true, + "support_filament_backup":true, + "support_chamber_fan":false, + "support_aux_fan":false, + "support_send_to_sd":true, + "support_print_all":false, + "support_print_without_sd":false, + "support_flow_calibration":true, + "support_lidar_calibration":false, + "support_ai_monitoring":false, + "support_first_layer_inspect":false, + "support_chamber_temp_edit":false, + "support_extrusion_cali":true, + "support_user_preset":true, + "bed_temperature_limit": 100 + }, + "model_id": "N2S", + "compatible_machine":[], + "printer_type": "N2S", + "ftp_folder" : "sdcard/", + "printer_thumbnail_image": "printer_thumbnail_n2s", + "printer_connect_help_image": "input_access_code_n1", + "printer_use_ams_image":"extra_icon", + "use_ams_type":"f1", + "printer_arch" : "i3", + "printer_series":"series_p1p", + "has_cali_line":false, + "printer_is_enclosed":false + }, + "01.01.50.01": { + "print": { + "ipcam": { + "file": { + "remote": "tutk" + } + } + } + } +} \ No newline at end of file diff --git a/.config/OrcaSlicer/printers/ams_load.gcode b/.config/OrcaSlicer/printers/ams_load.gcode new file mode 100644 index 0000000..5f2cc89 --- /dev/null +++ b/.config/OrcaSlicer/printers/ams_load.gcode @@ -0,0 +1,51 @@ +M620 S[next_extruder] +M106 S255 +M104 S250 +M17 S +M17 X0.5 Y0.5 +G91 +G1 Y-5 F1200 +G1 Z3 +G90 +G28 X +M17 R +G1 X70 F21000 +G1 Y245 +G1 Y265 F3000 +G4 +M106 S0 +M109 S250 +G1 X90 +G1 Y255 +G1 X120 +G1 X20 Y50 F21000 +G1 Y-3 +T[next_extruder] +G1 X54 +G1 Y265 +G92 E0 +G1 E40 F180 +G4 +M104 S[new_filament_temp] +G1 X70 F15000 +G1 X76 +G1 X65 +G1 X76 +G1 X65 +G1 X90 F3000 +G1 Y255 +G1 X100 +G1 Y265 +G1 X70 F10000 +G1 X100 F5000 +G1 X70 F10000 +G1 X100 F5000 +G1 X165 F12000 +G1 Y245 +G1 X70 +G1 Y265 F3000 +G91 +G1 Z-3 F1200 +G90 +M621 S[next_extruder] + diff --git a/.config/OrcaSlicer/printers/ams_unload.gcode b/.config/OrcaSlicer/printers/ams_unload.gcode new file mode 100644 index 0000000..9bfd374 --- /dev/null +++ b/.config/OrcaSlicer/printers/ams_unload.gcode @@ -0,0 +1,33 @@ +M620 S255 +M106 P1 S255 +M104 S250 +M17 S +M17 X0.5 Y0.5 +G91 +G1 Y-5 F3000 +G1 Z3 F1200 +G90 +G28 X +M17 R +G1 X70 F21000 +G1 Y245 +G1 Y265 F3000 +G4 +M106 P1 S0 +M109 S250 +G1 X90 F3000 +G1 Y255 F4000 +G1 X100 F5000 +G1 X120 F21000 +G1 X20 Y50 +G1 Y-3 +T255 +G4 +M104 S0 +G1 X70 F3000 + +G91 +G1 Z-3 F1200 +G90 +M621 S255 + diff --git a/.config/OrcaSlicer/printers/filaments_blacklist.json b/.config/OrcaSlicer/printers/filaments_blacklist.json new file mode 100644 index 0000000..375b3c0 --- /dev/null +++ b/.config/OrcaSlicer/printers/filaments_blacklist.json @@ -0,0 +1,60 @@ +{ + "whitelist": [ + ], + "blacklist": [ + { + "vendor": "Third Party", + "type": "TPU", + "action": "prohibition", + "description": "TPU: not supported" + }, + { + "vendor": "Bambulab", + "type": "TPU", + "action": "prohibition", + "description": "TPU: not supported" + }, + { + "vendor": "Third Party", + "type": "PVA", + "action": "warning", + "description": "PVA: flexible" + }, + { + "vendor": "Third Party", + "type": "PLA-CF", + "action": "warning", + "description": "CF/GF: hard and brittle" + }, + { + "vendor": "Third Party", + "type": "PETG-CF", + "action": "warning", + "description": "CF/GF: hard and brittle" + }, + { + "vendor": "Third Party", + "type": "PA-CF", + "action": "warning", + "description": "CF/GF: hard and brittle" + }, + { + "vendor": "Third Party", + "type": "PAHT-CF", + "action": "warning", + "description": "CF/GF: hard and brittle" + }, + { + "vendor": "Bambulab", + "type": "PET-CF", + "action": "prohibition", + "description": "Bambu PET-CF/PA6-CF: not supported" + }, + { + "vendor": "Bambulab", + "type": "PA6-CF", + "action": "prohibition", + "description": "Bambu PET-CF/PA6-CF: not supported" + } + ] +} diff --git a/.config/OrcaSlicer/printers/version.txt b/.config/OrcaSlicer/printers/version.txt new file mode 100644 index 0000000..6b8ecb2 --- /dev/null +++ b/.config/OrcaSlicer/printers/version.txt @@ -0,0 +1 @@ +01.10.00.01 \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality.json b/.config/OrcaSlicer/system/Creality.json new file mode 100644 index 0000000..1deaf30 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality.json @@ -0,0 +1,1786 @@ +{ + "name": "Creality", + "version": "02.03.00.03", + "force_update": "0", + "description": "Creality configurations", + "machine_model_list": [ + { + "name": "Creality CR-10 V2", + "sub_path": "machine/Creality CR-10 V2.json" + }, + { + "name": "Creality CR-10 Max", + "sub_path": "machine/Creality CR-10 Max.json" + }, + { + "name": "Creality CR-10 SE", + "sub_path": "machine/Creality CR-10 SE.json" + }, + { + "name": "Creality CR-6 SE", + "sub_path": "machine/Creality CR-6 SE.json" + }, + { + "name": "Creality CR-6 Max", + "sub_path": "machine/Creality CR-6 Max.json" + }, + { + "name": "Creality CR-M4", + "sub_path": "machine/Creality CR-M4.json" + }, + { + "name": "Creality Ender-3 V2", + "sub_path": "machine/Creality Ender-3 V2.json" + }, + { + "name": "Creality Ender-3 V2 Neo", + "sub_path": "machine/Creality Ender-3 V2 Neo.json" + }, + { + "name": "Creality Ender-3 S1", + "sub_path": "machine/Creality Ender-3 S1.json" + }, + { + "name": "Creality Ender-3", + "sub_path": "machine/Creality Ender-3.json" + }, + { + "name": "Creality Ender-3 Pro", + "sub_path": "machine/Creality Ender-3 Pro.json" + }, + { + "name": "Creality Ender-3 S1 Pro", + "sub_path": "machine/Creality Ender-3 S1 Pro.json" + }, + { + "name": "Creality Ender-3 S1 Plus", + "sub_path": "machine/Creality Ender-3 S1 Plus.json" + }, + { + "name": "Creality Ender-3 V3 SE", + "sub_path": "machine/Creality Ender-3 V3 SE.json" + }, + { + "name": "Creality Ender-3 V3 KE", + "sub_path": "machine/Creality Ender-3 V3 KE.json" + }, + { + "name": "Creality Ender-3 V3", + "sub_path": "machine/Creality Ender-3 V3.json" + }, + { + "name": "Creality Ender-3 V3 Plus", + "sub_path": "machine/Creality Ender-3 V3 Plus.json" + }, + { + "name": "Creality Ender-5", + "sub_path": "machine/Creality Ender-5.json" + }, + { + "name": "Creality Ender-5 Max", + "sub_path": "machine/Creality Ender-5 Max.json" + }, + { + "name": "Creality Ender-5 Plus", + "sub_path": "machine/Creality Ender-5 Plus.json" + }, + { + "name": "Creality Ender-5 Pro (2019)", + "sub_path": "machine/Creality Ender-5 Pro (2019).json" + }, + { + "name": "Creality Ender-5S", + "sub_path": "machine/Creality Ender-5S.json" + }, + { + "name": "Creality Ender-5 S1", + "sub_path": "machine/Creality Ender-5 S1.json" + }, + { + "name": "Creality Ender-6", + "sub_path": "machine/Creality Ender-6.json" + }, + { + "name": "Creality Sermoon V1", + "sub_path": "machine/Creality Sermoon V1.json" + }, + { + "name": "Creality K1", + "sub_path": "machine/Creality K1.json" + }, + { + "name": "Creality K1C", + "sub_path": "machine/Creality K1C.json" + }, + { + "name": "Creality K1 Max", + "sub_path": "machine/Creality K1 Max.json" + }, + { + "name": "Creality K1 SE", + "sub_path": "machine/Creality K1 SE.json" + }, + { + "name": "Creality K2 Plus", + "sub_path": "machine/Creality K2 Plus.json" + }, + { + "name": "Creality Hi", + "sub_path": "machine/Creality Hi.json" + } + ], + "process_list": [ + { + "name": "fdm_process_common", + "sub_path": "process/fdm_process_common.json" + }, + { + "name": "fdm_process_creality_common", + "sub_path": "process/fdm_process_creality_common.json" + }, + { + "name": "fdm_process_common_klipper", + "sub_path": "process/fdm_process_common_klipper.json" + }, + { + "name": "fdm_process_creality_common_0_2", + "sub_path": "process/fdm_process_creality_common_0_2.json" + }, + { + "name": "fdm_process_creality_common_0_25", + "sub_path": "process/fdm_process_creality_common_0_25.json" + }, + { + "name": "fdm_process_creality_common_0_3", + "sub_path": "process/fdm_process_creality_common_0_3.json" + }, + { + "name": "fdm_process_creality_common_0_5", + "sub_path": "process/fdm_process_creality_common_0_5.json" + }, + { + "name": "fdm_process_creality_common_0_6", + "sub_path": "process/fdm_process_creality_common_0_6.json" + }, + { + "name": "fdm_process_creality_common_0_8", + "sub_path": "process/fdm_process_creality_common_0_8.json" + }, + { + "name": "fdm_process_creality_common_1_0", + "sub_path": "process/fdm_process_creality_common_1_0.json" + }, + { + "name": "0.12mm Fine @Creality Ender3 Pro 0.2", + "sub_path": "process/0.12mm Fine @Creality Ender3 Pro 0.2.json" + }, + { + "name": "0.12mm Fine @Creality Ender3 Pro 0.6", + "sub_path": "process/0.12mm Fine @Creality Ender3 Pro 0.6.json" + }, + { + "name": "0.12mm Fine @Creality Ender3 Pro 0.8", + "sub_path": "process/0.12mm Fine @Creality Ender3 Pro 0.8.json" + }, + { + "name": "0.12mm Fine @Creality Ender3 Pro 0.4", + "sub_path": "process/0.12mm Fine @Creality Ender3 Pro 0.4.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3 Pro 0.2", + "sub_path": "process/0.16mm Optimal @Creality Ender3 Pro 0.2.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3 Pro 0.4", + "sub_path": "process/0.16mm Optimal @Creality Ender3 Pro 0.4.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3 Pro 0.6", + "sub_path": "process/0.16mm Optimal @Creality Ender3 Pro 0.6.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3 Pro 0.8", + "sub_path": "process/0.16mm Optimal @Creality Ender3 Pro 0.8.json" + }, + { + "name": "0.20mm Standard @Creality Ender3 Pro 0.2", + "sub_path": "process/0.20mm Standard @Creality Ender3 Pro 0.2.json" + }, + { + "name": "0.20mm Standard @Creality Ender3 Pro 0.4", + "sub_path": "process/0.20mm Standard @Creality Ender3 Pro 0.4.json" + }, + { + "name": "0.20mm Standard @Creality Ender3 Pro 0.6", + "sub_path": "process/0.20mm Standard @Creality Ender3 Pro 0.6.json" + }, + { + "name": "0.20mm Standard @Creality Ender3 Pro 0.8", + "sub_path": "process/0.20mm Standard @Creality Ender3 Pro 0.8.json" + }, + { + "name": "0.24mm Draft @Creality Ender3 Pro 0.2", + "sub_path": "process/0.24mm Draft @Creality Ender3 Pro 0.2.json" + }, + { + "name": "0.24mm Draft @Creality Ender3 Pro 0.4", + "sub_path": "process/0.24mm Draft @Creality Ender3 Pro 0.4.json" + }, + { + "name": "0.24mm Draft @Creality Ender3 Pro 0.6", + "sub_path": "process/0.24mm Draft @Creality Ender3 Pro 0.6.json" + }, + { + "name": "0.24mm Draft @Creality Ender3 Pro 0.8", + "sub_path": "process/0.24mm Draft @Creality Ender3 Pro 0.8.json" + }, + { + "name": "0.28mm Draft @Creality Ender3 Pro 0.2", + "sub_path": "process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json" + }, + { + "name": "0.28mm Draft @Creality Ender3 Pro 0.4", + "sub_path": "process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json" + }, + { + "name": "0.28mm Draft @Creality Ender3 Pro 0.6", + "sub_path": "process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json" + }, + { + "name": "0.28mm Draft @Creality Ender3 Pro 0.8", + "sub_path": "process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json" + }, + { + "name": "0.08mm SuperDetail @Creality CR-6 0.2", + "sub_path": "process/0.08mm SuperDetail @Creality CR-6 0.2.json" + }, + { + "name": "0.08mm SuperDetail @Creality Ender5Pro (2019) 0.2", + "sub_path": "process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.2.json" + }, + { + "name": "0.08mm SuperDetail @Creality Ender5Pro (2019) 0.25", + "sub_path": "process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.25.json" + }, + { + "name": "0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3", + "sub_path": "process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3.json" + }, + { + "name": "0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle", + "sub_path": "process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json" + }, + { + "name": "0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle", + "sub_path": "process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json" + }, + { + "name": "0.08mm SuperDetail @Creality Hi", + "sub_path": "process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json" + }, + { + "name": "0.10mm HighDetail @Creality CR-6 0.4.json", + "sub_path": "process/0.10mm HighDetail @Creality CR-6 0.4.json" + }, + { + "name": "0.10mm HighDetail @Creality Ender5Pro (2019) 0.2", + "sub_path": "process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.2.json" + }, + { + "name": "0.10mm HighDetail @Creality Ender5Pro (2019) 0.25", + "sub_path": "process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.25.json" + }, + { + "name": "0.10mm HighDetail @Creality Ender5Pro (2019) 0.3", + "sub_path": "process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.3.json" + }, + { + "name": "0.10mm HighDetail @Creality CR-M4", + "sub_path": "process/0.10mm HighDetail @Creality CR-M4.json" + }, + { + "name": "0.10mm HighDetail @Creality K2 Plus 0.2 nozzle", + "sub_path": "process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json" + }, + { + "name": "0.12mm Detail @Creality Ender3 0.2", + "sub_path": "process/0.12mm Fine @Creality Ender3 0.2.json" + }, + { + "name": "0.12mm Detail @Creality Ender3 0.4", + "sub_path": "process/0.12mm Fine @Creality Ender3 0.4.json" + }, + { + "name": "0.12mm Detail @Creality Ender3 0.6", + "sub_path": "process/0.12mm Fine @Creality Ender3 0.6.json" + }, + { + "name": "0.12mm Detail @Creality Ender3 0.8", + "sub_path": "process/0.12mm Fine @Creality Ender3 0.8.json" + }, + { + "name": "0.12mm Fine @Creality CR10Max", + "sub_path": "process/0.12mm Fine @Creality CR10Max.json" + }, + { + "name": "0.12mm Fine @Creality CR10SE 0.2", + "sub_path": "process/0.12mm Fine @Creality CR10SE 0.2.json" + }, + { + "name": "0.12mm Fine @Creality CR10SE 0.4", + "sub_path": "process/0.12mm Fine @Creality CR10SE 0.4.json" + }, + { + "name": "0.12mm Fine @Creality CR10SE 0.6", + "sub_path": "process/0.12mm Fine @Creality CR10SE 0.6.json" + }, + { + "name": "0.12mm Fine @Creality CR10SE 0.8", + "sub_path": "process/0.12mm Fine @Creality CR10SE 0.8.json" + }, + { + "name": "0.12mm Detail @Creality CR-6 0.2", + "sub_path": "process/0.12mm Detail @Creality CR-6 0.2.json" + }, + { + "name": "0.12mm Detail @Creality CR-6 0.4", + "sub_path": "process/0.12mm Detail @Creality CR-6 0.4.json" + }, + { + "name": "0.12mm Fine @Creality Ender3V2", + "sub_path": "process/0.12mm Fine @Creality Ender3V2.json" + }, + { + "name": "0.12mm Fine @Creality Ender3V2Neo", + "sub_path": "process/0.12mm Fine @Creality Ender3V2Neo.json" + }, + { + "name": "0.12mm Fine @Creality Ender3V3KE", + "sub_path": "process/0.12mm Fine @Creality Ender3V3KE.json" + }, + { + "name": "0.12mm Fine @Creality Ender3V3SE 0.2", + "sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.2.json" + }, + { + "name": "0.12mm Fine @Creality Ender3V3SE 0.4", + "sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.4.json" + }, + { + "name": "0.12mm Fine @Creality Ender3V3SE 0.6", + "sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.6.json" + }, + { + "name": "0.12mm Fine @Creality Ender3V3SE 0.8", + "sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.8.json" + }, + { + "name": "0.12mm Fine @Creality Ender3V3", + "sub_path": "process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json" + }, + { + "name": "0.12mm Fine @Creality Ender3V3Plus", + "sub_path": "process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json" + }, + { + "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.2", + "sub_path": "process/0.12mm Detail @Creality Ender5Pro (2019) 0.2.json" + }, + { + "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.25", + "sub_path": "process/0.12mm Detail @Creality Ender5Pro (2019) 0.25.json" + }, + { + "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.3", + "sub_path": "process/0.12mm Detail @Creality Ender5Pro (2019) 0.3.json" + }, + { + "name": "0.12mm Fine @Creality Ender5Pro (2019)", + "sub_path": "process/0.12mm Fine @Creality Ender5Pro (2019).json" + }, + { + "name": "0.12mm Fine @Creality K1 (0.4 nozzle)", + "sub_path": "process/0.12mm Fine @Creality K1 (0.4 nozzle).json" + }, + { + "name": "0.12mm Fine @Creality K1 SE", + "sub_path": "process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json" + }, + { + "name": "0.12mm Fine @Creality K1C", + "sub_path": "process/0.12mm Fine @Creality K1C 0.4 nozzle.json" + }, + { + "name": "0.12mm Fine @Creality K1Max (0.4 nozzle)", + "sub_path": "process/0.12mm Fine @Creality K1Max (0.4 nozzle).json" + }, + { + "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.5", + "sub_path": "process/0.12mm Detail @Creality Ender5Pro (2019) 0.5.json" + }, + { + "name": "0.15mm Detail @Creality CR-M4", + "sub_path": "process/0.15mm Detail @Creality CR-M4.json" + }, + { + "name": "0.12mm Detail @Creality K2 Plus 0.2 nozzle", + "sub_path": "process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json" + }, + { + "name": "0.12mm Detail @Creality K2 Plus 0.4 nozzle", + "sub_path": "process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json" + }, + { + "name": "0.18mm Detail @Creality K2 Plus 0.6 nozzle", + "sub_path": "process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json" + }, + { + "name": "0.24mm Detail @Creality K2 Plus 0.8 nozzle", + "sub_path": "process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json" + }, + { + "name": "0.12mm Fine @Creality Hi", + "sub_path": "process/0.12mm Fine @Creality Hi 0.4 nozzle.json" + }, + { + "name": "0.16mm Optimal @Creality CR10V2", + "sub_path": "process/0.16mm Optimal @Creality CR10V2.json" + }, + { + "name": "0.15mm Optimal @Creality CR10Max", + "sub_path": "process/0.15mm Optimal @Creality CR10Max.json" + }, + { + "name": "0.16mm Optimal @Creality CR10SE 0.2", + "sub_path": "process/0.16mm Optimal @Creality CR10SE 0.2.json" + }, + { + "name": "0.16mm Optimal @Creality CR10SE 0.4", + "sub_path": "process/0.16mm Optimal @Creality CR10SE 0.4.json" + }, + { + "name": "0.16mm Optimal @Creality CR10SE 0.6", + "sub_path": "process/0.16mm Optimal @Creality CR10SE 0.6.json" + }, + { + "name": "0.16mm Optimal @Creality CR10SE 0.8", + "sub_path": "process/0.16mm Optimal @Creality CR10SE 0.8.json" + }, + { + "name": "0.16mm Optimal @Creality CR-6 0.2", + "sub_path": "process/0.16mm Optimal @Creality CR-6 0.2.json" + }, + { + "name": "0.16mm Optimal @Creality CR-6 0.4", + "sub_path": "process/0.16mm Optimal @Creality CR-6 0.4.json" + }, + { + "name": "0.16mm Optimal @Creality CR-6 0.6", + "sub_path": "process/0.16mm Optimal @Creality CR-6 0.6.json" + }, + { + "name": "0.15mm Optimal @Creality Ender3V2", + "sub_path": "process/0.15mm Optimal @Creality Ender3V2.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3V2Neo", + "sub_path": "process/0.16mm Optimal @Creality Ender3V2Neo.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3 0.2", + "sub_path": "process/0.16mm Optimal @Creality Ender3 0.2.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3 0.4", + "sub_path": "process/0.16mm Optimal @Creality Ender3 0.4.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3 0.6", + "sub_path": "process/0.16mm Optimal @Creality Ender3 0.6.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3 0.8", + "sub_path": "process/0.16mm Optimal @Creality Ender3 0.8.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3S1", + "sub_path": "process/0.16mm Optimal @Creality Ender3S1.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3S1Pro", + "sub_path": "process/0.16mm Optimal @Creality Ender3S1Pro.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3S1Plus 0.2", + "sub_path": "process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3S1Plus 0.4", + "sub_path": "process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3S1Plus 0.6", + "sub_path": "process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3S1Plus 0.8", + "sub_path": "process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3V3KE", + "sub_path": "process/0.16mm Optimal @Creality Ender3V3KE.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3V3SE 0.2", + "sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.2.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3V3SE 0.4", + "sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.4.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3V3SE 0.6", + "sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.6.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3V3SE 0.8", + "sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.8.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3V3", + "sub_path": "process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3V3Plus", + "sub_path": "process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json" + }, + { + "name": "0.16mm Optimal @Creality Ender5", + "sub_path": "process/0.16mm Optimal @Creality Ender5.json" + }, + { + "name": "0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle", + "sub_path": "process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json" + }, + { + "name": "0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle", + "sub_path": "process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json" + }, + { + "name": "0.16mm Optimal @Creality Ender5Plus", + "sub_path": "process/0.16mm Optimal @Creality Ender5Plus.json" + }, + { + "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.2", + "sub_path": "process/0.16mm Optimal @Creality Ender5Pro (2019) 0.2.json" + }, + { + "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.25", + "sub_path": "process/0.16mm Optimal @Creality Ender5Pro (2019) 0.25.json" + }, + { + "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.3", + "sub_path": "process/0.16mm Optimal @Creality Ender5Pro (2019) 0.3.json" + }, + { + "name": "0.15mm Optimal @Creality Ender5Pro (2019)", + "sub_path": "process/0.15mm Optimal @Creality Ender5Pro (2019).json" + }, + { + "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.5", + "sub_path": "process/0.16mm Optimal @Creality Ender5Pro (2019) 0.5.json" + }, + { + "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.6", + "sub_path": "process/0.16mm Optimal @Creality Ender5Pro (2019) 0.6.json" + }, + { + "name": "0.16mm Optimal @Creality Ender5S", + "sub_path": "process/0.16mm Optimal @Creality Ender5S.json" + }, + { + "name": "0.16mm Optimal @Creality Ender5S1", + "sub_path": "process/0.16mm Optimal @Creality Ender5S1.json" + }, + { + "name": "0.16mm Optimal @Creality Ender6", + "sub_path": "process/0.16mm Optimal @Creality Ender6.json" + }, + { + "name": "0.16mm Optimal @Creality K1 (0.4 nozzle)", + "sub_path": "process/0.16mm Optimal @Creality K1 (0.4 nozzle).json" + }, + { + "name": "0.16mm Optimal @Creality K1 SE", + "sub_path": "process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json" + }, + { + "name": "0.16mm Optimal @Creality K1C", + "sub_path": "process/0.16mm Optimal @Creality K1C 0.4 nozzle.json" + }, + { + "name": "0.16mm Optimal @Creality K1Max (0.4 nozzle)", + "sub_path": "process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json" + }, + { + "name": "0.14mm Optimal @Creality K2 Plus 0.2 nozzle", + "sub_path": "process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json" + }, + { + "name": "0.16mm Optimal @Creality K2 Plus 0.4 nozzle", + "sub_path": "process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json" + }, + { + "name": "0.16mm Optimal @Creality Hi", + "sub_path": "process/0.16mm Optimal @Creality Hi 0.4 nozzle.json" + }, + { + "name": "0.24mm Optimal @Creality K2 Plus 0.6 nozzle", + "sub_path": "process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json" + }, + { + "name": "0.32mm Optimal @Creality K2 Plus 0.8 nozzle", + "sub_path": "process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json" + }, + { + "name": "0.20mm Standard @Creality CR10V2", + "sub_path": "process/0.20mm Standard @Creality CR10V2.json" + }, + { + "name": "0.20mm Standard @Creality CR10Max", + "sub_path": "process/0.20mm Standard @Creality CR10Max.json" + }, + { + "name": "0.20mm Standard @Creality CR10SE 0.2", + "sub_path": "process/0.20mm Standard @Creality CR10SE 0.2.json" + }, + { + "name": "0.20mm Standard @Creality CR10SE 0.4", + "sub_path": "process/0.20mm Standard @Creality CR10SE 0.4.json" + }, + { + "name": "0.20mm Standard @Creality CR10SE 0.6", + "sub_path": "process/0.20mm Standard @Creality CR10SE 0.6.json" + }, + { + "name": "0.20mm Standard @Creality CR10SE 0.8", + "sub_path": "process/0.20mm Standard @Creality CR10SE 0.8.json" + }, + { + "name": "0.20mm Standard @Creality CR-6 0.4", + "sub_path": "process/0.20mm Standard @Creality CR-6 0.4.json" + }, + { + "name": "0.20mm Standard @Creality CR-6 0.6", + "sub_path": "process/0.20mm Standard @Creality CR-6 0.6.json" + }, + { + "name": "0.20mm Standard @Creality Ender3", + "sub_path": "process/0.20mm Standard @Creality Ender3.json" + }, + { + "name": "0.20mm Standard @Creality Ender3 0.2", + "sub_path": "process/0.20mm Standard @Creality Ender3 0.2.json" + }, + { + "name": "0.20mm Standard @Creality Ender3 0.4", + "sub_path": "process/0.20mm Standard @Creality Ender3 0.4.json" + }, + { + "name": "0.20mm Standard @Creality Ender3 0.6", + "sub_path": "process/0.20mm Standard @Creality Ender3 0.6.json" + }, + { + "name": "0.20mm Standard @Creality Ender3 0.8", + "sub_path": "process/0.20mm Standard @Creality Ender3 0.8.json" + }, + { + "name": "0.20mm Standard @Creality Ender3V2", + "sub_path": "process/0.20mm Standard @Creality Ender3V2.json" + }, + { + "name": "0.20mm Standard @Creality Ender3V2Neo", + "sub_path": "process/0.20mm Standard @Creality Ender3V2Neo.json" + }, + { + "name": "0.20mm Standard @Creality Ender3S1", + "sub_path": "process/0.20mm Standard @Creality Ender3S1.json" + }, + { + "name": "0.20mm Standard @Creality Ender3S1Pro", + "sub_path": "process/0.20mm Standard @Creality Ender3S1Pro.json" + }, + { + "name": "0.20mm Standard @Creality Ender3S1Plus 0.2", + "sub_path": "process/0.20mm Standard @Creality Ender3S1Plus 0.2.json" + }, + { + "name": "0.20mm Standard @Creality Ender3S1Plus 0.4", + "sub_path": "process/0.20mm Standard @Creality Ender3S1Plus 0.4.json" + }, + { + "name": "0.20mm Standard @Creality Ender3S1Plus 0.6", + "sub_path": "process/0.20mm Standard @Creality Ender3S1Plus 0.6.json" + }, + { + "name": "0.20mm Standard @Creality Ender3S1Plus 0.8", + "sub_path": "process/0.20mm Standard @Creality Ender3S1Plus 0.8.json" + }, + { + "name": "0.20mm Standard @Creality Ender3V3KE", + "sub_path": "process/0.20mm Standard @Creality Ender3V3KE.json" + }, + { + "name": "0.20mm Standard @Creality Ender3V3SE 0.2", + "sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.2.json" + }, + { + "name": "0.20mm Standard @Creality Ender3V3SE 0.4", + "sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.4.json" + }, + { + "name": "0.20mm Standard @Creality Ender3V3SE 0.6", + "sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.6.json" + }, + { + "name": "0.20mm Standard @Creality Ender3V3SE 0.8", + "sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.8.json" + }, + { + "name": "0.20mm Standard @Creality Ender3V3", + "sub_path": "process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json" + }, + { + "name": "0.20mm Standard @Creality Ender3V3Plus", + "sub_path": "process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json" + }, + { + "name": "0.20mm Standard @Creality Ender5", + "sub_path": "process/0.20mm Standard @Creality Ender5.json" + }, + { + "name": "0.20mm Standard @Creality Ender5Plus", + "sub_path": "process/0.20mm Standard @Creality Ender5Plus.json" + }, + { + "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.25", + "sub_path": "process/0.20mm Standard @Creality Ender5Pro (2019) 0.25.json" + }, + { + "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.3", + "sub_path": "process/0.20mm Standard @Creality Ender5Pro (2019) 0.3.json" + }, + { + "name": "0.20mm Standard @Creality Ender5Pro (2019)", + "sub_path": "process/0.20mm Standard @Creality Ender5Pro (2019).json" + }, + { + "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.5", + "sub_path": "process/0.20mm Standard @Creality Ender5Pro (2019) 0.5.json" + }, + { + "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.6", + "sub_path": "process/0.20mm Standard @Creality Ender5Pro (2019) 0.6.json" + }, + { + "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.8", + "sub_path": "process/0.20mm Standard @Creality Ender5Pro (2019) 0.8.json" + }, + { + "name": "0.20mm Standard @Creality Ender5S", + "sub_path": "process/0.20mm Standard @Creality Ender5S.json" + }, + { + "name": "0.20mm Standard @Creality Ender5S1", + "sub_path": "process/0.20mm Standard @Creality Ender5S1.json" + }, + { + "name": "0.20mm Standard @Creality Ender6", + "sub_path": "process/0.20mm Standard @Creality Ender6.json" + }, + { + "name": "0.20mm Standard @Creality CR-M4", + "sub_path": "process/0.20mm Standard @Creality CR-M4.json" + }, + { + "name": "0.20mm Standard @Creality K1 (0.4 nozzle)", + "sub_path": "process/0.20mm Standard @Creality K1 (0.4 nozzle).json" + }, + { + "name": "0.20mm Standard @Creality K1C", + "sub_path": "process/0.20mm Standard @Creality K1C 0.4 nozzle.json" + }, + { + "name": "0.20mm Standard @Creality K1Max (0.4 nozzle)", + "sub_path": "process/0.20mm Standard @Creality K1Max (0.4 nozzle).json" + }, + { + "name": "0.20mm Standard @Creality K2 Plus 0.4 nozzle", + "sub_path": "process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json" + }, + { + "name": "0.30mm Standard @Creality K2 Plus 0.6 nozzle", + "sub_path": "process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json" + }, + { + "name": "0.40mm Standard @Creality K2 Plus 0.8 nozzle", + "sub_path": "process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json" + }, + { + "name": "0.20mm Standard @Creality K1 SE 0.4", + "sub_path": "process/0.20mm Standard @Creality K1 SE 0.4.json" + }, + { + "name": "0.20mm Standard @Creality Hi", + "sub_path": "process/0.20mm Standard @Creality Hi 0.4 nozzle.json" + }, + { + "name": "0.24mm Draft @Creality Ender3 0.2", + "sub_path": "process/0.24mm Draft @Creality Ender3 0.2.json" + }, + { + "name": "0.24mm Draft @Creality Ender3 0.4", + "sub_path": "process/0.24mm Draft @Creality Ender3 0.4.json" + }, + { + "name": "0.24mm Draft @Creality Ender3 0.6", + "sub_path": "process/0.24mm Draft @Creality Ender3 0.6.json" + }, + { + "name": "0.24mm Draft @Creality Ender3 0.8", + "sub_path": "process/0.24mm Draft @Creality Ender3 0.8.json" + }, + { + "name": "0.24mm Draft @Creality CR10Max", + "sub_path": "process/0.24mm Draft @Creality CR10Max.json" + }, + { + "name": "0.24mm Draft @Creality CR10SE 0.2", + "sub_path": "process/0.24mm Draft @Creality CR10SE 0.2.json" + }, + { + "name": "0.24mm Draft @Creality CR10SE 0.4", + "sub_path": "process/0.24mm Draft @Creality CR10SE 0.4.json" + }, + { + "name": "0.24mm Draft @Creality CR10SE 0.6", + "sub_path": "process/0.24mm Draft @Creality CR10SE 0.6.json" + }, + { + "name": "0.24mm Draft @Creality CR10SE 0.8", + "sub_path": "process/0.24mm Draft @Creality CR10SE 0.8.json" + }, + { + "name": "0.24mm Draft @Creality CR-6 0.4", + "sub_path": "process/0.24mm Draft @Creality CR-6 0.4.json" + }, + { + "name": "0.24mm Draft @Creality CR-6 0.6", + "sub_path": "process/0.24mm Draft @Creality CR-6 0.6.json" + }, + { + "name": "0.24mm Optimal @Creality CR-6 0.8", + "sub_path": "process/0.24mm Optimal @Creality CR-6 0.8.json" + }, + { + "name": "0.24mm Draft @Creality Ender3V2", + "sub_path": "process/0.24mm Draft @Creality Ender3V2.json" + }, + { + "name": "0.24mm Draft @Creality Ender3V2Neo", + "sub_path": "process/0.24mm Draft @Creality Ender3V2Neo.json" + }, + { + "name": "0.24mm Draft @Creality Ender3V3KE", + "sub_path": "process/0.24mm Draft @Creality Ender3V3KE.json" + }, + { + "name": "0.24mm Draft @Creality Ender3V3SE 0.2", + "sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.2.json" + }, + { + "name": "0.24mm Draft @Creality Ender3V3SE 0.4", + "sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.4.json" + }, + { + "name": "0.24mm Draft @Creality Ender3V3SE 0.6", + "sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.6.json" + }, + { + "name": "0.24mm Draft @Creality Ender3V3SE 0.8", + "sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.8.json" + }, + { + "name": "0.24mm Draft @Creality Ender3V3", + "sub_path": "process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json" + }, + { + "name": "0.24mm Draft @Creality Ender3V3", + "sub_path": "process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json" + }, + { + "name": "0.24mm Draft @Creality Ender3V3Plus", + "sub_path": "process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json" + }, + { + "name": "0.24mm Optimal @Creality Ender3V3Plus", + "sub_path": "process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json" + }, + { + "name": "0.24mm Draft @Creality Ender3S1Plus 0.2", + "sub_path": "process/0.24mm Draft @Creality Ender3S1Plus 0.2.json" + }, + { + "name": "0.24mm Draft @Creality Ender3S1Plus 0.4", + "sub_path": "process/0.24mm Draft @Creality Ender3S1Plus 0.4.json" + }, + { + "name": "0.24mm Draft @Creality Ender3S1Plus 0.6", + "sub_path": "process/0.24mm Draft @Creality Ender3S1Plus 0.6.json" + }, + { + "name": "0.24mm Draft @Creality Ender3S1Plus 0.8", + "sub_path": "process/0.24mm Draft @Creality Ender3S1Plus 0.8.json" + }, + { + "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.3", + "sub_path": "process/0.24mm Draft @Creality Ender5Pro (2019) 0.3.json" + }, + { + "name": "0.24mm Draft @Creality Ender5Pro (2019)", + "sub_path": "process/0.24mm Draft @Creality Ender5Pro (2019).json" + }, + { + "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.5", + "sub_path": "process/0.24mm Draft @Creality Ender5Pro (2019) 0.5.json" + }, + { + "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.6", + "sub_path": "process/0.24mm Draft @Creality Ender5Pro (2019) 0.6.json" + }, + { + "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.8", + "sub_path": "process/0.24mm Draft @Creality Ender5Pro (2019) 0.8.json" + }, + { + "name": "0.24mm Draft @Creality K2 Plus 0.4 nozzle", + "sub_path": "process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json" + }, + { + "name": "0.24mm Draft @Creality Hi", + "sub_path": "process/0.24mm Draft @Creality Hi 0.4 nozzle.json" + }, + { + "name": "0.24mm Optimal @Creality Hi", + "sub_path": "process/0.24mm Optimal @Creality Hi 0.6 nozzle.json" + }, + { + "name": "0.36mm Draft @Creality K2 Plus 0.6 nozzle", + "sub_path": "process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json" + }, + { + "name": "0.48mm Draft @Creality K2 Plus 0.8 nozzle", + "sub_path": "process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json" + }, + { + "name": "0.28mm SuperDraft @Creality Ender3 0.2", + "sub_path": "process/0.28mm SuperDraft @Creality Ender3 0.2.json" + }, + { + "name": "0.28mm SuperDraft @Creality Ender3 0.4", + "sub_path": "process/0.28mm SuperDraft @Creality Ender3 0.4.json" + }, + { + "name": "0.28mm SuperDraft @Creality Ender3 0.6", + "sub_path": "process/0.28mm SuperDraft @Creality Ender3 0.6.json" + }, + { + "name": "0.28mm SuperDraft @Creality Ender3 0.8", + "sub_path": "process/0.28mm SuperDraft @Creality Ender3 0.8.json" + }, + { + "name": "0.30mm Standard @Creality Ender3V3", + "sub_path": "process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json" + }, + { + "name": "0.36mm Draft @Creality Ender3V3", + "sub_path": "process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json" + }, + { + "name": "0.30mm Standard @Creality Ender3V3Plus", + "sub_path": "process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json" + }, + { + "name": "0.36mm Draft @Creality Ender3V3Plus", + "sub_path": "process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json" + }, + { + "name": "0.28mm SuperDraft @Creality CR-6 0.4", + "sub_path": "process/0.28mm SuperDraft @Creality CR-6 0.4.json" + }, + { + "name": "0.28mm SuperDraft @Creality CR-6 0.6", + "sub_path": "process/0.28mm SuperDraft @Creality CR-6 0.6.json" + }, + { + "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 0.5", + "sub_path": "process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.5.json" + }, + { + "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 0.6", + "sub_path": "process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.6.json" + }, + { + "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 0.8", + "sub_path": "process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.8.json" + }, + { + "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0", + "sub_path": "process/0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0.json" + }, + { + "name": "0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle", + "sub_path": "process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json" + }, + { + "name": "0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle", + "sub_path": "process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json" + }, + { + "name": "0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle", + "sub_path": "process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json" + }, + { + "name": "0.32mm Chunky @Creality CR-6 0.6", + "sub_path": "process/0.32mm Chunky @Creality CR-6 0.6.json" + }, + { + "name": "0.32mm Standard @Creality CR-6 0.8", + "sub_path": "process/0.32mm Standard @Creality CR-6 0.8.json" + }, + { + "name": "0.36mm SuperChunky @Creality CR-6 0.6", + "sub_path": "process/0.36mm SuperChunky @Creality CR-6 0.6.json" + }, + { + "name": "0.36mm Chunky @Creality Ender5Pro (2019) 0.5", + "sub_path": "process/0.36mm Chunky @Creality Ender5Pro (2019) 0.5.json" + }, + { + "name": "0.36mm Chunky @Creality Ender5Pro (2019) 0.6", + "sub_path": "process/0.36mm Chunky @Creality Ender5Pro (2019) 0.6.json" + }, + { + "name": "0.36mm Chunky @Creality Ender5Pro (2019) 0.8", + "sub_path": "process/0.36mm Chunky @Creality Ender5Pro (2019) 0.8.json" + }, + { + "name": "0.36mm Chunky @Creality Ender5Pro (2019) 1.0", + "sub_path": "process/0.36mm Chunky @Creality Ender5Pro (2019) 1.0.json" + }, + { + "name": "0.40mm Draft @Creality CR-6 0.8", + "sub_path": "process/0.40mm Draft @Creality CR-6 0.8.json" + }, + { + "name": "0.44mm SuperExtraChunky @Creality CR-6 0.6", + "sub_path": "process/0.44mm SuperExtraChunky @Creality CR-6 0.6.json" + }, + { + "name": "0.48mm Chunky @Creality CR-6 0.8", + "sub_path": "process/0.48mm Chunky @Creality CR-6 0.8.json" + }, + { + "name": "0.48mm Draft @Creality CR-6 0.8", + "sub_path": "process/0.48mm Draft @Creality CR-6 0.8.json" + }, + { + "name": "0.56mm SuperChunky @Creality CR-6 0.8", + "sub_path": "process/0.56mm SuperChunky @Creality CR-6 0.8.json" + }, + { + "name": "0.16mm Optimal @Creality Sermoon V1", + "sub_path": "process/0.16mm Optimal @Creality Sermoon V1.json" + }, + { + "name": "0.20mm Standard @Creality Sermoon V1", + "sub_path": "process/0.20mm Standard @Creality Sermoon V1.json" + }, + { + "name": "0.28mm Standard @Creality Sermoon V1", + "sub_path": "process/0.28mm Standard @Creality Sermoon V1.json" + }, + { + "name": "0.24mm Optimal @Creality K1 (0.6 nozzle)", + "sub_path": "process/0.24mm Optimal @Creality K1 (0.6 nozzle).json" + }, + { + "name": "0.24mm Optimal @Creality K1C", + "sub_path": "process/0.24mm Optimal @Creality K1C 0.6 nozzle.json" + }, + { + "name": "0.24mm Optimal @Creality K1Max (0.6 nozzle)", + "sub_path": "process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json" + }, + { + "name": "0.24mm Draft @Creality K1 (0.4 nozzle)", + "sub_path": "process/0.24mm Draft @Creality K1 (0.4 nozzle).json" + }, + { + "name": "0.24mm Draft @Creality K1 SE", + "sub_path": "process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json" + }, + { + "name": "0.24mm Draft @Creality K1C", + "sub_path": "process/0.24mm Draft @Creality K1C 0.4 nozzle.json" + }, + { + "name": "0.24mm Draft @Creality K1Max (0.4 nozzle)", + "sub_path": "process/0.24mm Draft @Creality K1Max (0.4 nozzle).json" + }, + { + "name": "0.30mm Standard @Creality K1 (0.6 nozzle)", + "sub_path": "process/0.30mm Standard @Creality K1 (0.6 nozzle).json" + }, + { + "name": "0.30mm Standard @Creality K1C", + "sub_path": "process/0.30mm Standard @Creality K1C 0.6 nozzle.json" + }, + { + "name": "0.30mm Standard @Creality Hi", + "sub_path": "process/0.30mm Standard @Creality Hi 0.6 nozzle.json" + }, + { + "name": "0.30mm Standard @Creality K1Max (0.6 nozzle)", + "sub_path": "process/0.30mm Standard @Creality K1Max (0.6 nozzle).json" + }, + { + "name": "0.32mm Optimal @Creality K1 (0.8 nozzle)", + "sub_path": "process/0.32mm Optimal @Creality K1 (0.8 nozzle).json" + }, + { + "name": "0.32mm Optimal @Creality K1C", + "sub_path": "process/0.32mm Optimal @Creality K1C 0.8 nozzle.json" + }, + { + "name": "0.32mm Optimal @Creality K1Max (0.8 nozzle)", + "sub_path": "process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json" + }, + { + "name": "0.36mm Draft @Creality K1 (0.6 nozzle)", + "sub_path": "process/0.36mm Draft @Creality K1 (0.6 nozzle).json" + }, + { + "name": "0.36mm Draft @Creality K1C", + "sub_path": "process/0.36mm Draft @Creality K1C 0.6 nozzle.json" + }, + { + "name": "0.36mm Draft @Creality Hi", + "sub_path": "process/0.36mm Draft @Creality Hi 0.6 nozzle.json" + }, + { + "name": "0.36mm Draft @Creality K1Max (0.6 nozzle)", + "sub_path": "process/0.36mm Draft @Creality K1Max (0.6 nozzle).json" + }, + { + "name": "0.40mm Standard @Creality K1 (0.8 nozzle)", + "sub_path": "process/0.40mm Standard @Creality K1 (0.8 nozzle).json" + }, + { + "name": "0.40mm Standard @Creality K1C", + "sub_path": "process/0.40mm Standard @Creality K1C 0.8 nozzle.json" + }, + { + "name": "0.40mm Standard @Creality K1Max (0.8 nozzle)", + "sub_path": "process/0.40mm Standard @Creality K1Max (0.8 nozzle).json" + }, + { + "name": "0.48mm Draft @Creality K1 (0.8 nozzle)", + "sub_path": "process/0.48mm Draft @Creality K1 (0.8 nozzle).json" + }, + { + "name": "0.48mm Draft @Creality K1C", + "sub_path": "process/0.48mm Draft @Creality K1C 0.8 nozzle.json" + }, + { + "name": "0.48mm Draft @Creality K1Max (0.8 nozzle)", + "sub_path": "process/0.48mm Draft @Creality K1Max (0.8 nozzle).json" + } + ], + "filament_list": [ + { + "name": "fdm_filament_common", + "sub_path": "filament/fdm_filament_common.json" + }, + { + "name": "fdm_filament_abs", + "sub_path": "filament/fdm_filament_abs.json" + }, + { + "name": "fdm_filament_asa", + "sub_path": "filament/fdm_filament_asa.json" + }, + { + "name": "fdm_filament_pa", + "sub_path": "filament/fdm_filament_pa.json" + }, + { + "name": "fdm_filament_pc", + "sub_path": "filament/fdm_filament_pc.json" + }, + { + "name": "fdm_filament_pet", + "sub_path": "filament/fdm_filament_pet.json" + }, + { + "name": "fdm_filament_pla", + "sub_path": "filament/fdm_filament_pla.json" + }, + { + "name": "fdm_filament_tpu", + "sub_path": "filament/fdm_filament_tpu.json" + }, + { + "name": "Creality Generic ABS", + "sub_path": "filament/Creality Generic ABS.json" + }, + { + "name": "Creality Generic ASA", + "sub_path": "filament/Creality Generic ASA.json" + }, + { + "name": "Creality Generic PA-CF", + "sub_path": "filament/Creality Generic PA-CF.json" + }, + { + "name": "Creality Generic PC", + "sub_path": "filament/Creality Generic PC.json" + }, + { + "name": "Creality Generic PETG", + "sub_path": "filament/Creality Generic PETG.json" + }, + { + "name": "Creality Generic PLA", + "sub_path": "filament/Creality Generic PLA.json" + }, + { + "name": "Creality HF Generic PLA", + "sub_path": "filament/Creality HF Generic PLA.json" + }, + { + "name": "Creality HF Generic Speed PLA", + "sub_path": "filament/Creality HF Generic Speed PLA.json" + }, + { + "name": "Creality Generic PLA-CF", + "sub_path": "filament/Creality Generic PLA-CF.json" + }, + { + "name": "Creality Generic TPU", + "sub_path": "filament/Creality Generic TPU.json" + }, + { + "name": "Creality Generic ABS @Ender-3V3-all", + "sub_path": "filament/Creality Generic ABS @Ender-3V3-all.json" + }, + { + "name": "Creality Generic ASA @Ender-3V3-all", + "sub_path": "filament/Creality Generic ASA @Ender-3V3-all.json" + }, + { + "name": "Creality Generic PA-CF @Ender-3V3-all", + "sub_path": "filament/Creality Generic PA-CF @Ender-3V3-all.json" + }, + { + "name": "Creality Generic PETG @Ender-3V3-all", + "sub_path": "filament/Creality Generic PETG @Ender-3V3-all.json" + }, + { + "name": "Creality Generic PLA @Ender-3V3-all", + "sub_path": "filament/Creality Generic PLA @Ender-3V3-all.json" + }, + { + "name": "Creality Generic PLA High Speed @Ender-3V3-all", + "sub_path": "filament/Creality Generic PLA High Speed @Ender-3V3-all.json" + }, + { + "name": "Creality Generic PLA Matte @Ender-3V3-all", + "sub_path": "filament/Creality Generic PLA Matte @Ender-3V3-all.json" + }, + { + "name": "Creality Generic PLA Silk @Ender-3V3-all", + "sub_path": "filament/Creality Generic PLA Silk @Ender-3V3-all.json" + }, + { + "name": "Creality Generic TPU @Ender-3V3-all", + "sub_path": "filament/Creality Generic TPU @Ender-3V3-all.json" + }, + { + "name": "Creality Generic ABS @K1-all", + "sub_path": "filament/Creality Generic ABS @K1-all.json" + }, + { + "name": "Creality Generic ASA @K1-all", + "sub_path": "filament/Creality Generic ASA @K1-all.json" + }, + { + "name": "Creality Generic PA-CF @K1-all", + "sub_path": "filament/Creality Generic PA-CF @K1-all.json" + }, + { + "name": "Creality Generic PC @K1-all", + "sub_path": "filament/Creality Generic PC @K1-all.json" + }, + { + "name": "Creality Generic PETG @K1-all", + "sub_path": "filament/Creality Generic PETG @K1-all.json" + }, + { + "name": "Creality Generic PLA @K1-all", + "sub_path": "filament/Creality Generic PLA @K1-all.json" + }, + { + "name": "Creality Generic PLA High Speed @K1-all", + "sub_path": "filament/Creality Generic PLA High Speed @K1-all.json" + }, + { + "name": "Creality Generic PLA Matte @K1-all", + "sub_path": "filament/Creality Generic PLA Matte @K1-all.json" + }, + { + "name": "Creality Generic PLA Silk @K1-all", + "sub_path": "filament/Creality Generic PLA Silk @K1-all.json" + }, + { + "name": "Creality Generic PLA-CF @K1-all", + "sub_path": "filament/Creality Generic PLA-CF @K1-all.json" + }, + { + "name": "Creality Generic TPU @K1-all", + "sub_path": "filament/Creality Generic TPU @K1-all.json" + }, + { + "name": "Creality Generic ABS @K2-all", + "sub_path": "filament/Creality Generic ABS @K2-all.json" + }, + { + "name": "Creality Generic ASA @K2-all", + "sub_path": "filament/Creality Generic ASA @K2-all.json" + }, + { + "name": "Creality Generic PETG @K2-all", + "sub_path": "filament/Creality Generic PETG @K2-all.json" + }, + { + "name": "Creality Generic PLA @K2-all", + "sub_path": "filament/Creality Generic PLA @K2-all.json" + }, + { + "name": "Creality Generic PLA High Speed @K2-all", + "sub_path": "filament/Creality Generic PLA High Speed @K2-all.json" + }, + { + "name": "Creality Generic PLA Matte @K2-all", + "sub_path": "filament/Creality Generic PLA Matte @K2-all.json" + }, + { + "name": "Creality Generic PLA Silk @K2-all", + "sub_path": "filament/Creality Generic PLA Silk @K2-all.json" + }, + { + "name": "Creality Generic TPU @K2-all", + "sub_path": "filament/Creality Generic TPU @K2-all.json" + }, + { + "name": "Creality Generic PLA-CF @K2-all", + "sub_path": "filament/Creality Generic PLA-CF @K2-all.json" + }, + { + "name": "Creality Generic PA-CF @K2-all", + "sub_path": "filament/Creality Generic PA-CF @K2-all.json" + }, + { + "name": "Creality Generic ABS @Hi-all", + "sub_path": "filament/Creality Generic ABS @Hi-all.json" + }, + { + "name": "Creality Generic ASA @Hi-all", + "sub_path": "filament/Creality Generic ASA @Hi-all.json" + }, + { + "name": "Creality Generic ABS @Ender-5Max-all", + "sub_path": "filament/Creality Generic ABS @Ender-5Max-all.json" + }, + { + "name": "Creality Generic ASA @Ender-5Max-all", + "sub_path": "filament/Creality Generic ASA @Ender-5Max-all.json" + }, + { + "name": "Creality Generic PA @Ender-5Max-all", + "sub_path": "filament/Creality Generic PA @Ender-5Max-all.json" + }, + { + "name": "Creality Generic PETG @Ender-5Max-all", + "sub_path": "filament/Creality Generic PETG @Ender-5Max-all.json" + }, + { + "name": "Creality Generic PLA @Ender-5Max-all", + "sub_path": "filament/Creality Generic PLA @Ender-5Max-all.json" + }, + { + "name": "Creality Generic TPU @Ender-5Max-all", + "sub_path": "filament/Creality Generic TPU @Ender-5Max-all.json" + }, + { + "name": "Creality Hyper ABS @Ender-5Max-all", + "sub_path": "filament/Creality Hyper ABS @Ender-5Max-all.json" + }, + { + "name": "Creality Hyper PLA @Ender-5Max-all", + "sub_path": "filament/Creality Hyper PLA @Ender-5Max-all.json" + }, + { + "name": "Creality Hyper PLA-CF @Ender-5Max-all", + "sub_path": "filament/Creality Hyper PLA-CF @Ender-5Max-all.json" + }, + { + "name": "Creality Silk PLA @Ender-5Max-all", + "sub_path": "filament/Creality Silk PLA @Ender-5Max-all.json" + }, + { + "name": "Creality Generic ASA-CF @Hi-all", + "sub_path": "filament/Creality Generic ASA-CF @Hi-all.json" + }, + { + "name": "Creality Generic PETG @Hi-all", + "sub_path": "filament/Creality Generic PETG @Hi-all.json" + }, + { + "name": "Creality Generic PETG-CF @Hi-all", + "sub_path": "filament/Creality Generic PETG-CF @Hi-all.json" + }, + { + "name": "Creality Generic PLA @Hi-all", + "sub_path": "filament/Creality Generic PLA @Hi-all.json" + }, + { + "name": "Creality Generic PLA High Speed @Hi-all", + "sub_path": "filament/Creality Generic PLA High Speed @Hi-all.json" + }, + { + "name": "Creality Generic PLA Matte @Hi-all", + "sub_path": "filament/Creality Generic PLA Matte @Hi-all.json" + }, + { + "name": "Creality Generic PLA Silk @Hi-all", + "sub_path": "filament/Creality Generic PLA Silk @Hi-all.json" + }, + { + "name": "Creality Generic PLA-CF @Hi-all", + "sub_path": "filament/Creality Generic PLA-CF @Hi-all.json" + }, + { + "name": "Creality Generic PLA Wood @Hi-all", + "sub_path": "filament/Creality Generic PLA Wood @Hi-all.json" + }, + { + "name": "Creality Generic TPU @Hi-all", + "sub_path": "filament/Creality Generic TPU @Hi-all.json" + } + ], + "machine_list": [ + { + "name": "fdm_machine_common", + "sub_path": "machine/fdm_machine_common.json" + }, + { + "name": "fdm_creality_common", + "sub_path": "machine/fdm_creality_common.json" + }, + { + "name": "Creality CR-10 V2 0.4 nozzle", + "sub_path": "machine/Creality CR-10 V2 0.4 nozzle.json" + }, + { + "name": "Creality CR-10 Max 0.4 nozzle", + "sub_path": "machine/Creality CR-10 Max 0.4 nozzle.json" + }, + { + "name": "Creality CR-10 SE 0.2 nozzle", + "sub_path": "machine/Creality CR-10 SE 0.2 nozzle.json" + }, + { + "name": "Creality CR-10 SE 0.4 nozzle", + "sub_path": "machine/Creality CR-10 SE 0.4 nozzle.json" + }, + { + "name": "Creality CR-10 SE 0.6 nozzle", + "sub_path": "machine/Creality CR-10 SE 0.6 nozzle.json" + }, + { + "name": "Creality CR-10 SE 0.8 nozzle", + "sub_path": "machine/Creality CR-10 SE 0.8 nozzle.json" + }, + { + "name": "Creality Ender-6 0.4 nozzle", + "sub_path": "machine/Creality Ender-6 0.4 nozzle.json" + }, + { + "name": "Creality CR-6 SE 0.2 nozzle", + "sub_path": "machine/Creality CR-6 SE 0.2 nozzle.json" + }, + { + "name": "Creality CR-6 SE 0.4 nozzle", + "sub_path": "machine/Creality CR-6 SE 0.4 nozzle.json" + }, + { + "name": "Creality CR-6 SE 0.6 nozzle", + "sub_path": "machine/Creality CR-6 SE 0.6 nozzle.json" + }, + { + "name": "Creality CR-6 SE 0.8 nozzle", + "sub_path": "machine/Creality CR-6 SE 0.8 nozzle.json" + }, + { + "name": "Creality CR-6 Max 0.2 nozzle", + "sub_path": "machine/Creality CR-6 Max 0.2 nozzle.json" + }, + { + "name": "Creality CR-6 Max 0.4 nozzle", + "sub_path": "machine/Creality CR-6 Max 0.4 nozzle.json" + }, + { + "name": "Creality CR-6 Max 0.6 nozzle", + "sub_path": "machine/Creality CR-6 Max 0.6 nozzle.json" + }, + { + "name": "Creality CR-6 Max 0.8 nozzle", + "sub_path": "machine/Creality CR-6 Max 0.8 nozzle.json" + }, + { + "name": "Creality CR-M4 0.4 nozzle", + "sub_path": "machine/Creality CR-M4 0.4 nozzle.json" + }, + { + "name": "Creality Ender-3 V2 0.4 nozzle", + "sub_path": "machine/Creality Ender-3 V2 0.4 nozzle.json" + }, + { + "name": "Creality Ender-3 0.2 nozzle", + "sub_path": "machine/Creality Ender-3 0.2 nozzle.json" + }, + { + "name": "Creality Ender-3 V2 Neo 0.4 nozzle", + "sub_path": "machine/Creality Ender-3 V2 Neo 0.4 nozzle.json" + }, + { + "name": "Creality Ender-3 0.4 nozzle", + "sub_path": "machine/Creality Ender-3 0.4 nozzle.json" + }, + { + "name": "Creality Ender-3 0.6 nozzle", + "sub_path": "machine/Creality Ender-3 0.6 nozzle.json" + }, + { + "name": "Creality Ender-3 0.8 nozzle", + "sub_path": "machine/Creality Ender-3 0.8 nozzle.json" + }, + { + "name": "Creality Ender-3 Pro 0.4 nozzle", + "sub_path": "machine/Creality Ender-3 Pro 0.4 nozzle.json" + }, + { + "name": "Creality Ender-3 Pro 0.2 nozzle", + "sub_path": "machine/Creality Ender-3 Pro 0.2 nozzle.json" + }, + { + "name": "Creality Ender-3 Pro 0.6 nozzle", + "sub_path": "machine/Creality Ender-3 Pro 0.6 nozzle.json" + }, + { + "name": "Creality Ender-3 Pro 0.8 nozzle", + "sub_path": "machine/Creality Ender-3 Pro 0.8 nozzle.json" + }, + { + "name": "Creality Ender-3 S1 0.4 nozzle", + "sub_path": "machine/Creality Ender-3 S1 0.4 nozzle.json" + }, + { + "name": "Creality Ender-3 S1 Pro 0.4 nozzle", + "sub_path": "machine/Creality Ender-3 S1 Pro 0.4 nozzle.json" + }, + { + "name": "Creality Ender-3 S1 Plus 0.2 nozzle", + "sub_path": "machine/Creality Ender-3 S1 Plus 0.2 nozzle.json" + }, + { + "name": "Creality Ender-3 S1 Plus 0.4 nozzle", + "sub_path": "machine/Creality Ender-3 S1 Plus 0.4 nozzle.json" + }, + { + "name": "Creality Ender-3 S1 Plus 0.6 nozzle", + "sub_path": "machine/Creality Ender-3 S1 Plus 0.6 nozzle.json" + }, + { + "name": "Creality Ender-3 S1 Plus 0.8 nozzle", + "sub_path": "machine/Creality Ender-3 S1 Plus 0.8 nozzle.json" + }, + { + "name": "Creality Ender-3 V3 SE 0.2 nozzle", + "sub_path": "machine/Creality Ender-3 V3 SE 0.2 nozzle.json" + }, + { + "name": "Creality Ender-3 V3 SE 0.4 nozzle", + "sub_path": "machine/Creality Ender-3 V3 SE 0.4 nozzle.json" + }, + { + "name": "Creality Ender-3 V3 SE 0.6 nozzle", + "sub_path": "machine/Creality Ender-3 V3 SE 0.6 nozzle.json" + }, + { + "name": "Creality Ender-3 V3 SE 0.8 nozzle", + "sub_path": "machine/Creality Ender-3 V3 SE 0.8 nozzle.json" + }, + { + "name": "Creality Ender-3 V3 KE 0.4 nozzle", + "sub_path": "machine/Creality Ender-3 V3 KE 0.4 nozzle.json" + }, + { + "name": "Creality Ender-3 V3 0.4 nozzle", + "sub_path": "machine/Creality Ender-3 V3 0.4 nozzle.json" + }, + { + "name": "Creality Ender-3 V3 0.6 nozzle", + "sub_path": "machine/Creality Ender-3 V3 0.6 nozzle.json" + }, + { + "name": "Creality Ender-3 V3 Plus 0.4 nozzle", + "sub_path": "machine/Creality Ender-3 V3 Plus 0.4 nozzle.json" + }, + { + "name": "Creality Ender-3 V3 Plus 0.6 nozzle", + "sub_path": "machine/Creality Ender-3 V3 Plus 0.6 nozzle.json" + }, + { + "name": "Creality Ender-5 0.4 nozzle", + "sub_path": "machine/Creality Ender-5 0.4 nozzle.json" + }, + { + "name": "Creality Ender-5 Max 0.4 nozzle", + "sub_path": "machine/Creality Ender-5 Max 0.4 nozzle.json" + }, + { + "name": "Creality Ender-5 Plus 0.4 nozzle", + "sub_path": "machine/Creality Ender-5 Plus 0.4 nozzle.json" + }, + { + "name": "Creality Ender-5 Pro (2019) 0.2 nozzle", + "sub_path": "machine/Creality Ender-5 Pro (2019) 0.2 nozzle.json" + }, + { + "name": "Creality Ender-5 Pro (2019) 0.25 nozzle", + "sub_path": "machine/Creality Ender-5 Pro (2019) 0.25 nozzle.json" + }, + { + "name": "Creality Ender-5 Pro (2019) 0.3 nozzle", + "sub_path": "machine/Creality Ender-5 Pro (2019) 0.3 nozzle.json" + }, + { + "name": "Creality Ender-5 Pro (2019) 0.4 nozzle", + "sub_path": "machine/Creality Ender-5 Pro (2019) 0.4 nozzle.json" + }, + { + "name": "Creality Ender-5 Pro (2019) 0.5 nozzle", + "sub_path": "machine/Creality Ender-5 Pro (2019) 0.5 nozzle.json" + }, + { + "name": "Creality Ender-5 Pro (2019) 0.6 nozzle", + "sub_path": "machine/Creality Ender-5 Pro (2019) 0.6 nozzle.json" + }, + { + "name": "Creality Ender-5 Pro (2019) 0.8 nozzle", + "sub_path": "machine/Creality Ender-5 Pro (2019) 0.8 nozzle.json" + }, + { + "name": "Creality Ender-5 Pro (2019) 1.0 nozzle", + "sub_path": "machine/Creality Ender-5 Pro (2019) 1.0 nozzle.json" + }, + { + "name": "Creality Ender-5S 0.4 nozzle", + "sub_path": "machine/Creality Ender-5S 0.4 nozzle.json" + }, + { + "name": "Creality Ender-5 S1 0.4 nozzle", + "sub_path": "machine/Creality Ender-5 S1 0.4 nozzle.json" + }, + { + "name": "Creality Sermoon V1 0.4 nozzle", + "sub_path": "machine/Creality Sermoon V1 0.4 nozzle.json" + }, + { + "name": "Creality K1 (0.4 nozzle)", + "sub_path": "machine/Creality K1 (0.4 nozzle).json" + }, + { + "name": "Creality K1 (0.6 nozzle)", + "sub_path": "machine/Creality K1 (0.6 nozzle).json" + }, + { + "name": "Creality K1 (0.8 nozzle)", + "sub_path": "machine/Creality K1 (0.8 nozzle).json" + }, + { + "name": "Creality K1C 0.4 nozzle", + "sub_path": "machine/Creality K1C 0.4 nozzle.json" + }, + { + "name": "Creality K1C 0.6 nozzle", + "sub_path": "machine/Creality K1C 0.6 nozzle.json" + }, + { + "name": "Creality K1C 0.8 nozzle", + "sub_path": "machine/Creality K1C 0.8 nozzle.json" + }, + { + "name": "Creality K1 SE 0.4 nozzle", + "sub_path": "machine/Creality K1 SE 0.4 nozzle.json" + }, + { + "name": "Creality K1 Max (0.4 nozzle)", + "sub_path": "machine/Creality K1 Max (0.4 nozzle).json" + }, + { + "name": "Creality K1 Max (0.6 nozzle)", + "sub_path": "machine/Creality K1 Max (0.6 nozzle).json" + }, + { + "name": "Creality K1 Max (0.8 nozzle)", + "sub_path": "machine/Creality K1 Max (0.8 nozzle).json" + }, + { + "name": "Creality K2 Plus 0.2 nozzle", + "sub_path": "machine/Creality K2 Plus 0.2 nozzle.json" + }, + { + "name": "Creality K2 Plus 0.4 nozzle", + "sub_path": "machine/Creality K2 Plus 0.4 nozzle.json" + }, + { + "name": "Creality K2 Plus 0.6 nozzle", + "sub_path": "machine/Creality K2 Plus 0.6 nozzle.json" + }, + { + "name": "Creality K2 Plus 0.8 nozzle", + "sub_path": "machine/Creality K2 Plus 0.8 nozzle.json" + }, + { + "name": "Creality Hi 0.4 nozzle", + "sub_path": "machine/Creality Hi 0.4 nozzle.json" + }, + { + "name": "Creality Hi 0.6 nozzle", + "sub_path": "machine/Creality Hi 0.6 nozzle.json" + } + ] +} diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-3V3-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-3V3-all.json new file mode 100644 index 0000000..e28e148 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-3V3-all.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Generic ABS @Ender-3V3-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic ABS", + "filament_max_volumetric_speed": ["9"], + "slow_down_layer_time": ["5"], + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", + "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", + "Creality Ender-3 V3 KE 0.4 nozzle", + "Creality Ender-3 V3 0.4 nozzle", + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-5Max-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-5Max-all.json new file mode 100644 index 0000000..f7f1c80 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Ender-5Max-all.json @@ -0,0 +1,99 @@ +{ + "type": "filament", + "filament_id": "07001", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Generic ABS @Ender-5Max-all", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_common", + "activate_air_filtration": "0", + "activate_chamber_temp_control": "0", + "additional_cooling_fan_speed": "0", + "chamber_temperature": "35", + "close_fan_the_first_x_layers": "3", + "compatible_printers": [ + "Creality Ender-5 Max 0.4 nozzle" + ], + "complete_print_exhaust_fan_speed": "80", + "cool_plate_temp": "90", + "cool_plate_temp_initial_layer": "90", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "during_print_exhaust_fan_speed": "60", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "eng_plate_temp": "105", + "eng_plate_temp_initial_layer": "105", + "fan_cooling_layer_time": "30", + "fan_max_speed": "20", + "fan_min_speed": "20", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_cost": "15", + "filament_density": "1.08", + "filament_deretraction_speed": "nil", + "filament_diameter": "1.75", + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": "0.85", + "filament_is_support": "0", + "filament_load_time": "0", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_max_volumetric_speed": "35", + "filament_minimal_purge_on_wipe_tower": "15", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_before_wipe": "nil", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_retract_restart_extra": "0", + "filament_retract_when_changing_layer": "nil", + "filament_retraction_length": "nil", + "filament_retraction_minimum_travel": "nil", + "filament_retraction_speed": "nil", + "filament_shrink": "100%", + "filament_soluble": "0", + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "filament_toolchange_delay": "0", + "filament_type": [ + "ABS" + ], + "filament_unload_time": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "filament_vendor": [ + "Creality" + ], + "filament_wipe": "nil", + "filament_wipe_distance": "nil", + "filament_z_hop": "nil", + "filament_z_hop_types": "nil", + "full_fan_speed_layer": "0", + "hot_plate_temp": "90", + "hot_plate_temp_initial_layer": "90", + "nozzle_temperature": "260", + "nozzle_temperature_initial_layer": "260", + "nozzle_temperature_range_high": "260", + "nozzle_temperature_range_low": "230", + "overhang_fan_speed": "20", + "overhang_fan_threshold": "25%", + "pressure_advance": "0.03", + "reduce_fan_stop_start_freq": "1", + "required_nozzle_HRC": "0", + "slow_down_for_layer_cooling": "1", + "slow_down_layer_time": "5", + "slow_down_min_speed": "10", + "support_material_interface_fan_speed": "-1", + "temperature_vitrification": "110", + "textured_plate_temp": "90", + "textured_plate_temp_initial_layer": "90" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Hi-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Hi-all.json new file mode 100644 index 0000000..8868260 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @Hi-all.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Generic ABS @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic ABS", + "filament_max_volumetric_speed": ["9"], + "slow_down_layer_time": ["5"], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n"], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @K1-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @K1-all.json new file mode 100644 index 0000000..f5bc4e3 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @K1-all.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Generic ABS @K1-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic ABS", + "filament_max_volumetric_speed": [ + "14" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle", + "Creality K1 SE 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @K2-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @K2-all.json new file mode 100644 index 0000000..83007ba --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS @K2-all.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Generic ABS @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic ABS", + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS.json new file mode 100644 index 0000000..518de65 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ABS.json @@ -0,0 +1,64 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "name": "Creality Generic ABS", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_abs", + "filament_flow_ratio": ["0.926"], + "filament_max_volumetric_speed": ["12"], + "compatible_printers": [ + "Creality CR-10 V2 0.4 nozzle", + "Creality CR-10 Max 0.4 nozzle", + "Creality CR-6 SE 0.2 nozzle", + "Creality CR-6 SE 0.4 nozzle", + "Creality CR-6 SE 0.6 nozzle", + "Creality CR-6 SE 0.8 nozzle", + "Creality CR-6 Max 0.2 nozzle", + "Creality CR-6 Max 0.4 nozzle", + "Creality CR-6 Max 0.6 nozzle", + "Creality CR-6 Max 0.8 nozzle", + "Creality Sermoon V1 0.4 nozzle", + "Creality Ender-3 0.2 nozzle", + "Creality Ender-3 0.4 nozzle", + "Creality Ender-3 0.6 nozzle", + "Creality Ender-3 0.8 nozzle", + "Creality Ender-3 Pro 0.2 nozzle", + "Creality Ender-3 Pro 0.4 nozzle", + "Creality Ender-3 Pro 0.6 nozzle", + "Creality Ender-3 Pro 0.8 nozzle", + "Creality Ender-3 V2 0.4 nozzle", + "Creality Ender-3 V2 Neo 0.4 nozzle", + "Creality Ender-3 S1 0.4 nozzle", + "Creality Ender-3 S1 Pro 0.4 nozzle", + "Creality Ender-3 S1 Plus 0.2 nozzle", + "Creality Ender-3 S1 Plus 0.4 nozzle", + "Creality Ender-3 S1 Plus 0.6 nozzle", + "Creality Ender-3 S1 Plus 0.8 nozzle", + "Creality Ender-5 0.4 nozzle", + "Creality Ender-5 Plus 0.4 nozzle", + "Creality Ender-5 Pro (2019) 0.2 nozzle", + "Creality Ender-5 Pro (2019) 0.25 nozzle", + "Creality Ender-5 Pro (2019) 0.3 nozzle", + "Creality Ender-5 Pro (2019) 0.4 nozzle", + "Creality Ender-5 Pro (2019) 0.5 nozzle", + "Creality Ender-5 Pro (2019) 0.6 nozzle", + "Creality Ender-5 Pro (2019) 0.8 nozzle", + "Creality Ender-5 Pro (2019) 1.0 nozzle", + "Creality Ender-5S 0.4 nozzle", + "Creality Ender-5 S1 0.4 nozzle", + "Creality Ender-6 0.4 nozzle", + "Creality K1 (0.4 nozzle)", + "Creality K1 (0.6 nozzle)", + "Creality K1 (0.8 nozzle)", + "Creality K1 Max (0.4 nozzle)", + "Creality K1 Max (0.6 nozzle)", + "Creality K1 Max (0.8 nozzle)", + "Creality CR-10 SE 0.2 nozzle", + "Creality CR-10 SE 0.4 nozzle", + "Creality CR-10 SE 0.6 nozzle", + "Creality CR-10 SE 0.8 nozzle", + "Creality CR-M4 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-3V3-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-3V3-all.json new file mode 100644 index 0000000..bf2d0f3 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-3V3-all.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "setting_id": "GFSA04_00", + "name": "Creality Generic ASA @Ender-3V3-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic ASA", + "filament_max_volumetric_speed": ["9"], + "slow_down_layer_time": ["5"], + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", + "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", + "Creality Ender-3 V3 KE 0.4 nozzle", + "Creality Ender-3 V3 0.4 nozzle", + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-5Max-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-5Max-all.json new file mode 100644 index 0000000..ae35ac9 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Ender-5Max-all.json @@ -0,0 +1,99 @@ +{ + "type": "filament", + "filament_id": "19001", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Generic ASA @Ender-5Max-all", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_common", + "activate_air_filtration": "0", + "activate_chamber_temp_control": "0", + "additional_cooling_fan_speed": "0", + "chamber_temperature": "55", + "close_fan_the_first_x_layers": "1", + "compatible_printers": [ + "Creality Ender-5 Max 0.4 nozzle" + ], + "complete_print_exhaust_fan_speed": "80", + "cool_plate_temp": "90", + "cool_plate_temp_initial_layer": "90", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "during_print_exhaust_fan_speed": "60", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "eng_plate_temp": "50", + "eng_plate_temp_initial_layer": "50", + "fan_cooling_layer_time": "30", + "fan_max_speed": "20", + "fan_min_speed": "20", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_cost": "29", + "filament_density": "1.15", + "filament_deretraction_speed": "nil", + "filament_diameter": "1.75", + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": "0.85", + "filament_is_support": "0", + "filament_load_time": "0", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_max_volumetric_speed": "35", + "filament_minimal_purge_on_wipe_tower": "15", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_before_wipe": "nil", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_retract_restart_extra": "nil", + "filament_retract_when_changing_layer": "nil", + "filament_retraction_length": "nil", + "filament_retraction_minimum_travel": "nil", + "filament_retraction_speed": "nil", + "filament_shrink": "100%", + "filament_soluble": "0", + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_toolchange_delay": "0", + "filament_type": [ + "ASA" + ], + "filament_unload_time": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "filament_vendor": [ + "Creality" + ], + "filament_wipe": "nil", + "filament_wipe_distance": "nil", + "filament_z_hop": "nil", + "filament_z_hop_types": "nil", + "full_fan_speed_layer": "0", + "hot_plate_temp": "90", + "hot_plate_temp_initial_layer": "90", + "nozzle_temperature": "260", + "nozzle_temperature_initial_layer": "260", + "nozzle_temperature_range_high": "280", + "nozzle_temperature_range_low": "240", + "overhang_fan_speed": "20", + "overhang_fan_threshold": "50%", + "pressure_advance": "0.032", + "reduce_fan_stop_start_freq": "1", + "required_nozzle_HRC": "0", + "slow_down_for_layer_cooling": "1", + "slow_down_layer_time": "5", + "slow_down_min_speed": "10", + "support_material_interface_fan_speed": "-1", + "temperature_vitrification": "110", + "textured_plate_temp": "90", + "textured_plate_temp_initial_layer": "90" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Hi-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Hi-all.json new file mode 100644 index 0000000..d73dc9a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @Hi-all.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "setting_id": "GFSA04_00", + "name": "Creality Generic ASA @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic ASA", + "filament_max_volumetric_speed": ["9"], + "slow_down_layer_time": ["5"], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n"], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @K1-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @K1-all.json new file mode 100644 index 0000000..6f24db9 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @K1-all.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "setting_id": "GFSA04_00", + "name": "Creality Generic ASA @K1-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic ASA", + "filament_max_volumetric_speed": [ + "12" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle", + "Creality K1 SE 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @K2-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @K2-all.json new file mode 100644 index 0000000..007ea26 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA @K2-all.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "setting_id": "GFSA04_00", + "name": "Creality Generic ASA @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic ASA", + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA-CF @Hi-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA-CF @Hi-all.json new file mode 100644 index 0000000..e757f82 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA-CF @Hi-all.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "setting_id": "GFSA04_00", + "name": "Creality Generic ASA-CF @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic ASA @Hi-all", + "filament_max_volumetric_speed": ["9"], + "slow_down_layer_time": ["5"], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA.json new file mode 100644 index 0000000..8b7204b --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic ASA.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "filament_id": "GFB98", + "setting_id": "GFSA04", + "name": "Creality Generic ASA", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_asa", + "filament_flow_ratio": ["0.926"], + "filament_max_volumetric_speed": ["12"], + "compatible_printers": [ + "Creality CR-10 V2 0.4 nozzle", + "Creality CR-10 Max 0.4 nozzle", + "Creality CR-6 SE 0.2 nozzle", + "Creality CR-6 SE 0.4 nozzle", + "Creality CR-6 SE 0.6 nozzle", + "Creality CR-6 SE 0.8 nozzle", + "Creality CR-6 Max 0.2 nozzle", + "Creality CR-6 Max 0.4 nozzle", + "Creality CR-6 Max 0.6 nozzle", + "Creality CR-6 Max 0.8 nozzle", + "Creality Ender-3 V2 0.4 nozzle", + "Creality Ender-3 0.2 nozzle", + "Creality Ender-3 0.4 nozzle", + "Creality Ender-3 0.6 nozzle", + "Creality Ender-3 0.8 nozzle", + "Creality Ender-3 Pro 0.2 nozzle", + "Creality Ender-3 Pro 0.4 nozzle", + "Creality Ender-3 Pro 0.6 nozzle", + "Creality Ender-3 Pro 0.8 nozzle", + "Creality Ender-3 V2 Neo 0.4 nozzle", + "Creality Ender-3 S1 0.4 nozzle", + "Creality Ender-3 S1 Pro 0.4 nozzle", + "Creality Ender-5 0.4 nozzle", + "Creality Ender-5 Plus 0.4 nozzle", + "Creality Ender-5 Pro (2019) 0.2 nozzle", + "Creality Ender-5 Pro (2019) 0.25 nozzle", + "Creality Ender-5 Pro (2019) 0.3 nozzle", + "Creality Ender-5 Pro (2019) 0.4 nozzle", + "Creality Ender-5 Pro (2019) 0.5 nozzle", + "Creality Ender-5 Pro (2019) 0.6 nozzle", + "Creality Ender-5 Pro (2019) 0.8 nozzle", + "Creality Ender-5 Pro (2019) 1.0 nozzle", + "Creality Ender-5S 0.4 nozzle", + "Creality Ender-5 S1 0.4 nozzle", + "Creality Ender-6 0.4 nozzle", + "Creality K1 (0.4 nozzle)", + "Creality K1 (0.6 nozzle)", + "Creality K1 (0.8 nozzle)", + "Creality K1 Max (0.4 nozzle)", + "Creality K1 Max (0.6 nozzle)", + "Creality K1 Max (0.8 nozzle)" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PA @Ender-5Max-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PA @Ender-5Max-all.json new file mode 100644 index 0000000..a6db02e --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PA @Ender-5Max-all.json @@ -0,0 +1,99 @@ +{ + "type": "filament", + "filament_id": "11001", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Generic PA @Ender-5Max-all", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_common", + "activate_air_filtration": "0", + "activate_chamber_temp_control": "0", + "additional_cooling_fan_speed": "0", + "chamber_temperature": "35", + "close_fan_the_first_x_layers": "1", + "compatible_printers": [ + "Creality Ender-5 Max 0.4 nozzle" + ], + "complete_print_exhaust_fan_speed": "100", + "cool_plate_temp": "45", + "cool_plate_temp_initial_layer": "45", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "during_print_exhaust_fan_speed": "0", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "eng_plate_temp": "100", + "eng_plate_temp_initial_layer": "100", + "fan_cooling_layer_time": "100", + "fan_max_speed": "100", + "fan_min_speed": "100", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_cost": "50", + "filament_density": "1.24", + "filament_deretraction_speed": "nil", + "filament_diameter": "1.75", + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": "0.9", + "filament_is_support": "0", + "filament_load_time": "0", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_max_volumetric_speed": "2", + "filament_minimal_purge_on_wipe_tower": "15", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_before_wipe": "nil", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_retract_restart_extra": "0", + "filament_retract_when_changing_layer": "nil", + "filament_retraction_length": "1.5", + "filament_retraction_minimum_travel": "nil", + "filament_retraction_speed": "nil", + "filament_shrink": "100%", + "filament_soluble": "0", + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "filament_toolchange_delay": "0", + "filament_type": [ + "PA" + ], + "filament_unload_time": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "filament_vendor": [ + "Creality" + ], + "filament_wipe": "nil", + "filament_wipe_distance": "nil", + "filament_z_hop": "0.2", + "filament_z_hop_types": "nil", + "full_fan_speed_layer": "0", + "hot_plate_temp": "45", + "hot_plate_temp_initial_layer": "45", + "nozzle_temperature": "250", + "nozzle_temperature_initial_layer": "250", + "nozzle_temperature_range_high": "280", + "nozzle_temperature_range_low": "250", + "overhang_fan_speed": "50", + "overhang_fan_threshold": "50%", + "pressure_advance": "0.042", + "reduce_fan_stop_start_freq": "1", + "required_nozzle_HRC": "40", + "slow_down_for_layer_cooling": "1", + "slow_down_layer_time": "8", + "slow_down_min_speed": "5", + "support_material_interface_fan_speed": "-1", + "temperature_vitrification": "108", + "textured_plate_temp": "45", + "textured_plate_temp_initial_layer": "45" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @Ender-3V3-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @Ender-3V3-all.json new file mode 100644 index 0000000..1c86dd1 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @Ender-3V3-all.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Creality Generic PA-CF @Ender-3V3-all", + "inherits": "Creality Generic PA-CF", + "from": "system", + "setting_id": "GFSN99_01", + "instantiation": "true", + "compatible_printers": [ + "Creality Ender-3 V3 0.4 nozzle", + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K1-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K1-all.json new file mode 100644 index 0000000..cdf6f7a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K1-all.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "name": "Creality Generic PA-CF @K1-all", + "inherits": "Creality Generic PA-CF", + "from": "system", + "setting_id": "GFSN99_01", + "instantiation": "true", + "compatible_printers": [ + "Creality K1 (0.4 nozzle)", + "Creality K1 (0.6 nozzle)", + "Creality K1 (0.8 nozzle)", + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle", + "Creality K1 SE 0.4 nozzle", + "Creality K1 Max (0.4 nozzle)", + "Creality K1 Max (0.6 nozzle)", + "Creality K1 Max (0.8 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K2-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K2-all.json new file mode 100644 index 0000000..639109c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF @K2-all.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "name": "Creality Generic PA-CF @K2-all", + "inherits": "Creality Generic PA-CF", + "from": "system", + "setting_id": "GFSN99_01", + "instantiation": "true", + "nozzle_temperature_initial_layer": [ + "280" + ], + "nozzle_temperature": [ + "280" + ], + "fan_min_speed": [ + "30" + ], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF.json new file mode 100644 index 0000000..3b84e25 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PA-CF.json @@ -0,0 +1,82 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "Creality Generic PA-CF", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pa", + "filament_type": [ + "PA-CF" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature": [ + "290" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "0%" + ], + "overhang_fan_speed": [ + "40" + ], + "fan_cooling_layer_time": [ + "5" + ], + "full_fan_speed_layer": [ + "2" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.01" + ], + "compatible_printers": [ + "Creality CR-10 V2 0.4 nozzle", + "Creality CR-10 Max 0.4 nozzle", + "Creality CR-6 SE 0.2 nozzle", + "Creality CR-6 SE 0.4 nozzle", + "Creality CR-6 SE 0.6 nozzle", + "Creality CR-6 SE 0.8 nozzle", + "Creality CR-6 Max 0.2 nozzle", + "Creality CR-6 Max 0.4 nozzle", + "Creality CR-6 Max 0.6 nozzle", + "Creality CR-6 Max 0.8 nozzle", + "Creality Ender-3 0.2 nozzle", + "Creality Ender-3 0.4 nozzle", + "Creality Ender-3 0.6 nozzle", + "Creality Ender-3 0.8 nozzle", + "Creality Ender-3 Pro 0.2 nozzle", + "Creality Ender-3 Pro 0.4 nozzle", + "Creality Ender-3 Pro 0.6 nozzle", + "Creality Ender-3 Pro 0.8 nozzle", + "Creality Ender-3 V2 0.4 nozzle", + "Creality Ender-3 V2 Neo 0.4 nozzle", + "Creality Ender-3 S1 0.4 nozzle", + "Creality Ender-3 S1 Pro 0.4 nozzle", + "Creality Ender-5 0.4 nozzle", + "Creality Ender-5 Plus 0.4 nozzle", + "Creality Ender-5 Pro (2019) 0.2 nozzle", + "Creality Ender-5 Pro (2019) 0.25 nozzle", + "Creality Ender-5 Pro (2019) 0.3 nozzle", + "Creality Ender-5 Pro (2019) 0.4 nozzle", + "Creality Ender-5 Pro (2019) 0.5 nozzle", + "Creality Ender-5 Pro (2019) 0.6 nozzle", + "Creality Ender-5 Pro (2019) 0.8 nozzle", + "Creality Ender-5 Pro (2019) 1.0 nozzle", + "Creality Ender-5S 0.4 nozzle", + "Creality Ender-5 S1 0.4 nozzle", + "Creality Ender-6 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PC @K1-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PC @K1-all.json new file mode 100644 index 0000000..dd9b382 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PC @K1-all.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Creality Generic PC @K1-all", + "inherits": "Creality Generic PC", + "from": "system", + "setting_id": "GFSC99_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Creality K1 (0.4 nozzle)", + "Creality K1 (0.6 nozzle)", + "Creality K1 (0.8 nozzle)", + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle", + "Creality K1 SE 0.4 nozzle", + "Creality K1 Max (0.4 nozzle)", + "Creality K1 Max (0.6 nozzle)", + "Creality K1 Max (0.8 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PC.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PC.json new file mode 100644 index 0000000..800c1c9 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PC.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Creality Generic PC", + "inherits": "fdm_filament_pc", + "from": "system", + "filament_id": "GFC99", + "instantiation": "false", + "filament_max_volumetric_speed": [ + "16" + ], + "filament_flow_ratio": [ + "0.94" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-3V3-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-3V3-all.json new file mode 100644 index 0000000..6b93b85 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-3V3-all.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "setting_id": "GFSG99_00", + "name": "Creality Generic PETG @Ender-3V3-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PETG", + "filament_max_volumetric_speed": ["9"], + "slow_down_layer_time": ["5"], + "cool_plate_temp" : ["70"], + "eng_plate_temp" : ["70"], + "hot_plate_temp" : ["70"], + "textured_plate_temp" : ["70"], + "cool_plate_temp_initial_layer" : ["70"], + "eng_plate_temp_initial_layer" : ["70"], + "hot_plate_temp_initial_layer" : ["70"], + "textured_plate_temp_initial_layer" : ["70"], + "nozzle_temperature_initial_layer": ["250"], + "nozzle_temperature": ["250"], + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", + "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", + "Creality Ender-3 V3 KE 0.4 nozzle", + "Creality Ender-3 V3 0.4 nozzle", + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-5Max-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-5Max-all.json new file mode 100644 index 0000000..a991a63 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Ender-5Max-all.json @@ -0,0 +1,99 @@ +{ + "type": "filament", + "filament_id": "06001", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Generic PETG @Ender-5Max-all", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_common", + "activate_air_filtration": "0", + "activate_chamber_temp_control": "0", + "additional_cooling_fan_speed": "0", + "chamber_temperature": "35", + "close_fan_the_first_x_layers": "1", + "compatible_printers": [ + "Creality Ender-5 Max 0.4 nozzle" + ], + "complete_print_exhaust_fan_speed": "80", + "cool_plate_temp": "70", + "cool_plate_temp_initial_layer": "70", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "during_print_exhaust_fan_speed": "60", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "eng_plate_temp": "0", + "eng_plate_temp_initial_layer": "0", + "fan_cooling_layer_time": "30", + "fan_max_speed": "100", + "fan_min_speed": "100", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_cost": "14", + "filament_density": "1.23", + "filament_deretraction_speed": "nil", + "filament_diameter": "1.75", + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": "0.85", + "filament_is_support": "0", + "filament_load_time": "0", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_max_volumetric_speed": "30", + "filament_minimal_purge_on_wipe_tower": "15", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_before_wipe": "nil", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_retract_restart_extra": "0", + "filament_retract_when_changing_layer": "nil", + "filament_retraction_length": "nil", + "filament_retraction_minimum_travel": "nil", + "filament_retraction_speed": "nil", + "filament_shrink": "100%", + "filament_soluble": "0", + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_toolchange_delay": "0", + "filament_type": [ + "PETG" + ], + "filament_unload_time": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "filament_vendor": [ + "Creality" + ], + "filament_wipe": "nil", + "filament_wipe_distance": "nil", + "filament_z_hop": "nil", + "filament_z_hop_types": "nil", + "full_fan_speed_layer": "0", + "hot_plate_temp": "70", + "hot_plate_temp_initial_layer": "70", + "nozzle_temperature": "250", + "nozzle_temperature_initial_layer": "250", + "nozzle_temperature_range_high": "270", + "nozzle_temperature_range_low": "220", + "overhang_fan_speed": "100", + "overhang_fan_threshold": "25%", + "pressure_advance": "0.038", + "reduce_fan_stop_start_freq": "1", + "required_nozzle_HRC": "0", + "slow_down_for_layer_cooling": "1", + "slow_down_layer_time": "8", + "slow_down_min_speed": "10", + "support_material_interface_fan_speed": "-1", + "temperature_vitrification": "80", + "textured_plate_temp": "70", + "textured_plate_temp_initial_layer": "70" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Hi-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Hi-all.json new file mode 100644 index 0000000..a5d13fd --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @Hi-all.json @@ -0,0 +1,25 @@ +{ + "type": "filament", + "setting_id": "GFSG99_00", + "name": "Creality Generic PETG @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PETG", + "filament_max_volumetric_speed": ["9"], + "slow_down_layer_time": ["5"], + "cool_plate_temp" : ["70"], + "eng_plate_temp" : ["70"], + "hot_plate_temp" : ["70"], + "textured_plate_temp" : ["70"], + "cool_plate_temp_initial_layer" : ["70"], + "eng_plate_temp_initial_layer" : ["70"], + "hot_plate_temp_initial_layer" : ["70"], + "textured_plate_temp_initial_layer" : ["70"], + "nozzle_temperature_initial_layer": ["250"], + "nozzle_temperature": ["250"], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n"], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @K1-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @K1-all.json new file mode 100644 index 0000000..22600d8 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @K1-all.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "setting_id": "GFSG99_00", + "name": "Creality Generic PETG @K1-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PETG", + "filament_max_volumetric_speed": [ + "9" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "cool_plate_temp": [ + "70" + ], + "eng_plate_temp": [ + "70" + ], + "hot_plate_temp": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature": [ + "250" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "compatible_printers": [ + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle", + "Creality K1 SE 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @K2-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @K2-all.json new file mode 100644 index 0000000..c01d3e4 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG @K2-all.json @@ -0,0 +1,60 @@ +{ + "type": "filament", + "setting_id": "GFSG99_00", + "name": "Creality Generic PETG @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PETG", + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "cool_plate_temp": [ + "70" + ], + "eng_plate_temp": [ + "50" + ], + "hot_plate_temp": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature": [ + "250" + ], + "fan_max_speed": [ + "80" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG-CF @Hi-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG-CF @Hi-all.json new file mode 100644 index 0000000..e09239c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG-CF @Hi-all.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "setting_id": "GFSG99_00", + "name": "Creality Generic PETG-CF @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PETG @Hi-all", + "filament_max_volumetric_speed": ["9"], + "filament_flow_ratio": ["0.95"], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG.json new file mode 100644 index 0000000..365e513 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PETG.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "filament_id": "GFG99", + "setting_id": "GFSA04", + "name": "Creality Generic PETG", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pet", + "reduce_fan_stop_start_freq": ["1"], + "slow_down_for_layer_cooling": ["1"], + "fan_cooling_layer_time": ["30"], + "overhang_fan_speed": ["90"], + "overhang_fan_threshold": ["25%"], + "fan_max_speed": ["90"], + "fan_min_speed": ["40"], + "slow_down_min_speed": ["10"], + "slow_down_layer_time": ["8"], + "filament_flow_ratio": ["0.95"], + "filament_max_volumetric_speed": ["10"], + "filament_start_gcode": ["; filament start gcode\n"], + "compatible_printers": [ + "Creality CR-10 V2 0.4 nozzle", + "Creality CR-10 Max 0.4 nozzle", + "Creality CR-6 SE 0.2 nozzle", + "Creality CR-6 SE 0.4 nozzle", + "Creality CR-6 SE 0.6 nozzle", + "Creality CR-6 SE 0.8 nozzle", + "Creality CR-6 Max 0.2 nozzle", + "Creality CR-6 Max 0.4 nozzle", + "Creality CR-6 Max 0.6 nozzle", + "Creality CR-6 Max 0.8 nozzle", + "Creality Sermoon V1 0.4 nozzle", + "Creality Ender-3 0.2 nozzle", + "Creality Ender-3 0.4 nozzle", + "Creality Ender-3 0.6 nozzle", + "Creality Ender-3 0.8 nozzle", + "Creality Ender-3 Pro 0.2 nozzle", + "Creality Ender-3 Pro 0.4 nozzle", + "Creality Ender-3 Pro 0.6 nozzle", + "Creality Ender-3 Pro 0.8 nozzle", + "Creality Ender-3 V2 0.4 nozzle", + "Creality Ender-3 V2 Neo 0.4 nozzle", + "Creality Ender-3 S1 0.4 nozzle", + "Creality Ender-3 S1 Pro 0.4 nozzle", + "Creality Ender-3 S1 Plus 0.2 nozzle", + "Creality Ender-3 S1 Plus 0.4 nozzle", + "Creality Ender-3 S1 Plus 0.6 nozzle", + "Creality Ender-3 S1 Plus 0.8 nozzle", + "Creality Ender-5 0.4 nozzle", + "Creality Ender-5 Plus 0.4 nozzle", + "Creality Ender-5 Pro (2019) 0.2 nozzle", + "Creality Ender-5 Pro (2019) 0.25 nozzle", + "Creality Ender-5 Pro (2019) 0.3 nozzle", + "Creality Ender-5 Pro (2019) 0.4 nozzle", + "Creality Ender-5 Pro (2019) 0.5 nozzle", + "Creality Ender-5 Pro (2019) 0.6 nozzle", + "Creality Ender-5 Pro (2019) 0.8 nozzle", + "Creality Ender-5 Pro (2019) 1.0 nozzle", + "Creality Ender-5S 0.4 nozzle", + "Creality Ender-5 S1 0.4 nozzle", + "Creality Ender-6 0.4 nozzle", + "Creality K1 (0.4 nozzle)", + "Creality K1 (0.6 nozzle)", + "Creality K1 (0.8 nozzle)", + "Creality K1 Max (0.4 nozzle)", + "Creality K1 Max (0.6 nozzle)", + "Creality K1 Max (0.8 nozzle)", + "Creality CR-10 SE 0.2 nozzle", + "Creality CR-10 SE 0.4 nozzle", + "Creality CR-10 SE 0.6 nozzle", + "Creality CR-10 SE 0.8 nozzle", + "Creality CR-M4 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-3V3-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-3V3-all.json new file mode 100644 index 0000000..e2f8941 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-3V3-all.json @@ -0,0 +1,29 @@ +{ + "type": "filament", + "setting_id": "GFSL99_00", + "name": "Creality Generic PLA @Ender-3V3-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA", + "filament_max_volumetric_speed": ["18"], + "slow_down_min_speed": ["20"], + "cool_plate_temp" : ["55"], + "eng_plate_temp" : ["55"], + "hot_plate_temp" : ["55"], + "textured_plate_temp" : ["55"], + "cool_plate_temp_initial_layer" : ["55"], + "eng_plate_temp_initial_layer" : ["55"], + "hot_plate_temp_initial_layer" : ["55"], + "textured_plate_temp_initial_layer" : ["55"], + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", + "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", + "Creality Ender-3 V3 KE 0.4 nozzle", + "Creality Ender-3 V3 0.4 nozzle", + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-5Max-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-5Max-all.json new file mode 100644 index 0000000..6d57398 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Ender-5Max-all.json @@ -0,0 +1,99 @@ +{ + "type": "filament", + "filament_id": "04001", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Generic PLA @Ender-5Max-all", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_common", + "activate_air_filtration": "0", + "activate_chamber_temp_control": "0", + "additional_cooling_fan_speed": "0", + "chamber_temperature": "35", + "close_fan_the_first_x_layers": "1", + "compatible_printers": [ + "Creality Ender-5 Max 0.4 nozzle" + ], + "complete_print_exhaust_fan_speed": "80", + "cool_plate_temp": "45", + "cool_plate_temp_initial_layer": "45", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "during_print_exhaust_fan_speed": "60", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "eng_plate_temp": "50", + "eng_plate_temp_initial_layer": "50", + "fan_cooling_layer_time": "100", + "fan_max_speed": "100", + "fan_min_speed": "100", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_cost": "20", + "filament_density": "1.24", + "filament_deretraction_speed": "nil", + "filament_diameter": "1.75", + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": "0.9", + "filament_is_support": "0", + "filament_load_time": "0", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_max_volumetric_speed": "40", + "filament_minimal_purge_on_wipe_tower": "15", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_before_wipe": "nil", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_retract_restart_extra": "0", + "filament_retract_when_changing_layer": "nil", + "filament_retraction_length": "nil", + "filament_retraction_minimum_travel": "nil", + "filament_retraction_speed": "nil", + "filament_shrink": "100%", + "filament_soluble": "0", + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "filament_toolchange_delay": "0", + "filament_type": [ + "PLA" + ], + "filament_unload_time": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "filament_vendor": [ + "Generic" + ], + "filament_wipe": "nil", + "filament_wipe_distance": "nil", + "filament_z_hop": "nil", + "filament_z_hop_types": "nil", + "full_fan_speed_layer": "0", + "hot_plate_temp": "45", + "hot_plate_temp_initial_layer": "45", + "nozzle_temperature": "220", + "nozzle_temperature_initial_layer": "220", + "nozzle_temperature_range_high": "240", + "nozzle_temperature_range_low": "190", + "overhang_fan_speed": "100", + "overhang_fan_threshold": "25%", + "pressure_advance": "0.03", + "reduce_fan_stop_start_freq": "1", + "required_nozzle_HRC": "0", + "slow_down_for_layer_cooling": "1", + "slow_down_layer_time": "5", + "slow_down_min_speed": "10", + "support_material_interface_fan_speed": "-1", + "temperature_vitrification": "60", + "textured_plate_temp": "45", + "textured_plate_temp_initial_layer": "45" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Hi-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Hi-all.json new file mode 100644 index 0000000..39ff7bf --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @Hi-all.json @@ -0,0 +1,94 @@ +{ + "type": "filament", + "setting_id": "GFSL99_00", + "name": "Creality Generic PLA @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA", + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_min_speed": [ + "20" + ], + "cool_plate_temp": [ + "55" + ], + "eng_plate_temp": [ + "55" + ], + "hot_plate_temp": [ + "55" + ], + "textured_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_load_time": [ + "0" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unload_time": [ + "0" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n"], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @K1-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @K1-all.json new file mode 100644 index 0000000..458e578 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @K1-all.json @@ -0,0 +1,47 @@ +{ + "type": "filament", + "setting_id": "GFSL99_00", + "name": "Creality Generic PLA @K1-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA", + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_min_speed": [ + "20" + ], + "cool_plate_temp": [ + "55" + ], + "eng_plate_temp": [ + "55" + ], + "hot_plate_temp": [ + "55" + ], + "textured_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "compatible_printers": [ + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle", + "Creality K1 SE 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @K2-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @K2-all.json new file mode 100644 index 0000000..3bbc824 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA @K2-all.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "setting_id": "GFSL99_00", + "name": "Creality Generic PLA @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA", + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "4" + ], + "cool_plate_temp": [ + "50" + ], + "eng_plate_temp": [ + "50" + ], + "hot_plate_temp": [ + "50" + ], + "textured_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json new file mode 100644 index 0000000..4c26875 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json @@ -0,0 +1,22 @@ +{ + "type": "filament", + "setting_id": "GFSL95_00", + "name": "Creality Generic PLA High Speed @Ender-3V3-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @Ender-3V3-all", + "filament_max_volumetric_speed": [ + "23" + ], + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", + "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", + "Creality Ender-3 V3 KE 0.4 nozzle", + "Creality Ender-3 V3 0.4 nozzle", + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Hi-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Hi-all.json new file mode 100644 index 0000000..b661edd --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @Hi-all.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "setting_id": "GFSL95_00", + "name": "Creality Generic PLA High Speed @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @Hi-all", + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K1-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K1-all.json new file mode 100644 index 0000000..1f4bc1e --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K1-all.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "setting_id": "GFSL95_00", + "name": "Creality Generic PLA High Speed @K1-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @K1-all", + "filament_max_volumetric_speed": [ + "23" + ], + "compatible_printers": [ + "Creality K1 (0.4 nozzle)", + "Creality K1 (0.6 nozzle)", + "Creality K1 (0.8 nozzle)", + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle", + "Creality K1 SE 0.4 nozzle", + "Creality K1 Max (0.4 nozzle)", + "Creality K1 Max (0.6 nozzle)", + "Creality K1 Max (0.8 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K2-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K2-all.json new file mode 100644 index 0000000..e6572ec --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA High Speed @K2-all.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "setting_id": "GFSL95_00", + "name": "Creality Generic PLA High Speed @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @K2-all", + "filament_max_volumetric_speed": [ + "23" + ], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json new file mode 100644 index 0000000..743bb8c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "setting_id": "GFSL05_00", + "name": "Creality Generic PLA Matte @Ender-3V3-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @Ender-3V3-all", + "filament_max_volumetric_speed": ["18"], + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", + "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", + "Creality Ender-3 V3 KE 0.4 nozzle", + "Creality Ender-3 V3 0.4 nozzle", + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Hi-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Hi-all.json new file mode 100644 index 0000000..540725c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @Hi-all.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "setting_id": "GFSL05_00", + "name": "Creality Generic PLA Matte @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @Hi-all", + "filament_max_volumetric_speed": [ + "18" + ], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K1-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K1-all.json new file mode 100644 index 0000000..ce0da80 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K1-all.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "setting_id": "GFSL05_00", + "name": "Creality Generic PLA Matte @K1-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @K1-all", + "filament_max_volumetric_speed": [ + "18" + ], + "compatible_printers": [ + "Creality K1 (0.4 nozzle)", + "Creality K1 (0.6 nozzle)", + "Creality K1 (0.8 nozzle)", + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle", + "Creality K1 SE 0.4 nozzle", + "Creality K1 Max (0.4 nozzle)", + "Creality K1 Max (0.6 nozzle)", + "Creality K1 Max (0.8 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K2-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K2-all.json new file mode 100644 index 0000000..354200f --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Matte @K2-all.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "setting_id": "GFSL05_00", + "name": "Creality Generic PLA Matte @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @K2-all", + "filament_max_volumetric_speed": [ + "18" + ], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json new file mode 100644 index 0000000..389abbe --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "setting_id": "GFSL96_00", + "name": "Creality Generic PLA Silk @Ender-3V3-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @Ender-3V3-all", + "filament_max_volumetric_speed": ["7.5"], + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", + "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", + "Creality Ender-3 V3 KE 0.4 nozzle", + "Creality Ender-3 V3 0.4 nozzle", + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Hi-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Hi-all.json new file mode 100644 index 0000000..dfb79cb --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @Hi-all.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "setting_id": "GFSL96_00", + "name": "Creality Generic PLA Silk @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @Hi-all", + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "7.5" + ], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K1-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K1-all.json new file mode 100644 index 0000000..2c4c848 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K1-all.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "setting_id": "GFSL96_00", + "name": "Creality Generic PLA Silk @K1-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @K1-all", + "filament_max_volumetric_speed": [ + "7.5" + ], + "compatible_printers": [ + "Creality K1 (0.4 nozzle)", + "Creality K1 (0.6 nozzle)", + "Creality K1 (0.8 nozzle)", + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle", + "Creality K1 SE 0.4 nozzle", + "Creality K1 Max (0.4 nozzle)", + "Creality K1 Max (0.6 nozzle)", + "Creality K1 Max (0.8 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K2-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K2-all.json new file mode 100644 index 0000000..4f3c356 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Silk @K2-all.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "setting_id": "GFSL96_00", + "name": "Creality Generic PLA Silk @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @K2-all", + "filament_max_volumetric_speed": [ + "10" + ], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Wood @Hi-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Wood @Hi-all.json new file mode 100644 index 0000000..fdabf19 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA Wood @Hi-all.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "setting_id": "GFSL96_00", + "name": "Creality Generic PLA Wood @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @Hi-all", + "filament_flow_ratio": [ + "0.88" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @Hi-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @Hi-all.json new file mode 100644 index 0000000..96712a3 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @Hi-all.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "setting_id": "GFSL96_00", + "name": "Creality Generic PLA-CF @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA-CF", + "filament_max_volumetric_speed": [ + "18" + ], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K1-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K1-all.json new file mode 100644 index 0000000..d620e43 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K1-all.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "setting_id": "GFSL96_00", + "name": "Creality Generic PLA-CF @K1-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA-CF", + "additional_cooling_fan_speed": [ + "0" + ], + "compatible_printers": [ + "Creality K1 (0.4 nozzle)", + "Creality K1 (0.6 nozzle)", + "Creality K1 (0.8 nozzle)", + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle", + "Creality K1 SE 0.4 nozzle", + "Creality K1 Max (0.4 nozzle)", + "Creality K1 Max (0.6 nozzle)", + "Creality K1 Max (0.8 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K2-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K2-all.json new file mode 100644 index 0000000..e76726a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF @K2-all.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "setting_id": "GFSL96_00", + "name": "Creality Generic PLA-CF @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA-CF", + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_layer_time": [ + "8" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF.json new file mode 100644 index 0000000..dae1cfc --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA-CF.json @@ -0,0 +1,60 @@ +{ + "type": "filament", + "filament_id": "GFL98", + "name": "Creality Generic PLA-CF", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": [ + "0.95" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "slow_down_layer_time": [ + "7" + ], + "filament_cost": [ + "30" + ], + "compatible_printers": [ + "Creality CR-10 V2 0.4 nozzle", + "Creality CR-10 Max 0.4 nozzle", + "Creality CR-6 SE 0.2 nozzle", + "Creality CR-6 SE 0.4 nozzle", + "Creality CR-6 SE 0.6 nozzle", + "Creality CR-6 SE 0.8 nozzle", + "Creality CR-6 Max 0.2 nozzle", + "Creality CR-6 Max 0.4 nozzle", + "Creality CR-6 Max 0.6 nozzle", + "Creality CR-6 Max 0.8 nozzle", + "Creality Ender-3 0.2 nozzle", + "Creality Ender-3 0.4 nozzle", + "Creality Ender-3 0.6 nozzle", + "Creality Ender-3 0.8 nozzle", + "Creality Ender-3 Pro 0.2 nozzle", + "Creality Ender-3 Pro 0.4 nozzle", + "Creality Ender-3 Pro 0.6 nozzle", + "Creality Ender-3 Pro 0.8 nozzle", + "Creality Ender-3 V2 0.4 nozzle", + "Creality Ender-3 V2 Neo 0.4 nozzle", + "Creality Ender-3 S1 0.4 nozzle", + "Creality Ender-3 S1 Pro 0.4 nozzle", + "Creality Ender-5 0.4 nozzle", + "Creality Ender-5 Plus 0.4 nozzle", + "Creality Ender-5 Pro (2019) 0.2 nozzle", + "Creality Ender-5 Pro (2019) 0.25 nozzle", + "Creality Ender-5 Pro (2019) 0.3 nozzle", + "Creality Ender-5 Pro (2019) 0.4 nozzle", + "Creality Ender-5 Pro (2019) 0.5 nozzle", + "Creality Ender-5 Pro (2019) 0.6 nozzle", + "Creality Ender-5 Pro (2019) 0.8 nozzle", + "Creality Ender-5 Pro (2019) 1.0 nozzle", + "Creality Ender-5S 0.4 nozzle", + "Creality Ender-5 S1 0.4 nozzle", + "Creality Ender-6 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA.json new file mode 100644 index 0000000..a81b71a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic PLA.json @@ -0,0 +1,65 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSA04", + "name": "Creality Generic PLA", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": ["0.98"], + "filament_max_volumetric_speed": ["12"], + "slow_down_layer_time": ["8"], + "compatible_printers": [ + "Creality CR-10 V2 0.4 nozzle", + "Creality CR-10 Max 0.4 nozzle", + "Creality CR-6 SE 0.2 nozzle", + "Creality CR-6 SE 0.4 nozzle", + "Creality CR-6 SE 0.6 nozzle", + "Creality CR-6 SE 0.8 nozzle", + "Creality CR-6 Max 0.2 nozzle", + "Creality CR-6 Max 0.4 nozzle", + "Creality CR-6 Max 0.6 nozzle", + "Creality CR-6 Max 0.8 nozzle", + "Creality Sermoon V1 0.4 nozzle", + "Creality Ender-3 0.2 nozzle", + "Creality Ender-3 0.4 nozzle", + "Creality Ender-3 0.6 nozzle", + "Creality Ender-3 0.8 nozzle", + "Creality Ender-3 Pro 0.2 nozzle", + "Creality Ender-3 Pro 0.4 nozzle", + "Creality Ender-3 Pro 0.6 nozzle", + "Creality Ender-3 Pro 0.8 nozzle", + "Creality Ender-3 V2 0.4 nozzle", + "Creality Ender-3 V2 Neo 0.4 nozzle", + "Creality Ender-3 S1 0.4 nozzle", + "Creality Ender-3 S1 Pro 0.4 nozzle", + "Creality Ender-3 S1 Plus 0.2 nozzle", + "Creality Ender-3 S1 Plus 0.4 nozzle", + "Creality Ender-3 S1 Plus 0.6 nozzle", + "Creality Ender-3 S1 Plus 0.8 nozzle", + "Creality Ender-5 0.4 nozzle", + "Creality Ender-5 Plus 0.4 nozzle", + "Creality Ender-5 Pro (2019) 0.2 nozzle", + "Creality Ender-5 Pro (2019) 0.25 nozzle", + "Creality Ender-5 Pro (2019) 0.3 nozzle", + "Creality Ender-5 Pro (2019) 0.4 nozzle", + "Creality Ender-5 Pro (2019) 0.5 nozzle", + "Creality Ender-5 Pro (2019) 0.6 nozzle", + "Creality Ender-5 Pro (2019) 0.8 nozzle", + "Creality Ender-5 Pro (2019) 1.0 nozzle", + "Creality Ender-5S 0.4 nozzle", + "Creality Ender-5 S1 0.4 nozzle", + "Creality Ender-6 0.4 nozzle", + "Creality K1 (0.4 nozzle)", + "Creality K1 (0.6 nozzle)", + "Creality K1 (0.8 nozzle)", + "Creality K1 Max (0.4 nozzle)", + "Creality K1 Max (0.6 nozzle)", + "Creality K1 Max (0.8 nozzle)", + "Creality CR-10 SE 0.2 nozzle", + "Creality CR-10 SE 0.4 nozzle", + "Creality CR-10 SE 0.6 nozzle", + "Creality CR-10 SE 0.8 nozzle", + "Creality CR-M4 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-3V3-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-3V3-all.json new file mode 100644 index 0000000..a776cc8 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-3V3-all.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "setting_id": "GFU99_CREALITY_00", + "name": "Creality Generic TPU @Ender-3V3-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic TPU", + "hot_plate_temp": ["30"], + "hot_plate_temp_initial_layer": ["30"], + "textured_plate_temp": ["30"], + "textured_plate_temp_initial_layer": ["30"], + "nozzle_temperature_initial_layer": ["230"], + "nozzle_temperature": ["230"], + "filament_max_volumetric_speed": ["3.5"], + "slow_down_layer_time": ["5"], + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", + "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", + "Creality Ender-3 V3 KE 0.4 nozzle", + "Creality Ender-3 V3 0.4 nozzle", + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-5Max-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-5Max-all.json new file mode 100644 index 0000000..6609e30 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Ender-5Max-all.json @@ -0,0 +1,99 @@ +{ + "type": "filament", + "filament_id": "10001", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Generic TPU @Ender-5Max-all", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_common", + "activate_air_filtration": "0", + "activate_chamber_temp_control": "0", + "additional_cooling_fan_speed": "0", + "chamber_temperature": "35", + "close_fan_the_first_x_layers": "1", + "compatible_printers": [ + "Creality Ender-5 Max 0.4 nozzle" + ], + "complete_print_exhaust_fan_speed": "80", + "cool_plate_temp": "45", + "cool_plate_temp_initial_layer": "45", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "during_print_exhaust_fan_speed": "60", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "eng_plate_temp": "35", + "eng_plate_temp_initial_layer": "35", + "fan_cooling_layer_time": "100", + "fan_max_speed": "100", + "fan_min_speed": "100", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_cost": "20", + "filament_density": "1.26", + "filament_deretraction_speed": "30", + "filament_diameter": "1.75", + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": "1", + "filament_is_support": "0", + "filament_load_time": "0", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_max_volumetric_speed": "2", + "filament_minimal_purge_on_wipe_tower": "15", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_before_wipe": "nil", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_retract_restart_extra": "nil", + "filament_retract_when_changing_layer": "nil", + "filament_retraction_length": "3", + "filament_retraction_minimum_travel": "nil", + "filament_retraction_speed": "30", + "filament_shrink": "100%", + "filament_soluble": "0", + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_toolchange_delay": "0", + "filament_type": [ + "TPU" + ], + "filament_unload_time": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "filament_vendor": [ + "Creality" + ], + "filament_wipe": "nil", + "filament_wipe_distance": "nil", + "filament_z_hop": "nil", + "filament_z_hop_types": "nil", + "full_fan_speed_layer": "0", + "hot_plate_temp": "45", + "hot_plate_temp_initial_layer": "45", + "nozzle_temperature": "195", + "nozzle_temperature_initial_layer": "195", + "nozzle_temperature_range_high": "220", + "nozzle_temperature_range_low": "200", + "overhang_fan_speed": "100", + "overhang_fan_threshold": "50%", + "pressure_advance": "0.02", + "reduce_fan_stop_start_freq": "1", + "required_nozzle_HRC": "0", + "slow_down_for_layer_cooling": "1", + "slow_down_layer_time": "8", + "slow_down_min_speed": "5", + "support_material_interface_fan_speed": "-1", + "temperature_vitrification": "60", + "textured_plate_temp": "45", + "textured_plate_temp_initial_layer": "45" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Hi-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Hi-all.json new file mode 100644 index 0000000..f98b6f6 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @Hi-all.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "setting_id": "GFU99_CREALITY_00", + "name": "Creality Generic TPU @Hi-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic TPU", + "hot_plate_temp": [ + "30" + ], + "hot_plate_temp_initial_layer": [ + "30" + ], + "textured_plate_temp": [ + "30" + ], + "textured_plate_temp_initial_layer": [ + "30" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature": [ + "230" + ], + "filament_max_volumetric_speed": [ + "3.5" + ], + "slow_down_layer_time": [ + "5" + ], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n"], + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @K1-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @K1-all.json new file mode 100644 index 0000000..48c4d40 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @K1-all.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "setting_id": "GFU99_CREALITY_00", + "name": "Creality Generic TPU @K1-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic TPU", + "hot_plate_temp": [ + "30" + ], + "hot_plate_temp_initial_layer": [ + "30" + ], + "textured_plate_temp": [ + "30" + ], + "textured_plate_temp_initial_layer": [ + "30" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature": [ + "230" + ], + "filament_max_volumetric_speed": [ + "3.5" + ], + "slow_down_layer_time": [ + "5" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "compatible_printers": [ + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle", + "Creality K1 SE 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @K2-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @K2-all.json new file mode 100644 index 0000000..1c0d417 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU @K2-all.json @@ -0,0 +1,42 @@ +{ + "type": "filament", + "setting_id": "GFU99_CREALITY_00", + "name": "Creality Generic TPU @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic TPU", + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature": [ + "220" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "slow_down_layer_time": [ + "8" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU.json b/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU.json new file mode 100644 index 0000000..497c9fa --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Generic TPU.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "filament_id": "GFU99", + "setting_id": "GFSA04", + "name": "Creality Generic TPU", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_tpu", + "filament_max_volumetric_speed": [ + "3.2" + ], + "compatible_printers": [ + "Creality K1 (0.4 nozzle)", + "Creality K1 (0.6 nozzle)", + "Creality K1 (0.8 nozzle)", + "Creality K1 Max (0.4 nozzle)", + "Creality K1 Max (0.6 nozzle)", + "Creality K1 Max (0.8 nozzle)", + "Creality Sermoon V1 0.4 nozzle", + "Creality CR-10 SE 0.2 nozzle", + "Creality CR-10 SE 0.4 nozzle", + "Creality CR-10 SE 0.6 nozzle", + "Creality CR-10 SE 0.8 nozzle", + "Creality Ender-3 S1 Pro 0.4 nozzle", + "Creality Ender-3 S1 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality HF Generic PLA.json b/.config/OrcaSlicer/system/Creality/filament/Creality HF Generic PLA.json new file mode 100644 index 0000000..8fa92dc --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality HF Generic PLA.json @@ -0,0 +1,33 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSA04", + "name": "Creality HF Generic PLA", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Creality K1 (0.4 nozzle)", + "Creality K1 (0.6 nozzle)", + "Creality K1 (0.8 nozzle)", + "Creality K1 Max (0.4 nozzle)", + "Creality K1 Max (0.6 nozzle)", + "Creality K1 Max (0.8 nozzle)", + "Creality CR-10 SE 0.2 nozzle", + "Creality CR-10 SE 0.4 nozzle", + "Creality CR-10 SE 0.6 nozzle", + "Creality CR-10 SE 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality HF Generic Speed PLA.json b/.config/OrcaSlicer/system/Creality/filament/Creality HF Generic Speed PLA.json new file mode 100644 index 0000000..ba95e7d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality HF Generic Speed PLA.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSA04", + "name": "Creality HF Generic Speed PLA", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": ["0.98"], + "filament_max_volumetric_speed": ["23"], + "slow_down_layer_time": ["5"], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Creality K1 (0.4 nozzle)", + "Creality K1 (0.6 nozzle)", + "Creality K1 (0.8 nozzle)", + "Creality K1 Max (0.4 nozzle)", + "Creality K1 Max (0.6 nozzle)", + "Creality K1 Max (0.8 nozzle)", + "Creality CR-10 SE 0.2 nozzle", + "Creality CR-10 SE 0.4 nozzle", + "Creality CR-10 SE 0.6 nozzle", + "Creality CR-10 SE 0.8 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json new file mode 100644 index 0000000..7608651 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json @@ -0,0 +1,99 @@ +{ + "type": "filament", + "filament_id": "03001", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Hyper ABS @Ender-5Max-all", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_common", + "activate_air_filtration": "0", + "activate_chamber_temp_control": "0", + "additional_cooling_fan_speed": "0", + "chamber_temperature": "35", + "close_fan_the_first_x_layers": "3", + "compatible_printers": [ + "Creality Ender-5 Max 0.4 nozzle" + ], + "complete_print_exhaust_fan_speed": "80", + "cool_plate_temp": "90", + "cool_plate_temp_initial_layer": "90", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "during_print_exhaust_fan_speed": "60", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "eng_plate_temp": "105", + "eng_plate_temp_initial_layer": "105", + "fan_cooling_layer_time": "30", + "fan_max_speed": "20", + "fan_min_speed": "20", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_cost": "15", + "filament_density": "1.08", + "filament_deretraction_speed": "nil", + "filament_diameter": "1.75", + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": "0.92", + "filament_is_support": "0", + "filament_load_time": "0", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_max_volumetric_speed": "60", + "filament_minimal_purge_on_wipe_tower": "15", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_before_wipe": "nil", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_retract_restart_extra": "0", + "filament_retract_when_changing_layer": "nil", + "filament_retraction_length": "nil", + "filament_retraction_minimum_travel": "nil", + "filament_retraction_speed": "nil", + "filament_shrink": "100%", + "filament_soluble": "0", + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "filament_toolchange_delay": "0", + "filament_type": [ + "ABS" + ], + "filament_unload_time": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "filament_vendor": [ + "Creality" + ], + "filament_wipe": "nil", + "filament_wipe_distance": "nil", + "filament_z_hop": "nil", + "filament_z_hop_types": "nil", + "full_fan_speed_layer": "0", + "hot_plate_temp": "90", + "hot_plate_temp_initial_layer": "90", + "nozzle_temperature": "260", + "nozzle_temperature_initial_layer": "260", + "nozzle_temperature_range_high": "260", + "nozzle_temperature_range_low": "230", + "overhang_fan_speed": "20", + "overhang_fan_threshold": "25%", + "pressure_advance": "0.025", + "reduce_fan_stop_start_freq": "1", + "required_nozzle_HRC": "0", + "slow_down_for_layer_cooling": "1", + "slow_down_layer_time": "5", + "slow_down_min_speed": "10", + "support_material_interface_fan_speed": "-1", + "temperature_vitrification": "110", + "textured_plate_temp": "90", + "textured_plate_temp_initial_layer": "90" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json new file mode 100644 index 0000000..fc03414 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json @@ -0,0 +1,100 @@ +{ + "type": "filament", + "filament_id": "01001", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Hyper PLA @Ender-5Max-all", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_common", + "activate_air_filtration": "0", + "activate_chamber_temp_control": "0", + "additional_cooling_fan_speed": "0", + "chamber_temperature": "0", + "close_fan_the_first_x_layers": "1", + "compatible_printers": [ + "Creality Ender-5 Max 0.4 nozzle" + ], + "complete_print_exhaust_fan_speed": "80", + "cool_plate_temp": "45", + "cool_plate_temp_initial_layer": "45", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "during_print_exhaust_fan_speed": "60", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "eng_plate_temp": "50", + "eng_plate_temp_initial_layer": "50", + "fan_cooling_layer_time": "100", + "fan_max_speed": "100", + "fan_min_speed": "100", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_cost": "30", + "filament_density": "1.24", + "filament_deretraction_speed": "nil", + "filament_diameter": "1.75", + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": "0.97", + "filament_is_support": "0", + "filament_load_time": "0", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_max_volumetric_speed": "50", + "filament_minimal_purge_on_wipe_tower": "15", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_before_wipe": "nil", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_retract_restart_extra": "nil", + "filament_retract_when_changing_layer": "nil", + "filament_retraction_length": "nil", + "filament_retraction_minimum_travel": "nil", + "filament_retraction_speed": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_soluble": "0", + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_toolchange_delay": "0", + "filament_type": [ + "PLA" + ], + "filament_unload_time": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "filament_vendor": [ + "Creality" + ], + "filament_wipe": "nil", + "filament_wipe_distance": "nil", + "filament_z_hop": "nil", + "filament_z_hop_types": "nil", + "full_fan_speed_layer": "0", + "hot_plate_temp": "45", + "hot_plate_temp_initial_layer": "45", + "nozzle_temperature": "220", + "nozzle_temperature_initial_layer": "220", + "nozzle_temperature_range_high": "240", + "nozzle_temperature_range_low": "190", + "overhang_fan_speed": "100", + "overhang_fan_threshold": "50%", + "pressure_advance": "0.04", + "reduce_fan_stop_start_freq": "1", + "required_nozzle_HRC": "0", + "slow_down_for_layer_cooling": "1", + "slow_down_layer_time": "5", + "slow_down_min_speed": "20", + "support_material_interface_fan_speed": "-1", + "temperature_vitrification": "60", + "textured_plate_temp": "45", + "textured_plate_temp_initial_layer": "45" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json new file mode 100644 index 0000000..cf0507c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json @@ -0,0 +1,99 @@ +{ + "type": "filament", + "filament_id": "02001", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Hyper PLA-CF @Ender-5Max-all", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_common", + "activate_air_filtration": "0", + "activate_chamber_temp_control": "0", + "additional_cooling_fan_speed": "0", + "chamber_temperature": "35", + "close_fan_the_first_x_layers": "1", + "compatible_printers": [ + "Creality Ender-5 Max 0.4 nozzle" + ], + "complete_print_exhaust_fan_speed": "80", + "cool_plate_temp": "45", + "cool_plate_temp_initial_layer": "45", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "during_print_exhaust_fan_speed": "60", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "eng_plate_temp": "50", + "eng_plate_temp_initial_layer": "50", + "fan_cooling_layer_time": "100", + "fan_max_speed": "100", + "fan_min_speed": "100", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_cost": "32", + "filament_density": "1.27", + "filament_deretraction_speed": "nil", + "filament_diameter": "1.75", + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": "0.9", + "filament_is_support": "0", + "filament_load_time": "0", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_max_volumetric_speed": "40", + "filament_minimal_purge_on_wipe_tower": "15", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_before_wipe": "nil", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_retract_restart_extra": "nil", + "filament_retract_when_changing_layer": "nil", + "filament_retraction_length": "nil", + "filament_retraction_minimum_travel": "nil", + "filament_retraction_speed": "nil", + "filament_shrink": "100%", + "filament_soluble": "0", + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_toolchange_delay": "0", + "filament_type": [ + "PLA-CF" + ], + "filament_unload_time": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "filament_vendor": [ + "Creality" + ], + "filament_wipe": "nil", + "filament_wipe_distance": "nil", + "filament_z_hop": "nil", + "filament_z_hop_types": "nil", + "full_fan_speed_layer": "0", + "hot_plate_temp": "45", + "hot_plate_temp_initial_layer": "45", + "nozzle_temperature": "220", + "nozzle_temperature_initial_layer": "220", + "nozzle_temperature_range_high": "240", + "nozzle_temperature_range_low": "190", + "overhang_fan_speed": "100", + "overhang_fan_threshold": "50%", + "pressure_advance": "0.035", + "reduce_fan_stop_start_freq": "1", + "required_nozzle_HRC": "0", + "slow_down_for_layer_cooling": "1", + "slow_down_layer_time": "5", + "slow_down_min_speed": "10", + "support_material_interface_fan_speed": "-1", + "temperature_vitrification": "60", + "textured_plate_temp": "45", + "textured_plate_temp_initial_layer": "45" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/Creality Silk PLA @Ender-5Max-all.json b/.config/OrcaSlicer/system/Creality/filament/Creality Silk PLA @Ender-5Max-all.json new file mode 100644 index 0000000..300a7f0 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/Creality Silk PLA @Ender-5Max-all.json @@ -0,0 +1,99 @@ +{ + "type": "filament", + "filament_id": "05001", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Silk PLA @Ender-5Max-all", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_common", + "activate_air_filtration": "0", + "activate_chamber_temp_control": "0", + "additional_cooling_fan_speed": "0", + "chamber_temperature": "35", + "close_fan_the_first_x_layers": "1", + "compatible_printers": [ + "Creality Ender-5 Max 0.4 nozzle" + ], + "complete_print_exhaust_fan_speed": "80", + "cool_plate_temp": "45", + "cool_plate_temp_initial_layer": "45", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "during_print_exhaust_fan_speed": "60", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "eng_plate_temp": "50", + "eng_plate_temp_initial_layer": "50", + "fan_cooling_layer_time": "100", + "fan_max_speed": "100", + "fan_min_speed": "100", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_cost": "22", + "filament_density": "1.25", + "filament_deretraction_speed": "nil", + "filament_diameter": "1.75", + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": "0.85", + "filament_is_support": "0", + "filament_load_time": "0", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_max_volumetric_speed": "20", + "filament_minimal_purge_on_wipe_tower": "15", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_before_wipe": "nil", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_retract_restart_extra": "nil", + "filament_retract_when_changing_layer": "nil", + "filament_retraction_length": "nil", + "filament_retraction_minimum_travel": "nil", + "filament_retraction_speed": "nil", + "filament_shrink": "100%", + "filament_soluble": "0", + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_toolchange_delay": "0", + "filament_type": [ + "PLA" + ], + "filament_unload_time": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "filament_vendor": [ + "Creality" + ], + "filament_wipe": "nil", + "filament_wipe_distance": "nil", + "filament_z_hop": "nil", + "filament_z_hop_types": "nil", + "full_fan_speed_layer": "0", + "hot_plate_temp": "45", + "hot_plate_temp_initial_layer": "45", + "nozzle_temperature": "230", + "nozzle_temperature_initial_layer": "230", + "nozzle_temperature_range_high": "240", + "nozzle_temperature_range_low": "190", + "overhang_fan_speed": "100", + "overhang_fan_threshold": "50%", + "pressure_advance": "0.02", + "reduce_fan_stop_start_freq": "1", + "required_nozzle_HRC": "0", + "slow_down_for_layer_cooling": "1", + "slow_down_layer_time": "5", + "slow_down_min_speed": "10", + "support_material_interface_fan_speed": "-1", + "temperature_vitrification": "60", + "textured_plate_temp": "45", + "textured_plate_temp_initial_layer": "45" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/fdm_filament_abs.json b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_abs.json new file mode 100644 index 0000000..b9d4eed --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_abs.json @@ -0,0 +1,88 @@ +{ + "type": "filament", + "name": "fdm_filament_abs", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common", + "cool_plate_temp" : [ + "105" + ], + "eng_plate_temp" : [ + "105" + ], + "hot_plate_temp" : [ + "105" + ], + "textured_plate_temp" : [ + "105" + ], + "cool_plate_temp_initial_layer" : [ + "105" + ], + "eng_plate_temp_initial_layer" : [ + "105" + ], + "hot_plate_temp_initial_layer" : [ + "105" + ], + "textured_plate_temp_initial_layer" : [ + "105" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_max_volumetric_speed": [ + "28.6" + ], + "filament_type": [ + "ABS" + ], + "filament_density": [ + "1.04" + ], + "filament_cost": [ + "20" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "25%" + ], + "overhang_fan_speed": [ + "80" + ], + "nozzle_temperature": [ + "260" + ], + "temperature_vitrification": [ + "110" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "3" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/filament/fdm_filament_asa.json b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_asa.json new file mode 100644 index 0000000..050d1c2 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_asa.json @@ -0,0 +1,85 @@ +{ + "type": "filament", + "name": "fdm_filament_asa", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common", + "cool_plate_temp" : [ + "105" + ], + "eng_plate_temp" : [ + "105" + ], + "hot_plate_temp" : [ + "105" + ], + "textured_plate_temp" : [ + "100" + ], + "cool_plate_temp_initial_layer" : [ + "105" + ], + "eng_plate_temp_initial_layer" : [ + "105" + ], + "hot_plate_temp_initial_layer" : [ + "105" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "35" + ], + "filament_max_volumetric_speed": [ + "28.6" + ], + "filament_type": [ + "ASA" + ], + "filament_density": [ + "1.04" + ], + "filament_cost": [ + "20" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "25%" + ], + "overhang_fan_speed": [ + "80" + ], + "nozzle_temperature": [ + "260" + ], + "temperature_vitrification": [ + "110" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "3" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/filament/fdm_filament_common.json b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_common.json new file mode 100644 index 0000000..9f77975 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_common.json @@ -0,0 +1,144 @@ +{ + "type": "filament", + "name": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "cool_plate_temp" : [ + "60" + ], + "eng_plate_temp" : [ + "60" + ], + "hot_plate_temp" : [ + "60" + ], + "textured_plate_temp" : [ + "60" + ], + "cool_plate_temp_initial_layer" : [ + "60" + ], + "eng_plate_temp_initial_layer" : [ + "60" + ], + "hot_plate_temp_initial_layer" : [ + "60" + ], + "textured_plate_temp_initial_layer" : [ + "60" + ], + "overhang_fan_threshold": [ + "95%" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "1" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "fan_cooling_layer_time": [ + "60" + ], + "filament_cost": [ + "0" + ], + "filament_density": [ + "0" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_max_volumetric_speed": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_settings_id": [ + "" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "bed_type": [ + "Cool Plate" + ], + "nozzle_temperature_initial_layer": [ + "200" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "35" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "nozzle_temperature": [ + "200" + ], + "temperature_vitrification": [ + "100" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/filament/fdm_filament_pa.json b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_pa.json new file mode 100644 index 0000000..1cd78ec --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_pa.json @@ -0,0 +1,82 @@ +{ + "type": "filament", + "name": "fdm_filament_pa", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "activate_air_filtration": [ + "1" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "4" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "PA" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "30" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "108" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/fdm_filament_pc.json b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_pc.json new file mode 100644 index 0000000..5729114 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_pc.json @@ -0,0 +1,82 @@ +{ + "type": "filament", + "name": "fdm_filament_pc", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "eng_plate_temp": [ + "110" + ], + "hot_plate_temp": [ + "110" + ], + "textured_plate_temp": [ + "110" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_max_volumetric_speed": [ + "23.2" + ], + "filament_type": [ + "PC" + ], + "filament_density": [ + "1.04" + ], + "filament_cost": [ + "20" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "25%" + ], + "overhang_fan_speed": [ + "60" + ], + "nozzle_temperature": [ + "280" + ], + "temperature_vitrification": [ + "120" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "2" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/filament/fdm_filament_pet.json b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_pet.json new file mode 100644 index 0000000..2cbef62 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_pet.json @@ -0,0 +1,82 @@ +{ + "type": "filament", + "name": "fdm_filament_pet", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common", + "cool_plate_temp" : [ + "60" + ], + "eng_plate_temp" : [ + "0" + ], + "hot_plate_temp" : [ + "80" + ], + "textured_plate_temp" : [ + "80" + ], + "cool_plate_temp_initial_layer" : [ + "60" + ], + "eng_plate_temp_initial_layer" : [ + "0" + ], + "hot_plate_temp_initial_layer" : [ + "80" + ], + "textured_plate_temp_initial_layer" : [ + "80" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "20" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_type": [ + "PETG" + ], + "filament_density": [ + "1.27" + ], + "filament_cost": [ + "30" + ], + "nozzle_temperature_initial_layer": [ + "255" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "20" + ], + "overhang_fan_speed": [ + "100" + ], + "nozzle_temperature": [ + "255" + ], + "temperature_vitrification": [ + "80" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/filament/fdm_filament_pla.json b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_pla.json new file mode 100644 index 0000000..82c6772 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_pla.json @@ -0,0 +1,94 @@ +{ + "type": "filament", + "name": "fdm_filament_pla", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common", + "fan_cooling_layer_time": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PLA" + ], + "filament_density": [ + "1.24" + ], + "filament_cost": [ + "20" + ], + "cool_plate_temp" : [ + "60" + ], + "eng_plate_temp" : [ + "60" + ], + "hot_plate_temp" : [ + "60" + ], + "textured_plate_temp" : [ + "60" + ], + "cool_plate_temp_initial_layer" : [ + "60" + ], + "eng_plate_temp_initial_layer" : [ + "60" + ], + "hot_plate_temp_initial_layer" : [ + "60" + ], + "textured_plate_temp_initial_layer" : [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "nozzle_temperature": [ + "220" + ], + "temperature_vitrification": [ + "60" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "4" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/filament/fdm_filament_tpu.json b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_tpu.json new file mode 100644 index 0000000..d5cc57f --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/filament/fdm_filament_tpu.json @@ -0,0 +1,82 @@ +{ + "type": "filament", + "name": "fdm_filament_tpu", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common", + "cool_plate_temp" : [ + "30" + ], + "eng_plate_temp" : [ + "30" + ], + "hot_plate_temp" : [ + "35" + ], + "cool_plate_temp_initial_layer" : [ + "30" + ], + "eng_plate_temp_initial_layer" : [ + "30" + ], + "hot_plate_temp_initial_layer" : [ + "35" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_type": [ + "TPU" + ], + "filament_density": [ + "1.24" + ], + "filament_cost": [ + "20" + ], + "filament_retraction_length": [ + "0.4" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "nozzle_temperature": [ + "240" + ], + "temperature_vitrification": [ + "60" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 Max 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 Max 0.4 nozzle.json new file mode 100644 index 0000000..b1fb9bf --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 Max 0.4 nozzle.json @@ -0,0 +1,26 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality CR-10 Max 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-10 Max", + "printer_structure": "i3", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "default_print_profile": "0.20mm Standard @Creality CR10Max", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "450x0", + "450x450", + "0x450" + ], + "printable_height": "470", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 Max.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 Max.json new file mode 100644 index 0000000..1a49a81 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 Max.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality CR-10 Max", + "model_id": "Creality_CR-10_Max", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_cr10max_buildplate_model.stl", + "bed_texture": "creality_cr10max_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.2 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.2 nozzle.json new file mode 100644 index 0000000..4911adf --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.2 nozzle.json @@ -0,0 +1,128 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality CR-10 SE 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-10 SE", + "printer_variant": "0.2", + "printer_structure": "i3", + "gcode_flavor": "klipper", + "default_print_profile": "0.20mm Standard @Creality CR10SE 0.2", + "nozzle_diameter": [ + "0.2" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "265", + "extruder_clearance_height_to_rod": "36", + "extruder_clearance_height_to_lid": "140", + "extruder_clearance_radius": "65", + "nozzle_type": "hardened_steel", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "5000", + "5000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "8000", + "8000" + ], + "machine_max_acceleration_y": [ + "8000", + "8000" + ], + "machine_max_acceleration_z": [ + "500", + "200" + ], + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "600", + "600" + ], + "machine_max_speed_y": [ + "600", + "600" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "10", + "10" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.16" + ], + "min_layer_height": [ + "0.04" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.8" + ], + "retract_length_toolchange": [ + "2" + ], + "retraction_speed": [ + "30" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z", + "scan_first_layer": "0", + "thumbnails": [ + "96x96", + "300x300" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.4 nozzle.json new file mode 100644 index 0000000..6214d68 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.4 nozzle.json @@ -0,0 +1,128 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality CR-10 SE 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-10 SE", + "printer_variant": "0.4", + "printer_structure": "i3", + "gcode_flavor": "klipper", + "default_print_profile": "0.20mm Standard @Creality CR10SE 0.4", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "265", + "extruder_clearance_height_to_rod": "36", + "extruder_clearance_height_to_lid": "140", + "extruder_clearance_radius": "65", + "nozzle_type": "hardened_steel", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "5000", + "5000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "8000", + "8000" + ], + "machine_max_acceleration_y": [ + "8000", + "8000" + ], + "machine_max_acceleration_z": [ + "500", + "200" + ], + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "600", + "600" + ], + "machine_max_speed_y": [ + "600", + "600" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "10", + "10" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.8" + ], + "retract_length_toolchange": [ + "2" + ], + "retraction_speed": [ + "30" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z", + "scan_first_layer": "0", + "thumbnails": [ + "96x96", + "300x300" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.6 nozzle.json new file mode 100644 index 0000000..fbcb5d3 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.6 nozzle.json @@ -0,0 +1,128 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality CR-10 SE 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-10 SE", + "printer_variant": "0.6", + "printer_structure": "i3", + "gcode_flavor": "klipper", + "default_print_profile": "0.20mm Standard @Creality CR10SE 0.6", + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "265", + "extruder_clearance_height_to_rod": "36", + "extruder_clearance_height_to_lid": "140", + "extruder_clearance_radius": "65", + "nozzle_type": "hardened_steel", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "5000", + "5000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "8000", + "8000" + ], + "machine_max_acceleration_y": [ + "8000", + "8000" + ], + "machine_max_acceleration_z": [ + "500", + "200" + ], + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "600", + "600" + ], + "machine_max_speed_y": [ + "600", + "600" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "10", + "10" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.48" + ], + "min_layer_height": [ + "0.12" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.8" + ], + "retract_length_toolchange": [ + "2" + ], + "retraction_speed": [ + "30" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z", + "scan_first_layer": "0", + "thumbnails": [ + "96x96", + "300x300" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.8 nozzle.json new file mode 100644 index 0000000..71fa0f5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE 0.8 nozzle.json @@ -0,0 +1,128 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality CR-10 SE 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-10 SE", + "printer_variant": "0.8", + "printer_structure": "i3", + "gcode_flavor": "klipper", + "default_print_profile": "0.20mm Standard @Creality CR10SE 0.8", + "nozzle_diameter": [ + "0.8" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "265", + "extruder_clearance_height_to_rod": "36", + "extruder_clearance_height_to_lid": "140", + "extruder_clearance_radius": "65", + "nozzle_type": "hardened_steel", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "5000", + "5000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "8000", + "8000" + ], + "machine_max_acceleration_y": [ + "8000", + "8000" + ], + "machine_max_acceleration_z": [ + "500", + "200" + ], + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "600", + "600" + ], + "machine_max_speed_y": [ + "600", + "600" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "10", + "10" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.64" + ], + "min_layer_height": [ + "0.16" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.8" + ], + "retract_length_toolchange": [ + "2" + ], + "retraction_speed": [ + "30" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z", + "scan_first_layer": "0", + "thumbnails": [ + "96x96", + "300x300" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE.json new file mode 100644 index 0000000..842d0da --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 SE.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality CR-10 SE", + "model_id": "Creality-CR-10SE", + "nozzle_diameter": "0.2;0.4;0.6;0.8", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_cr10se_buildplate_model.stl", + "bed_texture": "creality_cr10se_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PETG;Creality Generic TPU;Creality Generic ABS" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 V2 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 V2 0.4 nozzle.json new file mode 100644 index 0000000..85e5ff8 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 V2 0.4 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality CR-10 V2 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-10 V2", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality CR10V2", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "400", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.36" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "1" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M0", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 V2.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 V2.json new file mode 100644 index 0000000..1fde243 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-10 V2.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality CR-10 V2", + "model_id": "Creality-CR10-V2", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_cr10v2_buildplate_model.stl", + "bed_texture": "creality_cr10v2_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.2 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.2 nozzle.json new file mode 100644 index 0000000..9d43551 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.2 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality CR-6 Max 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-6 Max", + "printer_structure": "i3", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "printer_variant": "0.2", + "default_print_profile": "0.16mm Opitmal @Creality CR-6 0.2", + "nozzle_diameter": [ + "0.2" + ], + "printable_area": [ + "5x5", + "395x5", + "395x395", + "5x395" + ], + "printable_height": "400", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.4 nozzle.json new file mode 100644 index 0000000..c726a9b --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.4 nozzle.json @@ -0,0 +1,26 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality CR-6 Max 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-6 Max", + "printer_structure": "i3", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "default_print_profile": "0.20mm Standard @Creality CR-6 0.4", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "5x5", + "395x5", + "395x395", + "5x395" + ], + "printable_height": "400", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.6 nozzle.json new file mode 100644 index 0000000..5d70115 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.6 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality CR-6 Max 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-6 Max", + "printer_structure": "i3", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "printer_variant": "0.6", + "default_print_profile": "0.20mm Standard @Creality CR-6 0.6", + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "5x5", + "395x5", + "395x395", + "5x395" + ], + "printable_height": "400", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.8 nozzle.json new file mode 100644 index 0000000..ec44372 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max 0.8 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality CR-6 Max 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-6 Max", + "printer_structure": "i3", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "printer_variant": "0.8", + "default_print_profile": "0.32mm Standard @Creality CR-6 0.8", + "nozzle_diameter": [ + "0.8" + ], + "printable_area": [ + "5x5", + "395x5", + "395x395", + "5x395" + ], + "printable_height": "400", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max.json new file mode 100644 index 0000000..2f9ec6c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 Max.json @@ -0,0 +1,11 @@ +{ + "type": "machine_model", + "name": "Creality CR-6 Max", + "nozzle_diameter": "0.2;0.4;0.6;0.8", + "bed_texture": "creality_cr6se_buildplate_texture.png", + "family": "Creality", + "hotend_model": "", + "machine_tech": "FFF", + "model_id": "Creality_CR_6_Max", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.2 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.2 nozzle.json new file mode 100644 index 0000000..735a4d4 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.2 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality CR-6 SE 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-6 SE", + "printer_structure": "i3", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "printer_variant": "0.2", + "default_print_profile": "0.16mm Opitmal @Creality CR-6 0.2", + "nozzle_diameter": [ + "0.2" + ], + "printable_area": [ + "5x0", + "230x0", + "230x235", + "5x235" + ], + "printable_height": "250", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.4 nozzle.json new file mode 100644 index 0000000..cb835d9 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.4 nozzle.json @@ -0,0 +1,26 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality CR-6 SE 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-6 SE", + "printer_structure": "i3", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "default_print_profile": "0.20mm Standard @Creality CR-6 0.4", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "5x0", + "230x0", + "230x235", + "5x235" + ], + "printable_height": "250", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.6 nozzle.json new file mode 100644 index 0000000..dd8888c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.6 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality CR-6 SE 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-6 SE", + "printer_structure": "i3", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "printer_variant": "0.6", + "default_print_profile": "0.20mm Standard @Creality CR-6 0.6", + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "5x0", + "230x0", + "230x235", + "5x235" + ], + "printable_height": "250", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.8 nozzle.json new file mode 100644 index 0000000..ef2aa08 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE 0.8 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality CR-6 SE 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-6 SE", + "printer_structure": "i3", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "printer_variant": "0.8", + "default_print_profile": "0.32mm Standard @Creality CR-6 0.8", + "nozzle_diameter": [ + "0.8" + ], + "printable_area": [ + "5x0", + "230x0", + "230x235", + "5x235" + ], + "printable_height": "250", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE.json new file mode 100644 index 0000000..219dc01 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-6 SE.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality CR-6 SE", + "nozzle_diameter": "0.2;0.4;0.6;0.8", + "bed_model": "creality_cr6se_buildplate_model.stl", + "bed_texture": "creality_cr6se_buildplate_texture.png", + "family": "Creality", + "hotend_model": "", + "machine_tech": "FFF", + "model_id": "Creality_CR_6_SE", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-M4 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-M4 0.4 nozzle.json new file mode 100644 index 0000000..97db7bb --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-M4 0.4 nozzle.json @@ -0,0 +1,58 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality CR-M4 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-M4", + "gcode_flavor": "marlin", + "printer_structure": "i3", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "default_print_profile": "0.20mm Standard @Creality CR-M4", + "nozzle_diameter": [ + "0.4" + ], + "printable_height": "470", + "printable_area": [ + "0x0", + "450x0", + "450x450", + "0x450" + ], + "machine_max_speed_e": [ + "50", + "50" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_acceleration_extruding": [ + "700", + "700" + ], + "machine_max_jerk_x": [ + "10", + "10" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "retraction_minimum_travel": [ + "0.8" + ], + "retraction_length": [ + "0.8" + ], + "retraction_speed": [ + "40" + ], + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800", + "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality CR-M4.json b/.config/OrcaSlicer/system/Creality/machine/Creality CR-M4.json new file mode 100644 index 0000000..889591f --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality CR-M4.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality CR-M4", + "model_id": "Creality-CR-M4", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_crm4_buildplate_model.stl", + "bed_texture": "creality_crm4_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.2 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.2 nozzle.json new file mode 100644 index 0000000..020a234 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.2 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3", + "printer_variant": "0.2", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3 0.2", + "thumbnails": [""], + "nozzle_diameter": [ + "0.2" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "25", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.16" + ], + "min_layer_height": [ + "0.04" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "4" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.4 nozzle.json new file mode 100644 index 0000000..2273fec --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.4 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3", + "printer_variant": "0.4", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3", + "thumbnails": [""], + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "25", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.36" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "4" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.6 nozzle.json new file mode 100644 index 0000000..3ca555c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.6 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3", + "printer_variant": "0.6", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3 0.6", + "thumbnails": [""], + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "25", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.48" + ], + "min_layer_height": [ + "0.12" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "4" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.8 nozzle.json new file mode 100644 index 0000000..1f6e3c3 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 0.8 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3", + "printer_variant": "0.8", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3 0.8", + "thumbnails": [""], + "nozzle_diameter": [ + "0.8" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "25", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.64" + ], + "min_layer_height": [ + "0.16" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "4" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.2 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.2 nozzle.json new file mode 100644 index 0000000..bef8c38 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.2 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 Pro 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 Pro", + "printer_variant": "0.2", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3 Pro 0.2", + "thumbnails": [""], + "nozzle_diameter": [ + "0.2" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "25", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.16" + ], + "min_layer_height": [ + "0.04" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "4" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json new file mode 100644 index 0000000..50d89f5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 Pro 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 Pro", + "printer_variant": "0.4", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3 Pro 0.4", + "thumbnails": [""], + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "25", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.36" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "4" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.6 nozzle.json new file mode 100644 index 0000000..268a063 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.6 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 Pro 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 Pro", + "printer_variant": "0.6", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3 Pro 0.6", + "thumbnails": [""], + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "25", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.48" + ], + "min_layer_height": [ + "0.12" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "4" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.8 nozzle.json new file mode 100644 index 0000000..b49092d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro 0.8 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 Pro 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 Pro", + "printer_variant": "0.8", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3 Pro 0.8", + "thumbnails": [""], + "nozzle_diameter": [ + "0.8" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "25", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.64" + ], + "min_layer_height": [ + "0.16" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "4" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro.json new file mode 100644 index 0000000..6df373e --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 Pro.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-3 Pro", + "model_id": "Creality-Ender3-Pro", + "nozzle_diameter": "0.2;0.4;0.6;0.8", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender3v2_buildplate_model.stl", + "bed_texture": "creality_ender3v2_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json new file mode 100644 index 0000000..695d7d6 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 S1 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 S1", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3S1", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "270", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.36" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "1" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.2 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.2 nozzle.json new file mode 100644 index 0000000..b8fc2bc --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.2 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 S1 Plus 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 S1 Plus", + "printer_variant": "0.2", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3S1Plus 0.2", + "nozzle_diameter": [ + "0.2" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "5000", + "5000" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.16" + ], + "min_layer_height": [ + "0.04" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "1" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.4" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "45" + ], + "deretraction_speed": [ + "45" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling \nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.4 nozzle.json new file mode 100644 index 0000000..1743f74 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.4 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 S1 Plus 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 S1 Plus", + "printer_variant": "0.4", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3S1Plus 0.4", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "5000", + "5000" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.36" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "1" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.4" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "45" + ], + "deretraction_speed": [ + "45" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.6 nozzle.json new file mode 100644 index 0000000..f774ae2 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.6 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 S1 Plus 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 S1 Plus", + "printer_variant": "0.6", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3S1Plus 0.6", + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "5000", + "5000" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.48" + ], + "min_layer_height": [ + "0.12" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "1" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.4" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "45" + ], + "deretraction_speed": [ + "45" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.8 nozzle.json new file mode 100644 index 0000000..bd4add3 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus 0.8 nozzle.json @@ -0,0 +1,115 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 S1 Plus 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 S1 Plus", + "printer_variant": "0.8", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3S1Plus 0.8", + "nozzle_diameter": [ + "0.8" + ], + "bed_shape": "rectangular", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "5000", + "5000" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.64" + ], + "min_layer_height": [ + "0.16" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "1" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.4" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "45" + ], + "deretraction_speed": [ + "45" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus.json new file mode 100644 index 0000000..4f1b3b5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Plus.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-3 S1 Plus", + "model_id": "Creality-Ender3-S1-Plus", + "nozzle_diameter": "0.2;0.4;0.6;0.8", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender3s1plus_buildplate_model.stl", + "bed_texture": "creality_ender3s1plus_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json new file mode 100644 index 0000000..d6a3a5f --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json @@ -0,0 +1,113 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 S1 Pro 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 S1 Pro", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3S1Pro", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "270", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1000", + "1000" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.36" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "1" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.8" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "30" + ], + "deretraction_speed": [ + "30" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro.json new file mode 100644 index 0000000..d536c16 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1 Pro.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-3 S1 Pro", + "model_id": "Creality-Ender3-S1-Pro", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender3s1pro_buildplate_model.stl", + "bed_texture": "creality_ender3s1pro_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1.json new file mode 100644 index 0000000..9b928a5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 S1.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-3 S1", + "model_id": "Creality-Ender3-S1", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender3s1_buildplate_model.stl", + "bed_texture": "creality_ender3s1_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json new file mode 100644 index 0000000..e36e3bf --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json @@ -0,0 +1,25 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 V2 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V2", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "default_print_profile": "0.20mm Standard @Creality Ender3V2", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo 0.4 nozzle.json new file mode 100644 index 0000000..f62fdb5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo 0.4 nozzle.json @@ -0,0 +1,88 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 V2 Neo 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V2 Neo", + "printer_structure": "i3", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "default_print_profile": "0.20mm Standard @Creality Ender3V2 Neo", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "brass", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "5000", + "5000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "500", + "500" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "50", + "50" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "10", + "10" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp\n\nG28 ;Home\nG29 ;Auto bed leveling (create mesh if not already stored)\nM420 S1 ;Enable mesh leveling\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800", + "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z", + "thumbnails_format": "JPG", + "thumbnails": [ + "200x200" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo.json new file mode 100644 index 0000000..dc58b44 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2 Neo.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-3 V2 Neo", + "model_id": "Creality_Ender_3_V2_Neo", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender3v2neo_buildplate_model.stl", + "bed_texture": "creality_ender3v2neo_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PLA;Creality Generic PETG" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2.json new file mode 100644 index 0000000..d16e301 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V2.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-3 V2", + "model_id": "Creality_Ender_3_V2", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender3v2_buildplate_model.stl", + "bed_texture": "creality_ender3v2_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.4 nozzle.json new file mode 100644 index 0000000..4edd30d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.4 nozzle.json @@ -0,0 +1,137 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 V3 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V3", + "gcode_flavor": "klipper", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3 V3", + "nozzle_diameter": [ + "0.4" + ], + "printer_variant": "0.4", + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "0", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "6000", + "6000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "5000", + "5000" + ], + "machine_max_acceleration_z": [ + "20000", + "20000" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "600", + "600" + ], + "machine_max_speed_y": [ + "600", + "600" + ], + "machine_max_speed_z": [ + "500", + "500" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "20", + "20" + ], + "max_layer_height": [ + "0.35" + ], + "min_layer_height": [ + "0.1" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "1" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.6" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "250", + "extruder_clearance_height_to_rod": "14", + "extruder_clearance_radius": "70", + "z_hop": [ + "0.2" + ], + "z_hop_types": [ + "Auto Lift" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "PAUSE", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality Generic PLA @Ender-3V3-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "96x96/PNG, 300x300/PNG" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.6 nozzle.json new file mode 100644 index 0000000..3e15a76 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 0.6 nozzle.json @@ -0,0 +1,137 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 V3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V3", + "gcode_flavor": "klipper", + "printer_structure": "i3", + "default_print_profile": "0.30mm Standard @Creality Ender3 V3", + "nozzle_diameter": [ + "0.6" + ], + "printer_variant": "0.6", + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "0", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "6000", + "6000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "5000", + "5000" + ], + "machine_max_acceleration_z": [ + "20000", + "20000" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "600", + "600" + ], + "machine_max_speed_y": [ + "600", + "600" + ], + "machine_max_speed_z": [ + "500", + "500" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "20", + "20" + ], + "max_layer_height": [ + "0.35" + ], + "min_layer_height": [ + "0.1" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "1" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.6" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "250", + "extruder_clearance_height_to_rod": "14", + "extruder_clearance_radius": "70", + "z_hop": [ + "0.2" + ], + "z_hop_types": [ + "Auto Lift" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "PAUSE", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality Generic PLA @Ender-3V3-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "96x96/PNG, 300x300/PNG" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json new file mode 100644 index 0000000..687145d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json @@ -0,0 +1,129 @@ +{ + "type": "machine", + "setting_id": "GM001", + "printer_settings_id": "Creality", + "name": "Creality Ender-3 V3 KE 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V3 KE", + "gcode_flavor": "klipper", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3V3KE", + "extruder_clearance_height_to_rod": "47", + "extruder_clearance_max_radius": "90", + "extruder_clearance_radius": "90", + "machine_load_filament_time": "11", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "245", + "nozzle_type": "brass", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "8000", + "8000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "8000", + "8000" + ], + "machine_max_acceleration_x": [ + "8000", + "8000" + ], + "machine_max_acceleration_y": [ + "8000", + "8000" + ], + "machine_max_acceleration_z": [ + "300", + "300" + ], + "machine_max_speed_e": [ + "40", + "40" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "7", + "7" + ], + "machine_max_jerk_y": [ + "7", + "7" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "retraction_minimum_travel": [ + "2" + ], + "wipe_distance": [ + "2" + ], + "retract_before_wipe": [ + "100%" + ], + "retraction_length": [ + "0.5" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "30" + ], + "deretraction_speed": [ + "0" + ], + "z_hop": [ + "0.2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality Generic PLA @Ender-3V3-all" + ], + "machine_start_gcode": "SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=fan0_min VALUE=30 ;compensate for fan speed\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 ;revert accel_to_decel back to 2500\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set bed temp\nG28 X Y ;Home XY axes\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nG28 Z ;Home Z axis & load bed mesh\nBED_MESH_CALIBRATE PROBE_COUNT=5,5 ;Auto bed level\n\nM104 S[nozzle_temperature_initial_layer] ;Set nozzle temp\nG92 E0 ;Reset Extruder\nG1 X-2.0 Y20 Z0.3 F5000.0 ;Move to start position\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 Z0.2 ;Lower nozzle to printing height\nG1 Y145.0 F1500.0 E15 ;Draw the first line\nG1 X-1.7 F5000.0 ;Move to side a little\nG1 Y30 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder", + "machine_end_gcode": "G92 E0 ;Reset Extruder\nG1 E-1.2 Z{max_layer_z + 0.5} F1800 ;Retract and raise Z\n{if max_layer_z < 50}\nG1 Z{max_layer_z + 25} F900 ;Raise Z more\n{endif}\n\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z", + "scan_first_layer": "0", + "thumbnails": [ + "96x96", + "300x300" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE.json new file mode 100644 index 0000000..8650ce5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 KE.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-3 V3 KE", + "model_id": "Creality-Ender3-V3-KE", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender3v3ke_buildplate_model.stl", + "bed_texture": "creality_ender3v3ke_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic ABS @Ender-3V3-all;Creality Generic ASA @Ender-3V3-all;Creality Generic PETG @Ender-3V3-all;Creality Generic PLA @Ender-3V3-all;Creality Generic PLA High Speed @Ender-3V3-all;Creality Generic PLA Matte @Ender-3V3-all;Creality Generic PLA Silk @Ender-3V3-all;Creality Generic TPU @Ender-3V3-all" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.4 nozzle.json new file mode 100644 index 0000000..c3f9026 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.4 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 V3 Plus 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V3 Plus", + "gcode_flavor": "klipper", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3 V3 Plus", + "nozzle_diameter": [ + "0.4" + ], + "printer_variant": "0.4", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "330", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "0", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.3" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.6" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "101", + "extruder_clearance_height_to_rod": "45", + "extruder_clearance_radius": "45", + "z_hop": [ + "0.12" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "PAUSE", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality Generic PLA @Ender-3V3-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "320x320" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.6 nozzle.json new file mode 100644 index 0000000..36e6dad --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus 0.6 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 V3 Plus 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V3 Plus", + "gcode_flavor": "klipper", + "printer_structure": "i3", + "default_print_profile": "0.30mm Standard @Creality Ender3 V3 Plus", + "nozzle_diameter": [ + "0.6" + ], + "printer_variant": "0.6", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "330", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "0", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.3" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.6" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "101", + "extruder_clearance_height_to_rod": "45", + "extruder_clearance_radius": "45", + "z_hop": [ + "0.12" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "PAUSE", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality Generic PLA @Ender-3V3-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "320x320" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus.json new file mode 100644 index 0000000..a00cd79 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 Plus.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-3 V3 Plus", + "model_id": "Creality-Ender3-V3-Plus", + "nozzle_diameter": "0.4;0.6", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender3v3plus_buildplate_model.stl", + "bed_texture": "creality_ender3v3plus_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic ABS @Ender-3V3-all;Creality Generic ASA @Ender-3V3-all;Creality Generic PETG @Ender-3V3-all;Creality Generic PLA @Ender-3V3-all;Creality Generic PLA High Speed @Ender-3V3-all;Creality Generic PLA Matte @Ender-3V3-all;Creality Generic PLA Silk @Ender-3V3-all;Creality Generic TPU @Ender-3V3-all" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json new file mode 100644 index 0000000..5168f2d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json @@ -0,0 +1,126 @@ +{ + "type": "machine", + "setting_id": "GM001", + "printer_settings_id": "Creality", + "name": "Creality Ender-3 V3 SE 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V3 SE", + "printer_variant": "0.2", + "gcode_flavor": "marlin2", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.2", + "extruder_clearance_height_to_rod": "47", + "extruder_clearance_max_radius": "90", + "extruder_clearance_radius": "90", + "machine_load_filament_time": "11", + "nozzle_diameter": [ + "0.2" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "brass", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "2500", + "2500" + ], + "machine_max_acceleration_retracting": [ + "500", + "500" + ], + "machine_max_acceleration_travel": [ + "2500", + "2500" + ], + "machine_max_acceleration_x": [ + "2500", + "2500" + ], + "machine_max_acceleration_y": [ + "2500", + "2500" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "40", + "40" + ], + "machine_max_speed_x": [ + "250", + "250" + ], + "machine_max_speed_y": [ + "250", + "250" + ], + "machine_max_speed_z": [ + "5", + "5" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "10", + "10" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.16" + ], + "min_layer_height": [ + "0.04" + ], + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "1.2" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "30" + ], + "z_hop_types": [ + "Spiral Lift" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA @Ender-3V3-all" + ], + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", + "scan_first_layer": "0", + "disable_m73": "1", + "thumbnails": [ + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json new file mode 100644 index 0000000..2bdb35a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json @@ -0,0 +1,126 @@ +{ + "type": "machine", + "setting_id": "GM001", + "printer_settings_id": "Creality", + "name": "Creality Ender-3 V3 SE 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V3 SE", + "printer_variant": "0.4", + "gcode_flavor": "marlin2", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.4", + "extruder_clearance_height_to_rod": "47", + "extruder_clearance_max_radius": "90", + "extruder_clearance_radius": "90", + "machine_load_filament_time": "11", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "brass", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "2500", + "2500" + ], + "machine_max_acceleration_retracting": [ + "500", + "500" + ], + "machine_max_acceleration_travel": [ + "2500", + "2500" + ], + "machine_max_acceleration_x": [ + "2500", + "2500" + ], + "machine_max_acceleration_y": [ + "2500", + "2500" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "40", + "40" + ], + "machine_max_speed_x": [ + "250", + "250" + ], + "machine_max_speed_y": [ + "250", + "250" + ], + "machine_max_speed_z": [ + "5", + "5" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "10", + "10" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "1.2" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "30" + ], + "z_hop_types": [ + "Spiral Lift" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA @Ender-3V3-all" + ], + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", + "scan_first_layer": "0", + "disable_m73": "1", + "thumbnails": [ + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json new file mode 100644 index 0000000..5be6ec8 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json @@ -0,0 +1,126 @@ +{ + "type": "machine", + "setting_id": "GM001", + "printer_settings_id": "Creality", + "name": "Creality Ender-3 V3 SE 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V3 SE", + "printer_variant": "0.6", + "gcode_flavor": "marlin2", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.6", + "extruder_clearance_height_to_rod": "47", + "extruder_clearance_max_radius": "90", + "extruder_clearance_radius": "90", + "machine_load_filament_time": "11", + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "brass", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "2500", + "2500" + ], + "machine_max_acceleration_retracting": [ + "500", + "500" + ], + "machine_max_acceleration_travel": [ + "2500", + "2500" + ], + "machine_max_acceleration_x": [ + "2500", + "2500" + ], + "machine_max_acceleration_y": [ + "2500", + "2500" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "40", + "40" + ], + "machine_max_speed_x": [ + "250", + "250" + ], + "machine_max_speed_y": [ + "250", + "250" + ], + "machine_max_speed_z": [ + "5", + "5" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "10", + "10" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.48" + ], + "min_layer_height": [ + "0.12" + ], + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "1.2" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "30" + ], + "z_hop_types": [ + "Spiral Lift" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA @Ender-3V3-all" + ], + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", + "scan_first_layer": "0", + "disable_m73": "1", + "thumbnails": [ + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json new file mode 100644 index 0000000..fc88a58 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json @@ -0,0 +1,126 @@ +{ + "type": "machine", + "setting_id": "GM001", + "printer_settings_id": "Creality", + "name": "Creality Ender-3 V3 SE 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V3 SE", + "printer_variant": "0.8", + "gcode_flavor": "marlin2", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.8", + "extruder_clearance_height_to_rod": "47", + "extruder_clearance_max_radius": "90", + "extruder_clearance_radius": "90", + "machine_load_filament_time": "11", + "nozzle_diameter": [ + "0.8" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "brass", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "2500", + "2500" + ], + "machine_max_acceleration_retracting": [ + "500", + "500" + ], + "machine_max_acceleration_travel": [ + "2500", + "2500" + ], + "machine_max_acceleration_x": [ + "2500", + "2500" + ], + "machine_max_acceleration_y": [ + "2500", + "2500" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "40", + "40" + ], + "machine_max_speed_x": [ + "250", + "250" + ], + "machine_max_speed_y": [ + "250", + "250" + ], + "machine_max_speed_z": [ + "5", + "5" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "10", + "10" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.64" + ], + "min_layer_height": [ + "0.16" + ], + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "1.2" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "30" + ], + "z_hop_types": [ + "Spiral Lift" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA @Ender-3V3-all" + ], + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", + "scan_first_layer": "0", + "disable_m73": "1", + "thumbnails": [ + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE.json new file mode 100644 index 0000000..e57336a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3 SE.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-3 V3 SE", + "model_id": "Creality-Ender3-V3-SE", + "nozzle_diameter": "0.2;0.4;0.6;0.8", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender3v3se_buildplate_model.stl", + "bed_texture": "creality_ender3v3se_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic ABS @Ender-3V3-all;Creality Generic ASA @Ender-3V3-all;Creality Generic PETG @Ender-3V3-all;Creality Generic PLA @Ender-3V3-all;Creality Generic PLA High Speed @Ender-3V3-all;Creality Generic PLA Matte @Ender-3V3-all;Creality Generic PLA Silk @Ender-3V3-all;Creality Generic TPU @Ender-3V3-all" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3.json new file mode 100644 index 0000000..fc5eb11 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3 V3.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-3 V3", + "model_id": "Creality-Ender3-V3", + "nozzle_diameter": "0.4;0.6", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender3v3_buildplate_model.stl", + "bed_texture": "creality_ender3v3_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic ABS @Ender-3V3-all;Creality Generic ASA @Ender-3V3-all;Creality Generic PETG @Ender-3V3-all;Creality Generic PLA @Ender-3V3-all;Creality Generic PLA High Speed @Ender-3V3-all;Creality Generic PLA Matte @Ender-3V3-all;Creality Generic PLA Silk @Ender-3V3-all;Creality Generic TPU @Ender-3V3-all" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3.json new file mode 100644 index 0000000..5c06160 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-3.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-3", + "model_id": "Creality-Ender3", + "nozzle_diameter": "0.2;0.4;0.6;0.8", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender3v2_buildplate_model.stl", + "bed_texture": "creality_ender3v2_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 0.4 nozzle.json new file mode 100644 index 0000000..393659d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 0.4 nozzle.json @@ -0,0 +1,109 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-5 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5", + "default_print_profile": "0.20mm Standard @Creality Ender5", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "5", + "5" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "6" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M0", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json new file mode 100644 index 0000000..2ae38b1 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json @@ -0,0 +1,112 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-5 Max 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5 Max", + "gcode_flavor": "klipper", + "printer_structure": "i3", + "auxiliary_fan": "0", + "bbl_use_printhost": "0", + "bed_exclude_area": "0x0", + "bed_mesh_max": "99999,99999", + "bed_mesh_min": "-99999,-99999", + "bed_mesh_probe_distance": "50,50", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "best_object_pos": "0.5,0.5", + "change_filament_gcode": "PAUSE", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "creality_flush_time": "86.0", + "default_print_profile": "0.2mm Standard @Creality Ender-5 Max 0.4 nozzle", + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "1", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "120", + "extruder_clearance_height_to_rod": "35", + "extruder_clearance_radius": "85", + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "machine_LED_light_exist": "1", + "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \n \nG1 Z5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X395 Y395 F6000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", + "machine_load_filament_time": "11", + "machine_max_acceleration_e": "30000", + "machine_max_acceleration_extruding": "50000", + "machine_max_acceleration_retracting": "50000", + "machine_max_acceleration_travel": "50000", + "machine_max_acceleration_x": "50000", + "machine_max_acceleration_y": "50000", + "machine_max_acceleration_z": "1000", + "machine_max_jerk_e": "100", + "machine_max_jerk_x": "100", + "machine_max_jerk_y": "100", + "machine_max_jerk_z": "0.4", + "machine_max_speed_e": "1000", + "machine_max_speed_x": "1000", + "machine_max_speed_y": "1000", + "machine_max_speed_z": "30", + "machine_min_extruding_rate": "0,0", + "machine_min_travel_rate": "0,0", + "machine_pause_gcode": "PAUSE", + "machine_platform_motion_enable": "0", + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-1.0 Y120 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-1.0 Y245.0 Z0.28 F1500.0 E7 ;Draw the first line \nG1 X-0.6 Y245.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-0.6 Y120 Z0.28 F1500.0 E15 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_unload_filament_time": "0", + "manual_filament_change": "1", + "nozzle_hrc": "0", + "nozzle_type": "brass", + "nozzle_volume": "0", + "parking_pos_retraction": "0", + "preferred_orientation": "0", + "prime_tower_position_type": "Middle Upper", + "printable_area": "0x0,400x0,400x400,0x400", + "printable_height": "400", + "printer_technology": "FFF", + "printer_variant": "0.4", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "purge_in_prime_tower": "1", + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "0", + "support_chamber_temp_control": "0", + "support_multi_bed_types": "1", + "thumbnails": "96x96,300x300", + "thumbnails_format": "PNG", + "time_cost": "0", + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "z_offset": "0", + "default_filament_profile": [ + "Creality Hyper PLA @Ender-5Max-all" + ], + "deretraction_speed": "50", + "extruder_colour": "#FCE94F", + "extruder_offset": "0x0", + "max_layer_height": "0.36", + "min_layer_height": "0.08", + "nozzle_diameter": [ + "0.4" + ], + "retract_before_wipe": "100", + "retract_length_toolchange": "0", + "retract_lift_above": "0", + "retract_lift_below": "399", + "retract_lift_enforce": "All Surfaces", + "retract_restart_extra": "0", + "retract_restart_extra_toolchange": "0", + "retract_when_changing_layer": "1", + "retraction_length": "0.8", + "retraction_minimum_travel": "0.5", + "retraction_speed": "50", + "wipe": "1", + "wipe_distance": "1", + "z_hop": "0.4", + "z_hop_types": "Slope Lift" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Max.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Max.json new file mode 100644 index 0000000..124410f --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Max.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-5 Max", + "model_id": "Creality-Ender5-Max", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender5max_buildplate_model.stl", + "bed_texture": "creality_ender5max_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Hyper PLA-CF @Ender-5Max-all;Creality Hyper PLA @Ender-5Max-all;Creality Hyper ABS @Ender-5Max-all;Creality Generic TPU @Ender-5Max-all;Creality Generic ASA @Ender-5Max-all;Creality Silk PLA @Ender-5Max-all;Creality Generic PLA @Ender-5Max-all;Creality Generic PETG @Ender-5Max-all;Creality Generic ABS @Ender-5Max-all;Creality Generic PA @Ender-5Max-all" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json new file mode 100644 index 0000000..0b10142 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json @@ -0,0 +1,112 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-5 Plus 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5 Plus", + "default_print_profile": "0.20mm Standard @Creality Ender5Plus", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "400", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_e": [ + "1000" + ], + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "300", + "300" + ], + "machine_max_speed_y": [ + "300", + "300" + ], + "machine_max_speed_z": [ + "5", + "5" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "1" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M0", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; move print head out of the way\n{if max_layer_z < printable_height-10}G1 Z{z_offset+ printable_height-10} F600{endif} ; Move print bed close to the bottom\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus.json new file mode 100644 index 0000000..dc9b343 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Plus.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-5 Plus", + "model_id": "Creality-Ender5-Plus", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender5plus_buildplate_model.stl", + "bed_texture": "creality_ender5plus_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.2 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.2 nozzle.json new file mode 100644 index 0000000..02ec45a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.2 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-5 Pro (2019) 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5 Pro (2019)", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "printer_variant": "0.2", + "default_print_profile": "0.16mm Optimal @Creality Ender5Pro (2019) 0.2", + "max_layer_height": [ + "0.16" + ], + "min_layer_height": [ + "0.05" + ], + "nozzle_diameter": [ + "0.2" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.25 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.25 nozzle.json new file mode 100644 index 0000000..7afcba3 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.25 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-5 Pro (2019) 0.25 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5 Pro (2019)", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "printer_variant": "0.25", + "default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019) 0.25", + "max_layer_height": [ + "0.2" + ], + "min_layer_height": [ + "0.06" + ], + "nozzle_diameter": [ + "0.25" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.3 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.3 nozzle.json new file mode 100644 index 0000000..88ad511 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.3 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-5 Pro (2019) 0.3 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5 Pro (2019)", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "printer_variant": "0.3", + "default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019) 0.3", + "max_layer_height": [ + "0.24" + ], + "min_layer_height": [ + "0.08" + ], + "nozzle_diameter": [ + "0.3" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.4 nozzle.json new file mode 100644 index 0000000..fe029ae --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.4 nozzle.json @@ -0,0 +1,25 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-5 Pro (2019) 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5 Pro (2019)", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019)", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.5 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.5 nozzle.json new file mode 100644 index 0000000..0990664 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.5 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-5 Pro (2019) 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5 Pro (2019)", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "printer_variant": "0.5", + "default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019) 0.5", + "max_layer_height": [ + "0.4" + ], + "min_layer_height": [ + "0.12" + ], + "nozzle_diameter": [ + "0.5" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.6 nozzle.json new file mode 100644 index 0000000..1956e96 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.6 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-5 Pro (2019) 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5 Pro (2019)", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "printer_variant": "0.6", + "default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019) 0.6", + "max_layer_height": [ + "0.48" + ], + "min_layer_height": [ + "0.16" + ], + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.8 nozzle.json new file mode 100644 index 0000000..2191dbd --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 0.8 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-5 Pro (2019) 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5 Pro (2019)", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "printer_variant": "0.8", + "default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019) 0.8", + "max_layer_height": [ + "0.64" + ], + "min_layer_height": [ + "0.2" + ], + "nozzle_diameter": [ + "0.8" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 1.0 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 1.0 nozzle.json new file mode 100644 index 0000000..5b9d7f1 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019) 1.0 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-5 Pro (2019) 1.0 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5 Pro (2019)", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "printer_variant": "1.0", + "default_print_profile": "0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0", + "max_layer_height": [ + "0.80" + ], + "min_layer_height": [ + "0.25" + ], + "nozzle_diameter": [ + "1.0" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019).json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019).json new file mode 100644 index 0000000..3f71b5f --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 Pro (2019).json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-5 Pro (2019)", + "model_id": "Creality_Ender_5_Pro_2019", + "nozzle_diameter": "0.2;0.25;0.3;0.4;0.5;0.6;0.8;1.0", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender5pro_buildplate_model.stl", + "bed_texture": "creality_ender5pro_buildplate_texture.png", + "hotend_model": "hotend.stl", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json new file mode 100644 index 0000000..84f23c9 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json @@ -0,0 +1,109 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-5 S1 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5 S1", + "default_print_profile": "0.20mm Standard @Creality Ender5S1", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "5", + "5" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "2" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "30" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 S1.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 S1.json new file mode 100644 index 0000000..32df7c2 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5 S1.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-5 S1", + "model_id": "Creality-Ender5-S1", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender5s1_buildplate_model.stl", + "bed_texture": "creality_ender5s1_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5.json new file mode 100644 index 0000000..3d8f145 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-5", + "model_id": "Creality-Ender5", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender5_buildplate_model.stl", + "bed_texture": "creality_ender5_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5S 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5S 0.4 nozzle.json new file mode 100644 index 0000000..79c73d5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5S 0.4 nozzle.json @@ -0,0 +1,109 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-5S 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5S", + "default_print_profile": "0.20mm Standard @Creality Ender5S", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "5", + "5" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "2" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M0", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5S.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5S.json new file mode 100644 index 0000000..a118314 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-5S.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-5S", + "model_id": "Creality-Ender5S", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender5s_buildplate_model.stl", + "bed_texture": "creality_ender5s_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-6 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-6 0.4 nozzle.json new file mode 100644 index 0000000..6fe8d0f --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-6 0.4 nozzle.json @@ -0,0 +1,109 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-6 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-6", + "default_print_profile": "0.20mm Standard @Creality Ender6", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "250x0", + "250x250", + "0x250" + ], + "printable_height": "400", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "5" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M0", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; move print head out of the way\n{if max_layer_z < printable_height-10}G1 Z{z_offset+ printable_height-10} F600{endif} ; Move print bed close to the bottom\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Ender-6.json b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-6.json new file mode 100644 index 0000000..73a5637 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Ender-6.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-6", + "model_id": "Creality-Ender6", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender6_buildplate_model.stl", + "bed_texture": "creality_ender6_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Hi 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Hi 0.4 nozzle.json new file mode 100644 index 0000000..bbe1418 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Hi 0.4 nozzle.json @@ -0,0 +1,145 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Hi 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Hi", + "gcode_flavor": "klipper", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Hi", + "nozzle_diameter": [ + "0.4" + ], + "nozzle_type": "hardened_steel", + "nozzle_volume": "183", + "printer_variant": "0.4", + "printable_area": [ + "0x0", + "260x0", + "260x260", + "0x260" + ], + "printable_height": "300", + "auxiliary_fan": "0", + "support_air_filtration": "0", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "12000", + "12000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "12000", + "12000" + ], + "machine_max_acceleration_x": [ + "12000", + "12000" + ], + "machine_max_acceleration_y": [ + "12000", + "12000" + ], + "machine_max_acceleration_z": [ + "1000", + "1000" + ], + "machine_max_speed_e": [ + "50", + "50" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "purge_in_prime_tower": "0", + "retraction_minimum_travel": [ + "0.5" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.8" + ], + "retract_length_toolchange": [ + "0" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "retract_lift_below": [ + "299" + ], + "retract_when_changing_layer": [ + "1" + ], + "enable_filament_ramming": "0", + "extruder_clearance_height_to_lid": "301", + "extruder_clearance_height_to_rod": "27", + "extruder_clearance_radius": "55", + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "machine_pause_gcode": "PAUSE", + "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X260 Y180 F30000\nG1 Z{z_after_toolchange} F600", + "default_filament_profile": [ + "Creality Generic PLA @Hi-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "96x96/PNG, 300x300/PNG" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Hi 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Hi 0.6 nozzle.json new file mode 100644 index 0000000..4540512 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Hi 0.6 nozzle.json @@ -0,0 +1,145 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Hi 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Hi", + "gcode_flavor": "klipper", + "printer_structure": "i3", + "default_print_profile": "0.30mm Standard @Creality Hi", + "nozzle_diameter": [ + "0.6" + ], + "nozzle_type": "hardened_steel", + "nozzle_volume": "183", + "printer_variant": "0.6", + "printable_area": [ + "0x0", + "260x0", + "260x260", + "0x260" + ], + "printable_height": "300", + "auxiliary_fan": "0", + "support_air_filtration": "0", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "12000", + "12000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "12000", + "12000" + ], + "machine_max_acceleration_x": [ + "12000", + "12000" + ], + "machine_max_acceleration_y": [ + "12000", + "12000" + ], + "machine_max_acceleration_z": [ + "1000", + "1000" + ], + "machine_max_speed_e": [ + "50", + "50" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.35" + ], + "min_layer_height": [ + "0.1" + ], + "printer_settings_id": "Creality", + "purge_in_prime_tower": "0", + "retraction_minimum_travel": [ + "0.5" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.8" + ], + "retract_length_toolchange": [ + "0" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "retract_lift_below": [ + "299" + ], + "retract_when_changing_layer": [ + "1" + ], + "enable_filament_ramming": "0", + "extruder_clearance_height_to_lid": "301", + "extruder_clearance_height_to_rod": "27", + "extruder_clearance_radius": "55", + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "machine_pause_gcode": "PAUSE", + "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X260 Y180 F30000\nG1 Z{z_after_toolchange} F600", + "default_filament_profile": [ + "Creality Generic PLA @Hi-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "96x96/PNG, 300x300/PNG" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Hi.json b/.config/OrcaSlicer/system/Creality/machine/Creality Hi.json new file mode 100644 index 0000000..73fce0e --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Hi.json @@ -0,0 +1,13 @@ +{ + "type": "machine_model", + "name": "Creality Hi", + "model_id": "Creality-Hi", + "nozzle_diameter": "0.4;0.6", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_hi_buildplate_model.stl", + "bed_texture": "creality_hi_buildplate_texture.png", + "default_bed_type": "Textured PEI Plate", + "hotend_model": "", + "default_materials": "Creality Generic ABS @Hi-all;Creality Generic ASA @Hi-all;Creality Generic ASA-CF @Hi-all;Creality Generic PETG @Hi-all;Creality Generic PETG-CF @Hi-all;Creality Generic PLA @Hi-all;Creality Generic PLA High Speed @Hi-all;Creality Generic PLA Matte @Hi-all;Creality Generic PLA Silk @Hi-all;Creality Generic PLA-CF @Hi-all;Creality Generic PLA Wood @Hi-all;Creality Generic TPU @Hi-all" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K1 (0.4 nozzle).json b/.config/OrcaSlicer/system/Creality/machine/Creality K1 (0.4 nozzle).json new file mode 100644 index 0000000..707fb25 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K1 (0.4 nozzle).json @@ -0,0 +1,133 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K1 (0.4 nozzle)", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K1", + "gcode_flavor": "klipper", + "default_print_profile": "0.20mm Standard @Creality K1 (0.4 nozzle)", + "nozzle_diameter": [ + "0.4" + ], + "printer_variant": "0.4", + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "brass", + "auxiliary_fan": "1", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.3" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.6" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "101", + "extruder_clearance_height_to_rod": "45", + "extruder_clearance_radius": "45", + "z_hop": [ + "0.2" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "PAUSE", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality HF Generic PLA" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "100x100", + "320x320" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K1 (0.6 nozzle).json b/.config/OrcaSlicer/system/Creality/machine/Creality K1 (0.6 nozzle).json new file mode 100644 index 0000000..f5b4464 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K1 (0.6 nozzle).json @@ -0,0 +1,133 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K1 (0.6 nozzle)", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K1", + "gcode_flavor": "klipper", + "default_print_profile": "0.30mm Standard @Creality K1 (0.6 nozzle)", + "nozzle_diameter": [ + "0.6" + ], + "printer_variant": "0.6", + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "brass", + "auxiliary_fan": "1", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.4" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.5" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "101", + "extruder_clearance_height_to_rod": "45", + "extruder_clearance_radius": "45", + "z_hop": [ + "0.2" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "PAUSE", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality HF Generic PLA" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "100x100", + "320x320" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K1 (0.8 nozzle).json b/.config/OrcaSlicer/system/Creality/machine/Creality K1 (0.8 nozzle).json new file mode 100644 index 0000000..0a15d1d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K1 (0.8 nozzle).json @@ -0,0 +1,133 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K1 (0.8 nozzle)", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K1", + "gcode_flavor": "klipper", + "default_print_profile": "0.40mm Standard @Creality K1 (0.8 nozzle)", + "nozzle_diameter": [ + "0.8" + ], + "printer_variant": "0.8", + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "brass", + "auxiliary_fan": "1", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.5" + ], + "min_layer_height": [ + "0.16" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.5" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "101", + "extruder_clearance_height_to_rod": "45", + "extruder_clearance_radius": "45", + "z_hop": [ + "0.2" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "PAUSE", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality HF Generic PLA" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "100x100", + "320x320" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.4 nozzle).json b/.config/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.4 nozzle).json new file mode 100644 index 0000000..bb772a0 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.4 nozzle).json @@ -0,0 +1,134 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K1 Max (0.4 nozzle)", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K1 Max", + "gcode_flavor": "klipper", + "default_print_profile": "0.20mm Standard @Creality K1Max (0.4 nozzle)", + "nozzle_diameter": [ + "0.4" + ], + "printer_variant": "0.4", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "300", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "1", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.3" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.6" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "101", + "extruder_clearance_height_to_rod": "45", + "extruder_clearance_radius": "45", + "z_hop": [ + "0.2" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "PAUSE", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality HF Generic PLA" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "100x100", + "320x320" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.6 nozzle).json b/.config/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.6 nozzle).json new file mode 100644 index 0000000..d19a20a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.6 nozzle).json @@ -0,0 +1,134 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K1 Max (0.6 nozzle)", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K1 Max", + "gcode_flavor": "klipper", + "default_print_profile": "0.30mm Standard @Creality K1Max (0.6 nozzle)", + "nozzle_diameter": [ + "0.6" + ], + "printer_variant": "0.6", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "300", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "1", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.4" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.5" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "101", + "extruder_clearance_height_to_rod": "45", + "extruder_clearance_radius": "45", + "z_hop": [ + "0.2" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "PAUSE", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality HF Generic PLA" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "100x100", + "320x320" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.8 nozzle).json b/.config/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.8 nozzle).json new file mode 100644 index 0000000..c752032 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K1 Max (0.8 nozzle).json @@ -0,0 +1,134 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K1 Max (0.8 nozzle)", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K1 Max", + "gcode_flavor": "klipper", + "default_print_profile": "0.40mm Standard @Creality K1Max (0.8 nozzle)", + "nozzle_diameter": [ + "0.8" + ], + "printer_variant": "0.8", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "300", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "1", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.5" + ], + "min_layer_height": [ + "0.16" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.5" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "101", + "extruder_clearance_height_to_rod": "45", + "extruder_clearance_radius": "45", + "z_hop": [ + "0.2" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "PAUSE", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality HF Generic PLA" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "100x100", + "320x320" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K1 Max.json b/.config/OrcaSlicer/system/Creality/machine/Creality K1 Max.json new file mode 100644 index 0000000..10df2e7 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K1 Max.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality K1 Max", + "model_id": "Creality-K1-Max", + "nozzle_diameter": "0.4;0.6;0.8", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_k1max_buildplate_model.stl", + "bed_texture": "creality_k1max_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG;Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K1 SE 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality K1 SE 0.4 nozzle.json new file mode 100644 index 0000000..51e322a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K1 SE 0.4 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K1 SE 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K1 SE", + "gcode_flavor": "klipper", + "default_print_profile": "0.20mm Standard @Creality K1 SE 0.4", + "nozzle_diameter": [ + "0.4" + ], + "printer_variant": "0.4", + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "0", + "support_air_filtration": "0", + "support_multi_bed_types": "0", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "20", + "20" + ], + "machine_max_jerk_z": [ + "5", + "5" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "1" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.8" + ], + "retract_length_toolchange": [ + "0" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "101", + "extruder_clearance_height_to_rod": "45", + "extruder_clearance_radius": "45", + "z_hop": [ + "0.4" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "0", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality Generic PLA @K1-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails_format": "PNG", + "thumbnails": [ + "300x300", + "96x96" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K1 SE.json b/.config/OrcaSlicer/system/Creality/machine/Creality K1 SE.json new file mode 100644 index 0000000..e8a6d98 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K1 SE.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality K1 SE", + "model_id": "Creality-K1-SE", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_k1se_buildplate_model.stl", + "bed_texture": "creality_k1se_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic ABS @K1-all;Creality Generic ASA @K1-all;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG @K1-all;Creality Generic PLA @K1-all;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU @K1-all" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K1.json b/.config/OrcaSlicer/system/Creality/machine/Creality K1.json new file mode 100644 index 0000000..73e10d7 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K1.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality K1", + "model_id": "Creality-K1", + "nozzle_diameter": "0.4;0.6;0.8", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_k1_buildplate_model.stl", + "bed_texture": "creality_k1_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PC @K1-all;Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PETG;Creality Generic TPU" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K1C 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality K1C 0.4 nozzle.json new file mode 100644 index 0000000..d4deca8 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K1C 0.4 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K1C 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K1C", + "gcode_flavor": "klipper", + "default_print_profile": "0.20mm Standard @Creality K1C (0.4 nozzle)", + "nozzle_diameter": [ + "0.4" + ], + "printer_variant": "0.4", + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "1", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.3" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.6" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "101", + "extruder_clearance_height_to_rod": "45", + "extruder_clearance_radius": "45", + "z_hop": [ + "0.2" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "PAUSE", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality Generic PLA @K1-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "100x100", + "320x320" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K1C 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality K1C 0.6 nozzle.json new file mode 100644 index 0000000..46b2ae9 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K1C 0.6 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K1C 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K1C", + "gcode_flavor": "klipper", + "default_print_profile": "0.30mm Standard @Creality K1C (0.6 nozzle)", + "nozzle_diameter": [ + "0.6" + ], + "printer_variant": "0.6", + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "1", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "1000", + "1000" + ], + "machine_max_speed_y": [ + "1000", + "1000" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.4" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.5" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "101", + "extruder_clearance_height_to_rod": "45", + "extruder_clearance_radius": "45", + "z_hop": [ + "0.2" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "PAUSE", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality Generic PLA @K1-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "100x100", + "320x320" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K1C 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality K1C 0.8 nozzle.json new file mode 100644 index 0000000..d96df6c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K1C 0.8 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K1C 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K1C", + "gcode_flavor": "klipper", + "default_print_profile": "0.40mm Standard @Creality K1C (0.8 nozzle)", + "nozzle_diameter": [ + "0.8" + ], + "printer_variant": "0.8", + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "1", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "1000", + "1000" + ], + "machine_max_speed_y": [ + "1000", + "1000" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "12", + "12" + ], + "machine_max_jerk_y": [ + "12", + "12" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "max_layer_height": [ + "0.5" + ], + "min_layer_height": [ + "0.16" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.5" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "101", + "extruder_clearance_height_to_rod": "45", + "extruder_clearance_radius": "45", + "z_hop": [ + "0.2" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "PAUSE", + "machine_pause_gcode": "PAUSE", + "default_filament_profile": [ + "Creality Generic PLA @K1-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "scan_first_layer": "0", + "thumbnails": [ + "100x100", + "320x320" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K1C.json b/.config/OrcaSlicer/system/Creality/machine/Creality K1C.json new file mode 100644 index 0000000..610866a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K1C.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality K1C", + "model_id": "Creality-K1C", + "nozzle_diameter": "0.4;0.6;0.8", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_k1c_buildplate_model.stl", + "bed_texture": "creality_k1c_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic ABS @K1-all;Creality Generic ASA @K1-all;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG @K1-all;Creality Generic PLA @K1-all;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU @K1-all" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.2 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.2 nozzle.json new file mode 100644 index 0000000..1c36aa9 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.2 nozzle.json @@ -0,0 +1,149 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K2 Plus 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K2 Plus", + "gcode_flavor": "klipper", + "default_print_profile": "0.14mm Optimal @Creality K2 Plus 0.2 nozzle", + "nozzle_diameter": [ + "0.2" + ], + "printer_variant": "0.2", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "350", + "nozzle_type": "hardened_steel", + "nozzle_volume": "183", + "auxiliary_fan": "1", + "support_air_filtration": "1", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "30000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "30000", + "30000" + ], + "machine_max_acceleration_x": [ + "30000", + "30000" + ], + "machine_max_acceleration_y": [ + "30000", + "30000" + ], + "machine_max_acceleration_z": [ + "5000", + "5000" + ], + "machine_max_speed_e": [ + "50", + "50" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "20", + "20" + ], + "machine_max_jerk_z": [ + "5", + "5" + ], + "max_layer_height": [ + "0.3" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "1" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.5" + ], + "retract_length_toolchange": [ + "0" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "349" + ], + "enable_filament_ramming": "0", + "purge_in_prime_tower": "0", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "parking_pos_retraction": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "118", + "extruder_clearance_height_to_rod": "24", + "extruder_clearance_radius": "64", + "z_hop": [ + "0.4" + ], + "wipe_distance": [ + "1" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "0", + "default_filament_profile": [ + "Creality Generic PLA @K2-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600", + "machine_end_gcode": "END_PRINT", + "machine_pause_gcode": "PAUSE", + "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "scan_first_layer": "0", + "thumbnails_format": "PNG", + "thumbnails": [ + "300x300", + "96x96" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.4 nozzle.json new file mode 100644 index 0000000..a050f9c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.4 nozzle.json @@ -0,0 +1,149 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K2 Plus 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K2 Plus", + "gcode_flavor": "klipper", + "default_print_profile": "0.16mm Optimal @Creality K2 Plus 0.4 nozzle", + "nozzle_diameter": [ + "0.4" + ], + "printer_variant": "0.4", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "350", + "nozzle_type": "hardened_steel", + "nozzle_volume": "183", + "auxiliary_fan": "1", + "support_air_filtration": "1", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "30000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "30000", + "30000" + ], + "machine_max_acceleration_x": [ + "30000", + "30000" + ], + "machine_max_acceleration_y": [ + "30000", + "30000" + ], + "machine_max_acceleration_z": [ + "5000", + "5000" + ], + "machine_max_speed_e": [ + "50", + "50" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "20", + "20" + ], + "machine_max_jerk_z": [ + "5", + "5" + ], + "max_layer_height": [ + "0.3" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "1" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.8" + ], + "retract_length_toolchange": [ + "0" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "349" + ], + "enable_filament_ramming": "0", + "purge_in_prime_tower": "0", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "parking_pos_retraction": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "118", + "extruder_clearance_height_to_rod": "24", + "extruder_clearance_radius": "64", + "z_hop": [ + "0.4" + ], + "wipe_distance": [ + "2" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "0", + "default_filament_profile": [ + "Creality Generic PLA @K2-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600", + "machine_end_gcode": "END_PRINT", + "machine_pause_gcode": "PAUSE", + "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "scan_first_layer": "0", + "thumbnails_format": "PNG", + "thumbnails": [ + "300x300", + "96x96" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.6 nozzle.json new file mode 100644 index 0000000..52da4af --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.6 nozzle.json @@ -0,0 +1,149 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K2 Plus 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K2 Plus", + "gcode_flavor": "klipper", + "default_print_profile": "0.24mm Optimal @Creality K2 Plus 0.6 nozzle", + "nozzle_diameter": [ + "0.6" + ], + "printer_variant": "0.6", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "350", + "nozzle_type": "hardened_steel", + "nozzle_volume": "183", + "auxiliary_fan": "1", + "support_air_filtration": "1", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "30000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "30000", + "30000" + ], + "machine_max_acceleration_x": [ + "30000", + "30000" + ], + "machine_max_acceleration_y": [ + "30000", + "30000" + ], + "machine_max_acceleration_z": [ + "5000", + "5000" + ], + "machine_max_speed_e": [ + "50", + "50" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "20", + "20" + ], + "machine_max_jerk_z": [ + "5", + "5" + ], + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "1" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.5" + ], + "retract_length_toolchange": [ + "0" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "349" + ], + "enable_filament_ramming": "0", + "purge_in_prime_tower": "0", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "parking_pos_retraction": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "118", + "extruder_clearance_height_to_rod": "24", + "extruder_clearance_radius": "64", + "z_hop": [ + "0.4" + ], + "wipe_distance": [ + "1" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "0", + "default_filament_profile": [ + "Creality Generic PLA @K2-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600", + "machine_end_gcode": "END_PRINT", + "machine_pause_gcode": "PAUSE", + "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "scan_first_layer": "0", + "thumbnails_format": "PNG", + "thumbnails": [ + "300x300", + "96x96" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.8 nozzle.json new file mode 100644 index 0000000..82365d4 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K2 Plus 0.8 nozzle.json @@ -0,0 +1,149 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K2 Plus 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K2 Plus", + "gcode_flavor": "klipper", + "default_print_profile": "0.32mm Optimal @Creality K2 Plus 0.8 nozzle", + "nozzle_diameter": [ + "0.8" + ], + "printer_variant": "0.8", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "350", + "nozzle_type": "hardened_steel", + "nozzle_volume": "183", + "auxiliary_fan": "1", + "support_air_filtration": "1", + "support_multi_bed_types": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "30000", + "30000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "30000", + "30000" + ], + "machine_max_acceleration_x": [ + "30000", + "30000" + ], + "machine_max_acceleration_y": [ + "30000", + "30000" + ], + "machine_max_acceleration_z": [ + "5000", + "5000" + ], + "machine_max_speed_e": [ + "50", + "50" + ], + "machine_max_speed_x": [ + "800", + "800" + ], + "machine_max_speed_y": [ + "800", + "800" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "20", + "20" + ], + "machine_max_jerk_z": [ + "5", + "5" + ], + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "1" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.5" + ], + "retract_length_toolchange": [ + "0" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "349" + ], + "enable_filament_ramming": "0", + "purge_in_prime_tower": "0", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "parking_pos_retraction": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "118", + "extruder_clearance_height_to_rod": "24", + "extruder_clearance_radius": "64", + "z_hop": [ + "0.4" + ], + "wipe_distance": [ + "1" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "0", + "default_filament_profile": [ + "Creality Generic PLA @K2-all" + ], + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600", + "machine_end_gcode": "END_PRINT", + "machine_pause_gcode": "PAUSE", + "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "scan_first_layer": "0", + "thumbnails_format": "PNG", + "thumbnails": [ + "300x300", + "96x96" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality K2 Plus.json b/.config/OrcaSlicer/system/Creality/machine/Creality K2 Plus.json new file mode 100644 index 0000000..7cb68b5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality K2 Plus.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality K2 Plus", + "model_id": "Creality-K2-Plus", + "nozzle_diameter": "0.2;0.4;0.6;0.8", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_k2plus_buildplate_model.stl", + "bed_texture": "creality_k2plus_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic ABS @K2-all;Creality Generic ASA @K2-all;Creality Generic PETG @K2-all;Creality Generic PLA @K2-all;Creality Generic PLA High Speed @K2-all;Creality Generic PLA Matte @K2-all;Creality Generic PLA Silk @K2-all" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Sermoon V1 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/machine/Creality Sermoon V1 0.4 nozzle.json new file mode 100644 index 0000000..c819c98 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Sermoon V1 0.4 nozzle.json @@ -0,0 +1,73 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Sermoon V1 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Sermoon V1", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "default_print_profile": "0.20mm Standard @Creality Sermoon V1", + "nozzle_diameter": [ + "0.4" + ], + "retract_when_changing_layer": [ + "0" + ], + "retraction_length": [ + "0.8" + ], + "z_hop": [ + "0" + ], + "machine_max_acceleration_extruding": [ + "7000", + "500" + ], + "machine_max_acceleration_retracting": [ + "7000", + "1000" + ], + "machine_max_acceleration_x": [ + "7000", + "500" + ], + "machine_max_acceleration_y": [ + "7000", + "500" + ], + "machine_max_speed_x": [ + "7000", + "500" + ], + "machine_max_speed_y": [ + "7000", + "500" + ], + "layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}\n;AFTER_LAYER_CHANGE\n;Z>[layer_z]", + "machine_start_gcode": ";generated by SuperSlicer 1.5.0 on 2023-06-07 at 17:32:332\nG90 ; use absolute coordinates\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM140 S[bed_temperature_initial_layer] ; Set bed temp\nM104 S170 ; set temporary nozzle temp to prevent oozing during homing\nG28 ; Home\nM105 ; Report Temps\nM190 S[bed_temperature_initial_layer] ; Wait for bed to reach target\nM104 S[nozzle_temperature_initial_layer] ; Set hot end temp\nM105 ; Report Temps\nM109 S[nozzle_temperature_initial_layer] ; Wait for hot end to reach target\nM105 ; Report Temps\nM82 ; Absolute extrusion mode\n#G28 ; Home\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up\nG1 X173.0 Y10 Z0.28 F5000.0 ; Move to start position\nG1 X173.0 Y170.0 Z0.28 F1500.0 E15 ; Draw the first line\nG1 X173.4 Y170.0 Z0.28 F5000.0 ; Move to side a little\nG1 X173.4 Y40 Z0.28 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up\nG92 E0\nSTART_PRINT", + "machine_end_gcode": "M140 S0 ; Turn-off bed\nM107 ; Turn off cooling fan\nG91 ; Relative positioning\nG1 E-1 F2700 ; Retract\nG1 E-2 Z0.2 F2400 ; Retract and raise Z\nG1 X5 Y5 F3000 ; Wipe\nG1 Z0.95 ; Raise Z more\nG90 ; Absolute positioning\nG1 X10 Y160 ; Eject print\nM106 S0 ; Turn off fan\nM104 S0 ; Turn-off hot end\nM140 S0 ; Turn-off bed\n{ if max_layer_z < printable_height-10 }G1 Z{min(max_layer_z+70,printable_height-10)}; move print up {endif}; Eject print z (conditional)\nM84 X Y E ; Disable steppers except Z\nG92 E0 ; Reset Extruder\nM82;abs extrusion\nEND_PRINT", + "machine_pause_gcode": "M25 ;pause print\n; Sermoon V1 Marlin buffers commands, so flush with these G4 P10 commands\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\nG4 P10\n", + "printable_area": [ + "0x0", + "175x0", + "175x175", + "0x175" + ], + "print_host": "10.0.0.51", + "print_host_webui": "10.0.0.51", + "gcode_flavor": "marlin", + "thumbnails": [ + "64x64", + "400x400" + ], + "extruder_clearance_height_to_lid": "125", + "extruder_clearance_height_to_rod": "40", + "extruder_clearance_radius": "50", + "printable_height": "165", + "change_filament_gcode": "; S1 Pause For Filament change\nM125", + "nozzle_type": "brass", + "auxiliary_fan": "1" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/Creality Sermoon V1.json b/.config/OrcaSlicer/system/Creality/machine/Creality Sermoon V1.json new file mode 100644 index 0000000..b09dff7 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/Creality Sermoon V1.json @@ -0,0 +1,15 @@ +{ + "type": "machine_model", + "name": "Creality Sermoon V1", + "model_id": "Creality_Sermoon_V1", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "", + "bed_texture": "", + "z_hop_types": [ + "Spiral Lift" + ], + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS;Creality Generic TPU" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/fdm_creality_common.json b/.config/OrcaSlicer/system/Creality/machine/fdm_creality_common.json new file mode 100644 index 0000000..4b39e76 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/fdm_creality_common.json @@ -0,0 +1,139 @@ +{ + "type": "machine", + "name": "fdm_creality_common", + "from": "system", + "instantiation": "false", + "inherits": "fdm_machine_common", + "gcode_flavor": "marlin", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "500", + "500" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "printable_height": "250", + "extruder_clearance_radius": "47", + "extruder_clearance_height_to_rod": "34", + "extruder_clearance_height_to_lid": "34", + "printer_settings_id": "", + "printer_technology": "FFF", + "printer_variant": "0.4", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_length": [ + "5" + ], + "retract_length_toolchange": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retraction_speed": [ + "60" + ], + "deretraction_speed": [ + "40" + ], + "silent_mode": "0", + "single_extruder_multi_material": "1", + "change_filament_gcode": "", + "machine_pause_gcode": "M25 ;pause print", + "wipe": [ + "1" + ], + "default_filament_profile": [ + "Creality Generic PLA" + ], + "default_print_profile": "0.20mm Standard @Creality", + "bed_exclude_area": [ + "0x0" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "layer_change_gcode": "", + "scan_first_layer": "0", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/machine/fdm_machine_common.json b/.config/OrcaSlicer/system/Creality/machine/fdm_machine_common.json new file mode 100644 index 0000000..5226911 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/machine/fdm_machine_common.json @@ -0,0 +1,120 @@ +{ + "type": "machine", + "name": "fdm_machine_common", + "from": "system", + "instantiation": "false", + "printer_technology": "FFF", + "deretraction_speed": [ + "40" + ], + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "gcode_flavor": "marlin", + "silent_mode": "0", + "support_chamber_temp_control": "0", + "support_air_filtration": "0", + "machine_max_acceleration_e": [ + "5000" + ], + "machine_max_acceleration_extruding": [ + "10000" + ], + "machine_max_acceleration_retracting": [ + "1000" + ], + "machine_max_acceleration_x": [ + "10000" + ], + "machine_max_acceleration_y": [ + "10000" + ], + "machine_max_acceleration_z": [ + "500" + ], + "machine_max_speed_e": [ + "60" + ], + "machine_max_speed_x": [ + "500" + ], + "machine_max_speed_y": [ + "500" + ], + "machine_max_speed_z": [ + "10" + ], + "machine_max_jerk_e": [ + "5" + ], + "machine_max_jerk_x": [ + "8" + ], + "machine_max_jerk_y": [ + "8" + ], + "machine_max_jerk_z": [ + "0.4" + ], + "machine_min_extruding_rate": [ + "0" + ], + "machine_min_travel_rate": [ + "0" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "printable_height": "250", + "extruder_clearance_radius": "65", + "extruder_clearance_height_to_rod": "36", + "extruder_clearance_height_to_lid": "140", + "nozzle_diameter": [ + "0.4" + ], + "printer_settings_id": "", + "printer_variant": "0.4", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_length": [ + "1" + ], + "retract_length_toolchange": [ + "1" + ], + "z_hop": [ + "0" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retraction_speed": [ + "60" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "", + "wipe": [ + "1" + ], + "z_hop_types": "Normal Lift", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", + "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", + "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality CR-6 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality CR-6 0.2.json new file mode 100644 index 0000000..490f0d3 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality CR-6 0.2.json @@ -0,0 +1,24 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm SuperDetail @Creality CR-6 0.2", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "bottom_shell_layers": "5", + "initial_layer_line_width": "0.2", + "initial_layer_print_height": "0.12", + "inner_wall_line_width": "0.2", + "internal_solid_infill_line_width": "0.2", + "layer_height": "0.08", + "line_width": "0.2", + "outer_wall_line_width": "0.2", + "sparse_infill_line_width": "0.2", + "support_line_width": "0.2", + "top_shell_layers": "6", + "top_surface_line_width": "0.2", + "compatible_printers": [ + "Creality CR-6 SE 0.2 nozzle", + "Creality CR-6 Max 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.2.json new file mode 100644 index 0000000..7cec18d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.2.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm SuperDetail @Creality Ender5Pro (2019) 0.2", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_2", + "bottom_shell_layers": "9", + "top_shell_layers": "11", + "layer_height": "0.08", + "bridge_flow": "0.7" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.25.json b/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.25.json new file mode 100644 index 0000000..549411b --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.25.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm SuperDetail @Creality Ender5Pro (2019) 0.25", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_25", + "bottom_shell_layers": "9", + "top_shell_layers": "11", + "layer_height": "0.08", + "bridge_flow": "0.7" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3.json b/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3.json new file mode 100644 index 0000000..793afc2 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_3", + "bottom_shell_layers": "9", + "top_shell_layers": "11", + "layer_height": "0.08", + "bridge_flow": "0.7" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json new file mode 100644 index 0000000..e21dcea --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm SuperDetail @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "7", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "270", + "interface_shells": "0", + "ironing_flow": "8%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.08", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "9", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "default_jerk": "12", + "outer_wall_jerk": "8", + "inner_wall_jerk": "8", + "infill_jerk": "12", + "top_surface_jerk": "8", + "initial_layer_jerk": "8", + "travel_jerk": "12" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json new file mode 100644 index 0000000..0aaf929 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.22", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.22", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "30", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.08", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.25", + "inner_wall_speed": "150", + "wall_loops": "4", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.22", + "internal_solid_infill_speed": "150", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.2", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.22", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json new file mode 100644 index 0000000..ee060f2 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "7", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "350", + "interface_shells": "0", + "ironing_flow": "8%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.08", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "350", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "9", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "40", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-6 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-6 0.4.json new file mode 100644 index 0000000..1cb638b --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-6 0.4.json @@ -0,0 +1,22 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.10mm HighDetail @Creality 0.4 CR-6 0.4", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.3", + "inner_wall_line_width": "0.3", + "internal_solid_infill_line_width": "0.3", + "layer_height": "0.1", + "line_width": "0.3", + "outer_wall_line_width": "0.3", + "sparse_infill_line_width": "0.3", + "support_line_width": "0.3", + "top_shell_layers": "4", + "top_surface_line_width": "0.3", + "compatible_printers": [ + "Creality CR-6 SE 0.4 nozzle", + "Creality CR-6 Max 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-M4.json b/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-M4.json new file mode 100644 index 0000000..fe86b26 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality CR-M4.json @@ -0,0 +1,103 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.10mm HighDetail @Creality CR-M4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "15", + "brim_width": ".4", + "brim_object_gap": "0.1", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.44", + "initial_layer_print_height": "0.1", + "infill_combination": "0", + "sparse_infill_line_width": "0.4", + "infill_wall_overlap": "30%", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "layer_height": "0.1", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.4", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "nearest", + "skirt_distance": "3", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "1.33", + "support_interface_speed": "25", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "60", + "support_threshold_angle": "60", + "support_object_xy_distance": "0.8", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "inital_travel_speed": "25", + "initial_layer_infill_speed": "15", + "outer_wall_speed": "25", + "inner_wall_speed": "25", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "100", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality CR-M4 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.2.json new file mode 100644 index 0000000..f250aea --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.2.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.10mm HighDetail @Creality Ender5Pro (2019) 0.2", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_2", + "bottom_shell_layers": "7", + "top_shell_layers": "9", + "layer_height": "0.1", + "bridge_flow": "0.7" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.25.json b/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.25.json new file mode 100644 index 0000000..b1206a2 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.25.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.10mm HighDetail @Creality Ender5Pro (2019) 0.25", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_25", + "bottom_shell_layers": "7", + "top_shell_layers": "9", + "layer_height": "0.1", + "bridge_flow": "0.7" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.3.json b/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.3.json new file mode 100644 index 0000000..9538235 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.3.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.10mm HighDetail @Creality Ender5Pro (2019) 0.3", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_3", + "bottom_shell_layers": "7", + "top_shell_layers": "9", + "layer_height": "0.1", + "bridge_flow": "0.7" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json new file mode 100644 index 0000000..8a1fda4 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.10mm HighDetail @Creality K2 Plus 0.2 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.22", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.22", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "30", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.1", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.25", + "inner_wall_speed": "150", + "wall_loops": "4", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.22", + "internal_solid_infill_speed": "150", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.2", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.22", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.2.json new file mode 100644 index 0000000..35f2965 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.2.json @@ -0,0 +1,24 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Detail @Creality CR-6 0.2", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "bottom_shell_layers": "5", + "initial_layer_line_width": "0.2", + "initial_layer_print_height": "0.12", + "inner_wall_line_width": "0.2", + "internal_solid_infill_line_width": "0.2", + "layer_height": "0.12", + "line_width": "0.2", + "outer_wall_line_width": "0.2", + "sparse_infill_line_width": "0.2", + "support_line_width": "0.2", + "top_shell_layers": "6", + "top_surface_line_width": "0.2", + "compatible_printers": [ + "Creality CR-6 SE 0.2 nozzle", + "Creality CR-6 Max 0.2 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.4.json new file mode 100644 index 0000000..44679ac --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality CR-6 0.4.json @@ -0,0 +1,17 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Detail @Creality 0.4 CR-6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.4", + "inner_wall_line_width": "0.4", + "layer_height": "0.12", + "sparse_infill_line_width": "0.4", + "top_shell_layers": "4", + "compatible_printers": [ + "Creality CR-6 SE 0.4 nozzle", + "Creality CR-6 Max 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.2.json new file mode 100644 index 0000000..3735306 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.2.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.2", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_2", + "bottom_shell_layers": "6", + "top_shell_layers": "7", + "layer_height": "0.12", + "bridge_flow": "0.7" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.25.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.25.json new file mode 100644 index 0000000..c0657fa --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.25.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.25", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_25", + "bottom_shell_layers": "6", + "top_shell_layers": "7", + "layer_height": "0.12", + "bridge_flow": "0.7" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.3.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.3.json new file mode 100644 index 0000000..02eed0a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.3.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.3", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_3", + "bottom_shell_layers": "6", + "top_shell_layers": "7", + "layer_height": "0.12", + "bridge_flow": "0.7" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.5.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.5.json new file mode 100644 index 0000000..b8014d3 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality Ender5Pro (2019) 0.5.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.5", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_5", + "bottom_shell_layers": "6", + "top_shell_layers": "7", + "layer_height": "0.12", + "bridge_flow": "0.7" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json new file mode 100644 index 0000000..edbd1dc --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Detail @Creality K2 Plus 0.2 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.22", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.22", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "30", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.25", + "inner_wall_speed": "150", + "wall_loops": "4", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.22", + "internal_solid_infill_speed": "150", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.2", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.22", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json new file mode 100644 index 0000000..842b073 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Detail @Creality K2 Plus 0.4 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "300", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "40", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10Max.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10Max.json new file mode 100644 index 0000000..1b4cb0f --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10Max.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality CR10Max", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality CR-10 Max 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json new file mode 100644 index 0000000..be3df15 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality CR10SE 0.2", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.25", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.25", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "4", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.25", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10SE 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json new file mode 100644 index 0000000..6bd0765 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality CR10SE 0.4", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "4", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10 SE 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json new file mode 100644 index 0000000..2eeca51 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality CR10SE 0.6", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.65", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.65", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.65", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.65", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.65", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "4", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.65", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10 SE 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json new file mode 100644 index 0000000..5e0d570 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality CR10SE 0.8", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.85", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.85", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "4", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.85", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10 SE 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.2.json new file mode 100644 index 0000000..4d13a37 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.2", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.4.json new file mode 100644 index 0000000..1ad9ee0 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.6.json new file mode 100644 index 0000000..388dc35 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.66", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.54", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.6", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.8.json new file mode 100644 index 0000000..5f415e0 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.7", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.8", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json new file mode 100644 index 0000000..149b060 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3 Pro 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.2", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json new file mode 100644 index 0000000..21b1ea9 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3 Pro 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json new file mode 100644 index 0000000..51d36a3 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3 Pro 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.66", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.54", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.6", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json new file mode 100644 index 0000000..b930085 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3 Pro 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.7", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.8", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2.json new file mode 100644 index 0000000..482510d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3V2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V2 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json new file mode 100644 index 0000000..91766d0 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3V2Neo", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V2 Neo 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json new file mode 100644 index 0000000..57d4c8a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender-3 V3", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Ender-3 V3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.12", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3KE.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3KE.json new file mode 100644 index 0000000..8e3b8b6 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3KE.json @@ -0,0 +1,120 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3V3KE", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.05", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "4000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "4", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "200", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "300", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "role_based_wipe_speed" : "0", + "wipe_speed": "200", + "prime_tower_width": "60", + "xy_hole_compensation": "0.025", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "accel_to_decel_enable": "0", + "compatible_printers": [ + "Creality Ender-3 V3 KE 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json new file mode 100644 index 0000000..9265f5b --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender-3 V3 Plus", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Ender-3 V3 Plus 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.12", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "300", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.6", + "travel_acceleration": "8000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json new file mode 100644 index 0000000..110c3ed --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3V3SE 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.22", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.26", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.26", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.22", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "4", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.22", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json new file mode 100644 index 0000000..0f61222 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3V3SE 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "4", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json new file mode 100644 index 0000000..a5e16d4 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3V3SE 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.62", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.66", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.65", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.62", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.58", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "4", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.6 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json new file mode 100644 index 0000000..9cd2830 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3V3SE 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.82", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.86", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.86", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.78", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "4", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.8 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json new file mode 100644 index 0000000..96e4873 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender5Pro (2019)", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 Pro (2019) 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json new file mode 100644 index 0000000..d091be7 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json @@ -0,0 +1,126 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.12", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "270", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.22", + "support_bottom_z_distance": "0.24", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "default_jerk": "12", + "outer_wall_jerk": "8", + "inner_wall_jerk": "8", + "infill_jerk": "12", + "top_surface_jerk": "8", + "initial_layer_jerk": "8", + "travel_jerk": "12" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json new file mode 100644 index 0000000..ffb4b24 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality K1 (0.4 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K1 (0.4 nozzle)" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.12", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json new file mode 100644 index 0000000..15a6490 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json @@ -0,0 +1,119 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality K1 SE", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.12", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "precise_outer_wall": "1" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json new file mode 100644 index 0000000..4201d9d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality K1C", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.12", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json new file mode 100644 index 0000000..7716091 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality K1Max (0.4 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.12", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "270", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 Max (0.4 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json new file mode 100644 index 0000000..cb5884d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.14mm Optimal @Creality K2 Plus 0.2 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.22", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.22", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "30", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.14", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.25", + "inner_wall_speed": "150", + "wall_loops": "4", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.22", + "internal_solid_infill_speed": "150", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.2", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.22", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.15mm Detail @Creality CR-M4.json b/.config/OrcaSlicer/system/Creality/process/0.15mm Detail @Creality CR-M4.json new file mode 100644 index 0000000..10711b0 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.15mm Detail @Creality CR-M4.json @@ -0,0 +1,103 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Detail @Creality CR-M4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "15", + "brim_width": ".4", + "brim_object_gap": "0.1", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.44", + "initial_layer_print_height": "0.15", + "infill_combination": "0", + "sparse_infill_line_width": "0.4", + "infill_wall_overlap": "30%", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "layer_height": "0.15", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.4", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "nearest", + "skirt_distance": "3", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "1.33", + "support_interface_speed": "25", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "60", + "support_threshold_angle": "60", + "support_object_xy_distance": "0.8", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "inital_travel_speed": "25", + "initial_layer_infill_speed": "15", + "outer_wall_speed": "25", + "inner_wall_speed": "25", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "100", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality CR-M4 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality CR10Max.json b/.config/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality CR10Max.json new file mode 100644 index 0000000..b1eefe7 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality CR10Max.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Optimal @Creality CR10Max", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.15", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality CR-10 Max 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender3V2.json b/.config/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender3V2.json new file mode 100644 index 0000000..efbbca9 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender3V2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Optimal @Creality Ender3V2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.15", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V2 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json b/.config/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json new file mode 100644 index 0000000..021375e --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Optimal @Creality Ender5Pro (2019)", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.15", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 Pro (2019) 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.2.json new file mode 100644 index 0000000..0e97389 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.2.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality CR-6 0.2", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "bottom_shell_layers": "6", + "initial_layer_line_width": "0.2", + "initial_layer_print_height": "0.16", + "inner_wall_line_width": "0.2", + "internal_solid_infill_line_width": "0.2", + "layer_height": "0.16", + "line_width": "0.2", + "outer_wall_line_width": "0.2", + "sparse_infill_line_width": "0.2", + "support_line_width": "0.2", + "top_surface_line_width": "0.2", + "compatible_printers": [ + "Creality CR-6 SE 0.2 nozzle", + "Creality CR-6 Max 0.2 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json new file mode 100644 index 0000000..3bfa0d4 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json @@ -0,0 +1,52 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality CR-6 0.4", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "adaptive_layer_height": "1", + "brim_object_gap": "0", + "brim_width": "0", + "default_acceleration": "0", + "detect_thin_wall": "1", + "elefant_foot_compensation": "0.1", + "filename_format": "[input_filename_base].gcode", + "infill_wall_overlap": "25%", + "initial_layer_acceleration": "0", + "initial_layer_infill_speed": "35%", + "initial_layer_line_width": "0.42", + "initial_layer_speed": "35%", + "inner_wall_acceleration": "0", + "internal_solid_infill_line_width": "0", + "internal_solid_infill_speed": "50", + "ironing_type": "no ironing", + "layer_height": "0.16", + "line_width": "0.45", + "minimum_sparse_infill_area": "10", + "outer_wall_line_width": "0.45", + "outer_wall_speed": "40", + "prime_tower_width": "60", + "skirt_height": "2", + "skirt_loops": "2", + "sparse_infill_speed": "60", + "support_base_pattern_spacing": "0.2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_interface_top_layers": "3", + "support_line_width": "0.38", + "support_object_xy_distance": "60%", + "support_speed": "40", + "support_style": "grid", + "support_threshold_angle": "30", + "support_top_z_distance": "0.15", + "top_surface_acceleration": "0", + "travel_acceleration": "0", + "tree_support_branch_angle": "40", + "wall_loops": "2", + "compatible_printers": [ + "Creality CR-6 SE 0.4 nozzle", + "Creality CR-6 Max 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.6.json new file mode 100644 index 0000000..1dbdc16 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR-6 0.6.json @@ -0,0 +1,24 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality CR-6 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "bottom_shell_layers": "5", + "initial_layer_line_width": "0.6", + "initial_layer_print_height": "0.3", + "inner_wall_line_width": "0.6", + "internal_solid_infill_line_width": "0.6", + "layer_height": "0.16", + "line_width": "0.6", + "outer_wall_line_width": "0.6", + "sparse_infill_line_width": "0.6", + "support_line_width": "0.6", + "top_shell_layers": "7", + "top_surface_line_width": "0.6", + "compatible_printers": [ + "Creality CR-6 SE 0.6 nozzle", + "Creality CR-6 Max 0.6 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json new file mode 100644 index 0000000..f4d62a5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality CR10SE 0.2", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.25", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.25", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.25", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10 SE 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json new file mode 100644 index 0000000..2e4809f --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality CR10SE 0.4", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10 SE 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json new file mode 100644 index 0000000..b2f286a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality CR10SE 0.6", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.65", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.65", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.63", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.63", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.63", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10 SE 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json new file mode 100644 index 0000000..534f569 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality CR10SE 0.8", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.85", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.85", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.85", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10 SE 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10V2.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10V2.json new file mode 100644 index 0000000..e897ed1 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality CR10V2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality CR10V2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality CR-10 V2 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json new file mode 100644 index 0000000..30f0b27 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.2", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json new file mode 100644 index 0000000..138ee4b --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json new file mode 100644 index 0000000..d3e5e40 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.66", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.54", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.6", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json new file mode 100644 index 0000000..eddc531 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.7", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.8", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json new file mode 100644 index 0000000..2a06bb5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3 Pro 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.2", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json new file mode 100644 index 0000000..646101a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3 Pro 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json new file mode 100644 index 0000000..a65f9b5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3 Pro 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.66", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.54", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.6", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json new file mode 100644 index 0000000..7d4496b --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3 Pro 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.7", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.8", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1.json new file mode 100644 index 0000000..b13a3bc --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3S1", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json new file mode 100644 index 0000000..3598264 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3S1Plus 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.25", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.2", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Plus 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json new file mode 100644 index 0000000..dc3d53d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3S1Plus 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Plus 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json new file mode 100644 index 0000000..40ecebc --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3S1Plus 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.65", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.65", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.65", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.65", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.58", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.6", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json new file mode 100644 index 0000000..9af147c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3S1Plus 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.85", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.78", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.8", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json new file mode 100644 index 0000000..00c879a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3S1Pro", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Pro 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json new file mode 100644 index 0000000..7569e60 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3V2Neo", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.16", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V2 Neo 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json new file mode 100644 index 0000000..2c72981 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender-3 V3", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Ender-3 V3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.16", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.16", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json new file mode 100644 index 0000000..d0357c0 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json @@ -0,0 +1,120 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3V3KE", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.05", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "4000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "200", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "300", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "role_based_wipe_speed" : "0", + "wipe_speed": "200", + "prime_tower_width": "60", + "xy_hole_compensation": "0.025", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "accel_to_decel_enable": "0", + "compatible_printers": [ + "Creality Ender-3 V3 KE 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json new file mode 100644 index 0000000..8101302 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender-3 V3 Plus", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Ender-3 V3 Plus 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.16", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "300", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.16", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "8000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json new file mode 100644 index 0000000..0ad999c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3V3SE 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.22", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.26", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.26", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.22", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.22", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json new file mode 100644 index 0000000..99a7c20 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3V3SE 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json new file mode 100644 index 0000000..f7d17cb --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3V3SE 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.62", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.66", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.65", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.62", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.58", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.6 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json new file mode 100644 index 0000000..284101f --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3V3SE 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.82", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.86", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.86", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.78", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.8 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5.json new file mode 100644 index 0000000..47e76af --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender5", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Plus.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Plus.json new file mode 100644 index 0000000..8cd7007 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Plus.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender5Plus", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 Plus 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.2.json new file mode 100644 index 0000000..b83910a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.2.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.2", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_2", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "layer_height": "0.16", + "bridge_flow": "0.85" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.25.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.25.json new file mode 100644 index 0000000..81aead0 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.25.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.25", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_25", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "layer_height": "0.16", + "bridge_flow": "0.85" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.3.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.3.json new file mode 100644 index 0000000..65394ae --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.3.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.3", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_3", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "layer_height": "0.16", + "bridge_flow": "0.85" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.5.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.5.json new file mode 100644 index 0000000..b665f95 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.5.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.5", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_5", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "layer_height": "0.16", + "bridge_flow": "0.85" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.6.json new file mode 100644 index 0000000..6df9739 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5Pro (2019) 0.6.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender5Pro (2019) 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_6", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "0.85", + "layer_height": "0.16" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S.json new file mode 100644 index 0000000..3a49495 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender5S", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S1.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S1.json new file mode 100644 index 0000000..04a5128 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender5S1.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender5S1", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 S1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender6.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender6.json new file mode 100644 index 0000000..2426364 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Ender6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-6 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json new file mode 100644 index 0000000..8b30e2b --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json @@ -0,0 +1,119 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.16", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.16", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json new file mode 100644 index 0000000..42d05db --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality K1 (0.4 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K1 (0.4 nozzle)" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.16", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.16", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json new file mode 100644 index 0000000..17e94d7 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json @@ -0,0 +1,119 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality K1 SE", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.16", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.16", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "precise_outer_wall": "1" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json new file mode 100644 index 0000000..c1a798d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality K1C", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.16", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.16", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json new file mode 100644 index 0000000..f55aa62 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality K1Max (0.4 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.16", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "270", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.16", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 Max (0.4 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json new file mode 100644 index 0000000..09af514 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality K2 Plus 0.4 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "300", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.16", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "40", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Sermoon V1.json b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Sermoon V1.json new file mode 100644 index 0000000..4fbf1b2 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.16mm Optimal @Creality Sermoon V1.json @@ -0,0 +1,112 @@ +{ + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "65%", + "bottom_shell_thickness": "0.6", + "bridge_acceleration": "50%", + "bridge_speed": "120", + "brim_type": "no_brim", + "brim_width": "4", + "default_acceleration": "4000", + "default_jerk": "5", + "detect_thin_wall": "1", + "dont_filter_internal_bridges": "limited", + "elefant_foot_compensation": "0.3", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_support": "1", + "exclude_object": "1", + "from": "User", + "gap_infill_speed": "195", + "gcode_comments": "1", + "infill_combination": "0", + "infill_wall_overlap": "30%", + "inherits": "fdm_process_creality_common", + "initial_layer_acceleration": "3000", + "initial_layer_infill_speed": "75", + "initial_layer_jerk": "5", + "initial_layer_line_width": "0.61", + "initial_layer_speed": "58", + "initial_layer_travel_speed": "150", + "inner_wall_acceleration": "6000", + "inner_wall_line_width": "0.61", + "inner_wall_speed": "195", + "internal_bridge_support_thickness": "0.8", + "internal_solid_infill_line_width": "0.32", + "internal_solid_infill_speed": "195", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "45", + "is_custom_defined": "0", + "layer_height": "0.16", + "line_width": "0.61", + "max_bridge_length": "20", + "max_travel_detour_distance": "200", + "min_bead_width": "80%", + "min_feature_size": "20%", + "minimum_sparse_infill_area": "8", + "name": "0.16mm Optimal @Creality Sermoon V1", + "instantiation": "true", + "only_one_wall_first_layer": "1", + "only_one_wall_top": "1", + "outer_wall_acceleration": "4000", + "outer_wall_jerk": "5", + "outer_wall_line_width": "0.61", + "outer_wall_speed": "195", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "40", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "precise_outer_wall": "1", + "reduce_crossing_wall": "1", + "reduce_infill_retraction": "1", + "print_settings_id": "", + "scarf_joint_flow_ratio": "0.95", + "seam_gap": "6%", + "seam_slope_min_length": "12", + "seam_slope_steps": "6", + "seam_slope_type": "external", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "1", + "sparse_infill_density": "4%", + "sparse_infill_line_width": "0.4", + "sparse_infill_pattern": "crosshatch", + "sparse_infill_speed": "195", + "support_base_pattern": "hollow", + "support_base_pattern_spacing": "7", + "support_bottom_z_distance": "0.7", + "support_critical_regions_only": "0", + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": "2", + "support_interface_speed": "175", + "support_line_width": "0.56", + "support_object_xy_distance": "1.2", + "support_on_build_plate_only": "1", + "support_speed": "195", + "support_style": "tree_slim", + "support_threshold_angle": "30", + "support_top_z_distance": "0.28", + "support_type": "tree(auto)", + "top_shell_layers": "3", + "top_shell_thickness": "0.84", + "top_solid_infill_flow_ratio": "0.95", + "top_surface_acceleration": "5000", + "top_surface_jerk": "5", + "top_surface_line_width": "0.32", + "top_surface_speed": "195", + "travel_acceleration": "4000", + "travel_speed": "195", + "tree_support_branch_angle": "50", + "tree_support_branch_diameter": "2", + "tree_support_branch_distance": "10", + "tree_support_wall_count": "1", + "wall_loops": "2", + "tree_support_adaptive_layer_height": "0", + "version": "2.0.0.0", + "wall_infill_order": "infill/inner wall/outer wall", + "xy_hole_compensation": "0.05", + "xy_contour_compensation": "-0.05", + "independent_support_layer_height": "0", + "compatible_printers": [ + "Creality Sermoon V1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json new file mode 100644 index 0000000..21399d9 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.18mm Detail @Creality K2 Plus 0.6 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.6 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.65", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.18", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.4.json new file mode 100644 index 0000000..6626135 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.4.json @@ -0,0 +1,13 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality CR-6 0.4", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "top_shell_layers": "4", + "compatible_printers": [ + "Creality CR-6 SE 0.4 nozzle", + "Creality CR-6 Max 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.6.json new file mode 100644 index 0000000..2f34f8c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-6 0.6.json @@ -0,0 +1,21 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality CR-6 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.3", + "inner_wall_line_width": "0.66", + "internal_solid_infill_line_width": "0.66", + "line_width": "0.66", + "outer_wall_line_width": "0.66", + "sparse_infill_line_width": "0.66", + "support_line_width": "0.54", + "top_surface_line_width": "0.66", + "compatible_printers": [ + "Creality CR-6 SE 0.6 nozzle", + "Creality CR-6 Max 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-M4.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-M4.json new file mode 100644 index 0000000..bf0484a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR-M4.json @@ -0,0 +1,103 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality CR-M4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "15", + "brim_width": ".4", + "brim_object_gap": "0.1", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.44", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.4", + "infill_wall_overlap": "30%", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.4", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "nearest", + "skirt_distance": "3", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "1.33", + "support_interface_speed": "25", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "60", + "support_threshold_angle": "60", + "support_object_xy_distance": "0.8", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "inital_travel_speed": "25", + "initial_layer_infill_speed": "15", + "outer_wall_speed": "25", + "inner_wall_speed": "25", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "100", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality CR-M4 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10Max.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10Max.json new file mode 100644 index 0000000..eaae996 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10Max.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality CR10Max", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality CR-10 Max 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json new file mode 100644 index 0000000..85b2bf3 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality CR10SE 0.2", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.25", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.25", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.25", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10 SE 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json new file mode 100644 index 0000000..dad7492 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality CR10SE 0.4", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10 SE 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json new file mode 100644 index 0000000..5f07b63 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality CR10SE 0.6", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.65", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.65", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.65", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.65", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.65", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.65", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10 SE 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json new file mode 100644 index 0000000..8667571 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality CR10SE 0.8", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.85", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.85", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.85", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10 SE 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10V2.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10V2.json new file mode 100644 index 0000000..cabab4e --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality CR10V2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality CR10V2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality CR-10 V2 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json new file mode 100644 index 0000000..fdd6b77 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json @@ -0,0 +1,261 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_common_klipper", + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "25%", + "acceleration_limit_mess_enable": "0", + "ai_infill": "0", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0.6", + "bottom_solid_infill_flow_ratio": "0.95", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "2000", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "50", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0", + "brim_type": "auto_brim", + "brim_width": "1.2", + "compatible_printers": [ + "Creality Ender-5 Max 0.4 nozzle" + ], + "counterbore_hole_bridging": "none", + "default_acceleration": "15000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_overhang_speed": "1", + "enable_prime_tower": "0", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "0", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "everywhere", + "gap_infill_speed": "100", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_direction": "45", + "infill_jerk": "20", + "infill_wall_overlap": "30", + "initial_layer_acceleration": "2000", + "initial_layer_infill_speed": "105", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.55", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "5", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "interface_shells": "0", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "100%", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "monotonic", + "internal_solid_infill_speed": "500", + "ironing_angle": "-1", + "ironing_flow": "15%", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.1", + "ironing_speed": "44", + "ironing_type": "no ironing", + "is_infill_first": "0", + "layer_height": "0.2", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "10", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "0", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "5", + "outer_wall_line_width": "0.4", + "outer_wall_speed": "300", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "overhang_speed_classic": "0", + "precise_outer_wall": "0", + "prime_tower_brim_width": "3", + "prime_tower_enhance_type": "chamfer", + "prime_tower_width": "60", + "prime_volume": "45", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "100", + "raft_first_layer_expansion": "2", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "100%", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "0", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "0", + "seam_slope_min_length": "20", + "seam_slope_start_height": "0", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "skirt_distance": "5", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "5", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"", + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "10", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.55", + "sparse_infill_pattern": "zig-zag", + "sparse_infill_speed": "500", + "speed_limit_to_height_enable": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "-5", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.45", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "0", + "support_remove_small_overhang": "1", + "support_speed": "200", + "support_style": "default", + "support_threshold_angle": "30", + "support_top_z_distance": "0.2", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_shell_layers": "5", + "top_shell_thickness": "1", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "5000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonic", + "top_surface_speed": "300", + "travel_acceleration": "15000", + "travel_jerk": "20", + "travel_speed": "500", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "30", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "5", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "0", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "10", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "20", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "arachne", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "100%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "0", + "wipe_tower_extra_spacing": "100%", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.2.json new file mode 100644 index 0000000..d563ac7 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.20", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.2", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.4.json new file mode 100644 index 0000000..16c51aa --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.6.json new file mode 100644 index 0000000..84e7cfa --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.66", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.54", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.6", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.8.json new file mode 100644 index 0000000..806cd6c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.7", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.8", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json new file mode 100644 index 0000000..7f04b6d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3 Pro 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.20", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.2", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json new file mode 100644 index 0000000..44d614a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3 Pro 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json new file mode 100644 index 0000000..9c99cbd --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3 Pro 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.66", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.54", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.6", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json new file mode 100644 index 0000000..e26c792 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3 Pro 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.7", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.8", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3.json new file mode 100644 index 0000000..eebce8f --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1.json new file mode 100644 index 0000000..11bc906 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3S1", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json new file mode 100644 index 0000000..e2daf57 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3S1Plus 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.2", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.2", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Plus 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json new file mode 100644 index 0000000..a430f4b --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3S1Plus 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Plus 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json new file mode 100644 index 0000000..a0dab46 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3S1Plus 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.65", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.65", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.65", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.6", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.58", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.6", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json new file mode 100644 index 0000000..e26b27d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3S1Plus 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.8", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.78", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.8", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json new file mode 100644 index 0000000..325bc27 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3S1Pro", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Pro 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2.json new file mode 100644 index 0000000..6b416ee --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3V2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V2 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json new file mode 100644 index 0000000..b0fe6db --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3V2Neo", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V2 Neo 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json new file mode 100644 index 0000000..95d923b --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender-3 V3", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Ender-3 V3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3KE.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3KE.json new file mode 100644 index 0000000..6321b57 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3KE.json @@ -0,0 +1,121 @@ + +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3V3KE", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.05", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "4000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "200", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "300", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "role_based_wipe_speed": "0", + "wipe_speed": "200", + "prime_tower_width": "60", + "xy_hole_compensation": "0.025", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "accel_to_decel_enable": "0", + "compatible_printers": [ + "Creality Ender-3 V3 KE 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json new file mode 100644 index 0000000..e6219dc --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender-3 V3 Plus", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Ender-3 V3 Plus 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "300", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "8000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json new file mode 100644 index 0000000..fc612d8 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3V3SE 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.22", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.26", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.26", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.22", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.22", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json new file mode 100644 index 0000000..bda107b --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3V3SE 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json new file mode 100644 index 0000000..443b814 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3V3SE 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.62", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.66", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.65", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.62", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.58", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.6 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json new file mode 100644 index 0000000..ee7d3eb --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3V3SE 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.82", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.86", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.86", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.78", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.8 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5.json new file mode 100644 index 0000000..5757e91 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender5", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Plus.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Plus.json new file mode 100644 index 0000000..358ef73 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Plus.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender5Plus", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 Plus 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.25.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.25.json new file mode 100644 index 0000000..d36e7a4 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.25.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.25", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_25", + "bottom_shell_layers": "4", + "top_shell_layers": "5", + "layer_height": "0.20" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.3.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.3.json new file mode 100644 index 0000000..f00ede6 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.3.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.3", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_3", + "bottom_shell_layers": "4", + "top_shell_layers": "5", + "layer_height": "0.20" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.5.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.5.json new file mode 100644 index 0000000..6712100 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.5.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.5", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_5", + "bottom_shell_layers": "4", + "top_shell_layers": "5", + "layer_height": "0.20" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.6.json new file mode 100644 index 0000000..0351219 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.6.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_6", + "bottom_shell_layers": "4", + "top_shell_layers": "4", + "layer_height": "0.20" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.8.json new file mode 100644 index 0000000..ba94de8 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019) 0.8.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender5Pro (2019) 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_8", + "bottom_shell_layers": "4", + "top_shell_layers": "5", + "layer_height": "0.20" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json new file mode 100644 index 0000000..b5a0207 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender5Pro (2019)", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 Pro (2019) 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S.json new file mode 100644 index 0000000..9ef334c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender5S", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S1.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S1.json new file mode 100644 index 0000000..3bbf579 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender5S1.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender5S1", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 S1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender6.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender6.json new file mode 100644 index 0000000..a0e1a0e --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Ender6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-6 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json new file mode 100644 index 0000000..023cf2e --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json @@ -0,0 +1,126 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "230", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "270", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "default_jerk": "12", + "outer_wall_jerk": "8", + "inner_wall_jerk": "8", + "infill_jerk": "12", + "top_surface_jerk": "8", + "initial_layer_jerk": "8", + "travel_jerk": "12" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json new file mode 100644 index 0000000..347f834 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality K1 (0.4 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K1 (0.4 nozzle)" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json new file mode 100644 index 0000000..a2dee99 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json @@ -0,0 +1,112 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality K1 SE", + "renamed_from": "0.20mm Fast @Creality K1 SE 0.4", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "100", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "1000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "200", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "250", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "2000", + "top_surface_speed": "150", + "top_shell_layers": "4", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "initial_layer_travel_speed": "100%", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "precise_outer_wall": "1" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json new file mode 100644 index 0000000..51b286a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality K1C", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json new file mode 100644 index 0000000..b5e1a9e --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality K1Max (0.4 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "270", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 Max (0.4 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json new file mode 100644 index 0000000..d209350 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality K2 Plus 0.4 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "270", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "40", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Sermoon V1.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Sermoon V1.json new file mode 100644 index 0000000..9cb78e5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Standard @Creality Sermoon V1.json @@ -0,0 +1,112 @@ +{ + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "65%", + "bottom_shell_thickness": "0.6", + "bridge_acceleration": "50%", + "bridge_speed": "120", + "brim_type": "no_brim", + "brim_width": "4", + "default_acceleration": "6000", + "default_jerk": "5", + "detect_thin_wall": "1", + "dont_filter_internal_bridges": "limited", + "elefant_foot_compensation": "0.3", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_support": "1", + "exclude_object": "1", + "from": "User", + "gap_infill_speed": "195", + "gcode_comments": "1", + "infill_combination": "0", + "infill_wall_overlap": "30%", + "inherits": "fdm_process_creality_common", + "initial_layer_acceleration": "3000", + "initial_layer_infill_speed": "75", + "initial_layer_jerk": "5", + "initial_layer_line_width": "0.61", + "initial_layer_speed": "58", + "initial_layer_travel_speed": "150", + "inner_wall_acceleration": "6000", + "inner_wall_line_width": "0.61", + "inner_wall_speed": "195", + "internal_bridge_support_thickness": "0.8", + "internal_solid_infill_line_width": "0.32", + "internal_solid_infill_speed": "195", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "45", + "is_custom_defined": "0", + "layer_height": "0.20", + "line_width": "0.61", + "max_bridge_length": "20", + "max_travel_detour_distance": "200", + "min_bead_width": "80%", + "min_feature_size": "20%", + "minimum_sparse_infill_area": "8", + "name": "0.20mm Standard @Creality Sermoon V1", + "instantiation": "true", + "only_one_wall_first_layer": "1", + "only_one_wall_top": "1", + "outer_wall_acceleration": "4000", + "outer_wall_jerk": "5", + "outer_wall_line_width": "0.61", + "outer_wall_speed": "150", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "40", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "precise_outer_wall": "1", + "reduce_crossing_wall": "1", + "reduce_infill_retraction": "1", + "print_settings_id": "", + "scarf_joint_flow_ratio": "0.95", + "seam_gap": "6%", + "seam_slope_min_length": "12", + "seam_slope_steps": "6", + "seam_slope_type": "external", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "1", + "sparse_infill_density": "4%", + "sparse_infill_line_width": "0.4", + "sparse_infill_pattern": "crosshatch", + "sparse_infill_speed": "195", + "support_base_pattern": "hollow", + "support_base_pattern_spacing": "7", + "support_bottom_z_distance": "0.7", + "support_critical_regions_only": "0", + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": "2", + "support_interface_speed": "175", + "support_line_width": "0.56", + "support_object_xy_distance": "1.2", + "support_on_build_plate_only": "1", + "support_speed": "195", + "support_style": "tree_slim", + "support_threshold_angle": "30", + "support_top_z_distance": "0.28", + "support_type": "tree(auto)", + "top_shell_layers": "3", + "top_shell_thickness": "0.80", + "top_solid_infill_flow_ratio": "0.95", + "top_surface_acceleration": "6000", + "top_surface_jerk": "5", + "top_surface_line_width": "0.32", + "top_surface_speed": "195", + "travel_acceleration": "6000", + "travel_speed": "195", + "tree_support_branch_angle": "50", + "tree_support_branch_diameter": "2", + "tree_support_branch_distance": "10", + "tree_support_wall_count": "1", + "wall_loops": "2", + "tree_support_adaptive_layer_height": "0", + "version": "2.0.0.0", + "wall_infill_order": "infill/inner wall/outer wall", + "xy_hole_compensation": "0.05", + "xy_contour_compensation": "-0.05", + "independent_support_layer_height": "0", + "compatible_printers": [ + "Creality Sermoon V1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json new file mode 100644 index 0000000..575476a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json @@ -0,0 +1,263 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_common_klipper", + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "25%", + "acceleration_limit_mess_enable": "0", + "ai_infill": "0", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0.6", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "2000", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "50", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0", + "brim_type": "auto_brim", + "brim_width": "1.2", + "compatible_printers": [ + "Creality Ender-5 Max 0.4 nozzle" + ], + "counterbore_hole_bridging": "none", + "default_acceleration": "20000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_overhang_speed": "1", + "enable_prime_tower": "0", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "0", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "everywhere", + "gap_infill_speed": "100", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_direction": "45", + "infill_jerk": "20", + "infill_wall_overlap": "25", + "initial_layer_acceleration": "2000", + "initial_layer_infill_speed": "200", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.55", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "100", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "20000", + "inner_wall_jerk": "5", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "500", + "interface_shells": "0", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "100%", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "monotonic", + "internal_solid_infill_speed": "500", + "ironing_angle": "-1", + "ironing_flow": "15%", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.1", + "ironing_speed": "44", + "ironing_type": "no ironing", + "is_infill_first": "0", + "layer_height": "0.2", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "10", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "0", + "ooze_prevention": "0", + "outer_wall_acceleration": "15000", + "outer_wall_jerk": "5", + "outer_wall_line_width": "0.4", + "outer_wall_speed": "350", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "overhang_speed_classic": "0", + "precise_outer_wall": "0", + "prime_tower_brim_width": "3", + "prime_tower_enhance_type": "chamfer", + "prime_tower_width": "60", + "prime_volume": "45", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "100", + "raft_first_layer_expansion": "2", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "100%", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "0", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "0", + "seam_slope_min_length": "20", + "seam_slope_start_height": "0", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "skirt_distance": "5", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "5", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"", + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "10", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.55", + "sparse_infill_pattern": "zig-zag", + "sparse_infill_speed": "500", + "speed_limit_to_height_enable": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "-5", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.45", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "0", + "support_remove_small_overhang": "1", + "support_speed": "200", + "support_style": "default", + "support_threshold_angle": "30", + "support_top_z_distance": "0.2", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_shell_layers": "5", + "top_shell_thickness": "1", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "15000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonic", + "top_surface_speed": "350", + "travel_acceleration": "20000", + "travel_jerk": "20", + "travel_speed": "500", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "30", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "5", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "0", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "10", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "20", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "arachne", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "100%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "0", + "wipe_tower_extra_spacing": "100%", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json new file mode 100644 index 0000000..c953b04 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Detail @Creality K2 Plus 0.8 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.8 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.82", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.3", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.4.json new file mode 100644 index 0000000..185ef5a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.4.json @@ -0,0 +1,22 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality CR-6 0.4", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.4", + "inner_wall_line_width": "0.4", + "internal_solid_infill_line_width": "0.5", + "layer_height": "0.24", + "line_width": "0.5", + "outer_wall_line_width": "0.5", + "sparse_infill_line_width": "0.4", + "support_line_width": "0.5", + "top_shell_layers": "4", + "top_surface_line_width": "0.5", + "compatible_printers": [ + "Creality CR-6 SE 0.4 nozzle", + "Creality CR-6 Max 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.6.json new file mode 100644 index 0000000..ecf0d19 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR-6 0.6.json @@ -0,0 +1,22 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality CR-6 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.6", + "initial_layer_print_height": "0.3", + "inner_wall_line_width": "0.6", + "internal_solid_infill_line_width": "0.6", + "layer_heigth": "0.24", + "line_width": "0.6", + "outer_wall_line_width": "0.6", + "sparse_infill_line_width": "0.6", + "support_line_width": "0.6", + "top_surface_line_width": "0.6", + "compatible_printers": [ + "Creality CR-6 SE 0.6 nozzle", + "Creality CR-6 Max 0.6 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10Max.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10Max.json new file mode 100644 index 0000000..97d962c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10Max.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality CR10Max", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.45", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality CR-10 Max 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json new file mode 100644 index 0000000..0a17a8c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality CR10SE 0.2", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.25", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.25", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.25", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10 SE 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json new file mode 100644 index 0000000..8819084 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality CR10SE 0.4", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10 SE 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json new file mode 100644 index 0000000..0949770 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality CR10SE 0.6", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.65", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.65", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.65", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.65", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.65", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.65", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10 SE 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json new file mode 100644 index 0000000..0a40eb1 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality CR10SE 0.8", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "5000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.85", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.85", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.85", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "compatible_printers": [ + "Creality CR-10 SE 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.2.json new file mode 100644 index 0000000..efe6bfd --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.2", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.4.json new file mode 100644 index 0000000..a2bd32e --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.6", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.6.json new file mode 100644 index 0000000..3f5c0f3 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.66", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.54", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.6", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.8.json new file mode 100644 index 0000000..6d61dd9 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json new file mode 100644 index 0000000..cf88482 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3 Pro 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.2", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json new file mode 100644 index 0000000..78bdc71 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3 Pro 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.6", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json new file mode 100644 index 0000000..952dbc0 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3 Pro 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.66", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.54", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.6", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json new file mode 100644 index 0000000..09ef09f --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3 Pro 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json new file mode 100644 index 0000000..8744bec --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3S1Plus 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "10%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.2", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.2", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "25", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Plus 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json new file mode 100644 index 0000000..6b44412 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3S1Plus 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "10%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "25", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Plus 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json new file mode 100644 index 0000000..484ecef --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3S1Plus 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.65", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.65", + "infill_direction": "45", + "sparse_infill_density": "10%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.65", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.6", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.58", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.6", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "25", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json new file mode 100644 index 0000000..e66e047 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3S1Plus 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "10%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.2", + "infill_combination": "1", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "1", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.8", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.78", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.8", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "25", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2.json new file mode 100644 index 0000000..137370f --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3V2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.45", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V2 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json new file mode 100644 index 0000000..0b2ca12 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3V2Neo", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.45", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V2 Neo 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json new file mode 100644 index 0000000..4f211c6 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender-3 V3", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Ender-3 V3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3KE.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3KE.json new file mode 100644 index 0000000..12a55c4 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3KE.json @@ -0,0 +1,120 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3V3KE", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "65", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "5000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.05", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "4000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "44%", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "200", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "200", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "300", + "top_surface_speed": "250", + "gap_infill_speed": "200", + "sparse_infill_speed": "300", + "travel_speed": "400", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "role_based_wipe_speed" : "0", + "wipe_speed": "200", + "prime_tower_width": "60", + "xy_hole_compensation": "0.025", + "xy_contour_compensation": "0", + "default_jerk": "7", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "infill_jerk": "7", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "travel_jerk": "7", + "accel_to_decel_enable": "0", + "compatible_printers": [ + "Creality Ender-3 V3 KE 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json new file mode 100644 index 0000000..ebb0bca --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender-3 V3 Plus", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Ender-3 V3 Plus 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "8000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json new file mode 100644 index 0000000..9ee7a0c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3V3SE 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.22", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.26", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.26", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.22", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.22", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json new file mode 100644 index 0000000..fd1adb8 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3V3SE 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json new file mode 100644 index 0000000..62dc21f --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3V3SE 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.62", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.66", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.65", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.62", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.58", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.6 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json new file mode 100644 index 0000000..a7db0d2 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json @@ -0,0 +1,111 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3V3SE 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.82", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.86", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.86", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.78", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.8 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.3.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.3.json new file mode 100644 index 0000000..29fcdd9 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.3.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.3", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_3", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "layer_height": "0.24" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.5.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.5.json new file mode 100644 index 0000000..3f1dfc5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.5.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.5", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_5", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "layer_height": "0.24" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.6.json new file mode 100644 index 0000000..3b9a2fc --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.6.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_6", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "layer_height": "0.24" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.8.json new file mode 100644 index 0000000..eddca34 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019) 0.8.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_8", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "layer_height": "0.24" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json new file mode 100644 index 0000000..1c4cfa0 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender5Pro (2019)", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.45", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 Pro (2019) 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json new file mode 100644 index 0000000..0ae0cd8 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json @@ -0,0 +1,126 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "230", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "270", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "default_jerk": "12", + "outer_wall_jerk": "8", + "inner_wall_jerk": "8", + "infill_jerk": "12", + "top_surface_jerk": "8", + "initial_layer_jerk": "8", + "travel_jerk": "12" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json new file mode 100644 index 0000000..9084109 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality K1 (0.4 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K1 (0.4 nozzle)" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json new file mode 100644 index 0000000..768c4c5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json @@ -0,0 +1,119 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality K1 SE", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "precise_outer_wall": "1" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json new file mode 100644 index 0000000..621f32c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality K1C", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "300", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "500", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "100", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json new file mode 100644 index 0000000..4a6e91c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality K1Max (0.4 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.24", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "270", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 Max (0.4 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json new file mode 100644 index 0000000..3220276 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality K2 Plus 0.4 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "250", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "40", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality CR-6 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality CR-6 0.8.json new file mode 100644 index 0000000..be0b893 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality CR-6 0.8.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Optimal @Creality CR-6 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.8", + "initial_layer_print_height": "0.4", + "inner_wall_line_width": "0.8", + "internal_solid_infill_line_width": "0.8", + "layer_height": "0.24", + "line_width": "0.8", + "outer_wall_line_width": "0.8", + "sparse_infill_line_width": "0.8", + "support_line_width": "0.8", + "top_shell_layers": "4", + "top_surface_line_width": "0.8", + "compatible_printers": [ + "Creality CR-6 SE 0.8 nozzle", + "Creality CR-6 Max 0.8 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json new file mode 100644 index 0000000..326fe32 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Optimal @Creality Ender-3 V3", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.24", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality Ender-3 V3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json new file mode 100644 index 0000000..f7c4313 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Optimal @Creality Ender-3 V3 Plus", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.24", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "8000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality Ender-3 V3 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json new file mode 100644 index 0000000..31adad8 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json @@ -0,0 +1,125 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Optimal @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.6 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.24", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "default_jerk": "12", + "outer_wall_jerk": "8", + "inner_wall_jerk": "8", + "infill_jerk": "12", + "top_surface_jerk": "8", + "initial_layer_jerk": "8", + "travel_jerk": "12" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json new file mode 100644 index 0000000..e0568e0 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Optimal @Creality K1 (0.6 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.24", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 (0.6 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json new file mode 100644 index 0000000..92bf6c5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Optimal @Creality K1C", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.24", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1C 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json new file mode 100644 index 0000000..9d359a6 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Optimal @Creality K1Max (0.6 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.24", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 Max (0.6 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json new file mode 100644 index 0000000..2747831 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Optimal @Creality K2 Plus 0.6 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.6 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.65", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm Standard @Creality Sermoon V1.json b/.config/OrcaSlicer/system/Creality/process/0.28mm Standard @Creality Sermoon V1.json new file mode 100644 index 0000000..ee45c33 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm Standard @Creality Sermoon V1.json @@ -0,0 +1,112 @@ +{ + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "65%", + "bottom_shell_thickness": "0.6", + "bridge_acceleration": "50%", + "bridge_speed": "120", + "brim_type": "no_brim", + "brim_width": "4", + "default_acceleration": "6000", + "default_jerk": "5", + "detect_thin_wall": "1", + "dont_filter_internal_bridges": "limited", + "elefant_foot_compensation": "0.3", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_support": "1", + "exclude_object": "1", + "from": "User", + "gap_infill_speed": "195", + "gcode_comments": "1", + "infill_combination": "0", + "infill_wall_overlap": "30%", + "inherits": "fdm_process_creality_common", + "initial_layer_acceleration": "3000", + "initial_layer_infill_speed": "75", + "initial_layer_jerk": "5", + "initial_layer_line_width": "0.61", + "initial_layer_speed": "58", + "initial_layer_travel_speed": "150", + "inner_wall_acceleration": "6000", + "inner_wall_line_width": "0.61", + "inner_wall_speed": "195", + "internal_bridge_support_thickness": "0.8", + "internal_solid_infill_line_width": "0.32", + "internal_solid_infill_speed": "195", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "45", + "is_custom_defined": "0", + "layer_height": "0.28", + "line_width": "0.61", + "max_bridge_length": "20", + "max_travel_detour_distance": "200", + "min_bead_width": "80%", + "min_feature_size": "20%", + "minimum_sparse_infill_area": "8", + "name": "0.28mm Standard @Creality Sermoon V1", + "instantiation": "true", + "only_one_wall_first_layer": "1", + "only_one_wall_top": "1", + "outer_wall_acceleration": "4000", + "outer_wall_jerk": "5", + "outer_wall_line_width": "0.61", + "outer_wall_speed": "195", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "40", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "precise_outer_wall": "1", + "reduce_crossing_wall": "1", + "reduce_infill_retraction": "1", + "print_settings_id": "", + "scarf_joint_flow_ratio": "0.95", + "seam_gap": "6%", + "seam_slope_min_length": "12", + "seam_slope_steps": "6", + "seam_slope_type": "external", + "skirt_loops": "0", + "slowdown_for_curled_perimeters": "1", + "sparse_infill_density": "4%", + "sparse_infill_line_width": "0.4", + "sparse_infill_pattern": "crosshatch", + "sparse_infill_speed": "195", + "support_base_pattern": "hollow", + "support_base_pattern_spacing": "7", + "support_bottom_z_distance": "0.7", + "support_critical_regions_only": "0", + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": "2", + "support_interface_speed": "175", + "support_line_width": "0.56", + "support_object_xy_distance": "1.2", + "support_on_build_plate_only": "1", + "support_speed": "195", + "support_style": "tree_slim", + "support_threshold_angle": "30", + "support_top_z_distance": "0.28", + "support_type": "tree(auto)", + "top_shell_layers": "3", + "top_shell_thickness": "0.84", + "top_solid_infill_flow_ratio": "0.95", + "top_surface_acceleration": "6000", + "top_surface_jerk": "5", + "top_surface_line_width": "0.32", + "top_surface_speed": "195", + "travel_acceleration": "6000", + "travel_speed": "195", + "tree_support_branch_angle": "50", + "tree_support_branch_diameter": "2", + "tree_support_branch_distance": "10", + "tree_support_wall_count": "1", + "wall_loops": "2", + "tree_support_adaptive_layer_height": "0", + "version": "2.0.0.0", + "wall_infill_order": "infill/inner wall/outer wall", + "xy_hole_compensation": "0.05", + "xy_contour_compensation": "-0.05", + "independent_support_layer_height": "0", + "compatible_printers": [ + "Creality Sermoon V1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.4.json new file mode 100644 index 0000000..fea20f7 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.4.json @@ -0,0 +1,18 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm SuperDraft @Creality CR-6 0.4", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.4", + "initial_layer_print_height": "0.28", + "inner_wall_line_width": "0.4", + "layer_height": "0.28", + "sparse_infill_line_width": "0.4", + "top_shell_layers": "4", + "compatible_printers": [ + "Creality CR-6 SE 0.4 nozzle", + "Creality CR-6 Max 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.6.json new file mode 100644 index 0000000..d4774fc --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality CR-6 0.6.json @@ -0,0 +1,22 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm SuperDraft @Creality CR-6 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.6", + "inner_wall_line_width": "0.6", + "internal_solid_infill_line_width": "0.6", + "line_width": "0.6", + "layer_height": "0.28", + "outer_wall_line_width": "0.6", + "sparse_infill_line_width": "0.6", + "support_line_width": "0.6", + "top_surface_line_width": "0.6", + "top_shell_layers": "4", + "compatible_printers": [ + "Creality CR-6 SE 0.6 nozzle", + "Creality CR-6 Max 0.6 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json new file mode 100644 index 0000000..b44dc55 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Draft @Creality Ender3 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.28", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.2", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json new file mode 100644 index 0000000..6542991 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Draft @Creality Ender3 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.28", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json new file mode 100644 index 0000000..86f7bbf --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Draft @Creality Ender3 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.28", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.66", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.54", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.6", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json new file mode 100644 index 0000000..897e180 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Draft @Creality Ender3 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.28", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.7", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.8", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json new file mode 100644 index 0000000..5046ffa --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Draft @Creality Ender3 Pro 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.28", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.2", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json new file mode 100644 index 0000000..91250c7 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Draft @Creality Ender3 Pro 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.28", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json new file mode 100644 index 0000000..7868df4 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Draft @Creality Ender3 Pro 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.28", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.66", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.54", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.6", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json new file mode 100644 index 0000000..5ff1f6d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Draft @Creality Ender3 Pro 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.28", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.7", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.8", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 Pro 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.5.json b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.5.json new file mode 100644 index 0000000..76c4c5e --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.5.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 0.5", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_5", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "layer_height": "0.28" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.6.json new file mode 100644 index 0000000..837d684 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.6.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_6", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "layer_height": "0.28" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.8.json new file mode 100644 index 0000000..9ffd6db --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 0.8.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_8", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "layer_height": "0.28" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0.json b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0.json new file mode 100644 index 0000000..a2d6093 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_1_0", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "layer_height": "0.28" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json new file mode 100644 index 0000000..c93d65b --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "200", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.28", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "200", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "40", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json new file mode 100644 index 0000000..3486fa9 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.30mm Standard @Creality Ender-3 V3", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.3", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality Ender-3 V3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json new file mode 100644 index 0000000..5321a63 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.30mm Standard @Creality Ender-3 V3 Plus", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.3", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "8000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality Ender-3 V3 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json new file mode 100644 index 0000000..b960981 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json @@ -0,0 +1,125 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.30mm Standard @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.6 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.3", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "default_jerk": "12", + "outer_wall_jerk": "8", + "inner_wall_jerk": "8", + "infill_jerk": "12", + "top_surface_jerk": "8", + "initial_layer_jerk": "8", + "travel_jerk": "12" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json new file mode 100644 index 0000000..e004c3a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.30mm Standard @Creality K1 (0.6 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.3", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 (0.6 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json new file mode 100644 index 0000000..7cdbee7 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.30mm Standard @Creality K1C", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.3", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1C 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json new file mode 100644 index 0000000..0065c97 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.30mm Standard @Creality K1Max (0.6 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.3", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 Max (0.6 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json new file mode 100644 index 0000000..6207414 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.30mm Standard @Creality K2 Plus 0.6 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.6 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.65", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.3", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.32mm Chunky @Creality CR-6 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.32mm Chunky @Creality CR-6 0.6.json new file mode 100644 index 0000000..878680a --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.32mm Chunky @Creality CR-6 0.6.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.32mm Chunky @Creality CR-6 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.6", + "initial_layer_print_height": "0.32", + "inner_wall_line_width": "0.6", + "internal_solid_infill_line_width": "0.6", + "layer_height": "0.32", + "line_width": "0.6", + "outer_wall_line_width": "0.6", + "sparse_infill_line_width": "0.6", + "support_line_width": "0.6", + "top_shell_layers": "4", + "top_surface_line_width": "0.6", + "compatible_printers": [ + "Creality CR-6 SE 0.6 nozzle", + "Creality CR-6 Max 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json new file mode 100644 index 0000000..5a7ee8c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.32mm Optimal @Creality K1 (0.8 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.7", + "initial_layer_print_height": "0.32", + "initial_layer_speed": "35", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.32", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.85", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "55", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.82", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 (0.8 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json new file mode 100644 index 0000000..98fac8f --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.32mm Optimal @Creality K1C", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.7", + "initial_layer_print_height": "0.32", + "initial_layer_speed": "35", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.32", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.85", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "55", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.82", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1C 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json new file mode 100644 index 0000000..89b73e4 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.32mm Optimal @Creality K1Max (0.8 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.7", + "initial_layer_print_height": "0.32", + "initial_layer_speed": "35", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.32", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.85", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "55", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.82", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 Max (0.8 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json new file mode 100644 index 0000000..eeeb765 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.32mm Optimal @Creality K2 Plus 0.8 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.8 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.82", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.32", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.3", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.32mm Standard @Creality CR-6 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.32mm Standard @Creality CR-6 0.8.json new file mode 100644 index 0000000..16078c5 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.32mm Standard @Creality CR-6 0.8.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.32mm Standard @Creality CR-6 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.8", + "initial_layer_print_height": "0.32", + "inner_wall_line_width": "0.8", + "internal_solid_infill_line_width": "0.8", + "layer_height": "0.32", + "line_width": "0.8", + "outer_wall_line_width": "0.8", + "sparse_infill_line_width": "0.8", + "support_line_width": "0.8", + "top_shell_layers": "4", + "top_surface_line_width": "0.8", + "compatible_printers": [ + "Creality CR-6 SE 0.8 nozzle", + "Creality CR-6 Max 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.5.json b/.config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.5.json new file mode 100644 index 0000000..3e73410 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.5.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.36mm Chunky @Creality Ender5Pro (2019) 0.5", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_5", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "layer_height": "0.36" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.6.json new file mode 100644 index 0000000..7c81913 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.6.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.36mm Chunky @Creality Ender5Pro (2019) 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_6", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "layer_height": "0.36" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.8.json new file mode 100644 index 0000000..e1a07cf --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 0.8.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.36mm Chunky @Creality Ender5Pro (2019) 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_0_8", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "layer_height": "0.36" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 1.0.json b/.config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 1.0.json new file mode 100644 index 0000000..48d513d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.36mm Chunky @Creality Ender5Pro (2019) 1.0.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.36mm Chunky @Creality Ender5Pro (2019) 1.0", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common_1_0", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "layer_height": "0.36" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json new file mode 100644 index 0000000..3b5645d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.36mm Draft @Creality Ender-3 V3", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.36", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.36", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality Ender-3 V3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json new file mode 100644 index 0000000..84a6cc4 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.36mm Draft @Creality Ender-3 V3 Plus", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.36", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.36", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "8000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality Ender-3 V3 Plus 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json new file mode 100644 index 0000000..ca37492 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json @@ -0,0 +1,125 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.36mm Draft @Creality Hi", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality Hi 0.6 nozzle" + ], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.36", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.36", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "default_jerk": "12", + "outer_wall_jerk": "8", + "inner_wall_jerk": "8", + "infill_jerk": "12", + "top_surface_jerk": "8", + "initial_layer_jerk": "8", + "travel_jerk": "12" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json new file mode 100644 index 0000000..eab36cf --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.36mm Draft @Creality K1 (0.6 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.36", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.36", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 (0.6 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json new file mode 100644 index 0000000..90b3efd --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.36mm Draft @Creality K1C", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.36", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.36", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1C 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json new file mode 100644 index 0000000..84ff502 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.36mm Draft @Creality K1Max (0.6 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.36", + "initial_layer_speed": "50", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.36", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.62", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 Max (0.6 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json new file mode 100644 index 0000000..30de178 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.36mm Draft @Creality K2 Plus 0.6 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.6 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.65", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.36", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.36mm SuperChunky @Creality CR-6 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.36mm SuperChunky @Creality CR-6 0.6.json new file mode 100644 index 0000000..1e0a67d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.36mm SuperChunky @Creality CR-6 0.6.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.36mm SuperChunky @Creality CR-6 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.6", + "initial_layer_print_height": "0.3", + "inner_wall_line_width": "0.6", + "internal_solid_infill_line_width": "0.6", + "layer_height": "0.36", + "line_width": "0.6", + "outer_wall_line_width": "0.6", + "sparse_infill_line_width": "0.6", + "support_line_width": "0.6", + "top_shell_layers": "4", + "top_surface_line_width": "0.6", + "compatible_printers": [ + "Creality CR-6 SE 0.6 nozzle", + "Creality CR-6 Max 0.6 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.40mm Draft @Creality CR-6 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.40mm Draft @Creality CR-6 0.8.json new file mode 100644 index 0000000..ce75cc9 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.40mm Draft @Creality CR-6 0.8.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.40mm Draft @Creality CR-6 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.8", + "initial_layer_print_height": "0.4", + "inner_wall_line_width": "0.8", + "internal_solid_infill_line_width": "0.8", + "layer_height": "0.4", + "line_width": "0.8", + "outer_wall_line_width": "0.8", + "sparse_infill_line_width": "0.8", + "support_line_width": "0.8", + "top_shell_layers": "4", + "top_surface_line_width": "0.8", + "compatible_printers": [ + "Creality CR-6 SE 0.8 nozzle", + "Creality CR-6 Max 0.8 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json new file mode 100644 index 0000000..990930d --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.40mm Standard @Creality K1 (0.8 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.7", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "35", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.4", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.85", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "55", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.82", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 (0.8 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json new file mode 100644 index 0000000..3b8a82e --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.40mm Standard @Creality K1C", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.7", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "35", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.4", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.85", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "55", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.82", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1C 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json new file mode 100644 index 0000000..f26b553 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.40mm Standard @Creality K1Max (0.8 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.7", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "35", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.4", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.85", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "55", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.82", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 Max (0.8 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json new file mode 100644 index 0000000..593e118 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.40mm Standard @Creality K2 Plus 0.8 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.8 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.82", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.4", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.3", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json new file mode 100644 index 0000000..2b765d1 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.6 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.65", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.42", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.44mm SuperExtraChunky @Creality CR-6 0.6.json b/.config/OrcaSlicer/system/Creality/process/0.44mm SuperExtraChunky @Creality CR-6 0.6.json new file mode 100644 index 0000000..2b933ba --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.44mm SuperExtraChunky @Creality CR-6 0.6.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.44mm SuperExtraChunky @Creality CR-6 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.6", + "initial_layer_print_height": "0.3", + "inner_wall_line_width": "0.6", + "internal_solid_infill_line_width": "0.6", + "layer_height": "0.44", + "line_width": "0.6", + "outer_wall_line_width": "0.6", + "sparse_infill_line_width": "0.6", + "support_line_width": "0.6", + "top_shell_layers": "4", + "top_surface_line_width": "0.6", + "compatible_printers": [ + "Creality CR-6 SE 0.6 nozzle", + "Creality CR-6 Max 0.6 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.48mm Chunky @Creality CR-6 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.48mm Chunky @Creality CR-6 0.8.json new file mode 100644 index 0000000..e63b479 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.48mm Chunky @Creality CR-6 0.8.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.48mm Chunky @Creality CR-6 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.8", + "initial_layer_print_height": "0.48", + "inner_wall_line_width": "0.8", + "internal_solid_infill_line_width": "0.8", + "layer_height": "0.4", + "line_width": "0.8", + "outer_wall_line_width": "0.8", + "sparse_infill_line_width": "0.8", + "support_line_width": "0.8", + "top_shell_layers": "4", + "top_surface_line_width": "0.8", + "compatible_printers": [ + "Creality CR-6 SE 0.8 nozzle", + "Creality CR-6 Max 0.8 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality CR-6 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality CR-6 0.8.json new file mode 100644 index 0000000..d39aa26 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality CR-6 0.8.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.48mm Draft @Creality CR-6 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.8", + "initial_layer_print_height": "0.48", + "inner_wall_line_width": "0.8", + "internal_solid_infill_line_width": "0.8", + "layer_height": "0.48", + "line_width": "0.8", + "outer_wall_line_width": "0.8", + "sparse_infill_line_width": "0.8", + "support_line_width": "0.8", + "top_shell_layers": "4", + "top_surface_line_width": "0.8", + "compatible_printers": [ + "Creality CR-6 SE 0.8 nozzle", + "Creality CR-6 Max 0.8 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json new file mode 100644 index 0000000..e1ae636 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.48mm Draft @Creality K1 (0.8 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.7", + "initial_layer_print_height": "0.48", + "initial_layer_speed": "35", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.48", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.85", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "55", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.82", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 (0.8 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json new file mode 100644 index 0000000..16b2432 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.48mm Draft @Creality K1C", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.7", + "initial_layer_print_height": "0.48", + "initial_layer_speed": "35", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.48", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.85", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "55", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.82", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1C 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json b/.config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json new file mode 100644 index 0000000..44047d1 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json @@ -0,0 +1,117 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.48mm Draft @Creality K1Max (0.8 nozzle)", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "30", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.7", + "initial_layer_print_height": "0.48", + "initial_layer_speed": "35", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "150", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.48", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.85", + "inner_wall_speed": "150", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_entire_loop": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "55", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.82", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "5000", + "top_surface_speed": "150", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0", + "compatible_printers": [ + "Creality K1 Max (0.8 nozzle)" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json new file mode 100644 index 0000000..32090d3 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.48mm Draft @Creality K2 Plus 0.8 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.8 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.82", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.48", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.3", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/0.56mm SuperChunky @Creality CR-6 0.8.json b/.config/OrcaSlicer/system/Creality/process/0.56mm SuperChunky @Creality CR-6 0.8.json new file mode 100644 index 0000000..e823088 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.56mm SuperChunky @Creality CR-6 0.8.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.56mm SuperChunky @Creality CR-6 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_creality_common", + "initial_layer_line_width": "0.8", + "initial_layer_print_height": "0.4", + "inner_wall_line_width": "0.8", + "internal_solid_infill_line_width": "0.8", + "layer_height": "0.56", + "line_width": "0.8", + "outer_wall_line_width": "0.8", + "sparse_infill_line_width": "0.8", + "support_line_width": "0.8", + "top_shell_layers": "4", + "top_surface_line_width": "0.8", + "compatible_printers": [ + "Creality CR-6 SE 0.8 nozzle", + "Creality CR-6 Max 0.8 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json b/.config/OrcaSlicer/system/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json new file mode 100644 index 0000000..6fe45f8 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.8 nozzle" + ], + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.82", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.56", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "precise_outer_wall": "1", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.3", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/fdm_process_common.json b/.config/OrcaSlicer/system/Creality/process/fdm_process_common.json new file mode 100644 index 0000000..1da14b4 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/fdm_process_common.json @@ -0,0 +1,70 @@ +{ + "type": "process", + "name": "fdm_process_common", + "from": "system", + "instantiation": "false", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "compatible_printers": [], + "print_sequence": "by layer", + "default_acceleration": "10000", + "bridge_no_support": "0", + "elefant_foot_compensation": "0.1", + "outer_wall_line_width": "0.4", + "outer_wall_speed": "120", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "20", + "gap_infill_speed": "30", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "sparse_infill_speed": "50", + "interface_shells": "0", + "detect_overhang_wall": "0", + "reduce_infill_retraction": "0", + "filename_format": "{input_filename_base}.gcode", + "wall_loops": "3", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "40", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "nearest", + "skirt_distance": "2", + "skirt_height": "2", + "minimum_sparse_infill_area": "0", + "internal_solid_infill_line_width": "0.45", + "internal_solid_infill_speed": "40", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_filament": "0", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_interface_loop_pattern": "0", + "support_interface_top_layers": "2", + "support_interface_spacing": "0", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.5", + "detect_thin_wall": "0", + "top_surface_line_width": "0.4", + "top_surface_speed": "30", + "travel_speed": "400", + "enable_prime_tower": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/process/fdm_process_common_klipper.json b/.config/OrcaSlicer/system/Creality/process/fdm_process_common_klipper.json new file mode 100644 index 0000000..303888b --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/fdm_process_common_klipper.json @@ -0,0 +1,16 @@ +{ + "type": "process", + "name": "fdm_process_common_klipper", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "false", + "default_jerk": "9", + "initial_layer_jerk": "9", + "outer_wall_jerk": "7", + "infill_jerk": "12", + "travel_jerk": "12", + "inner_wall_jerk": "7", + "top_surface_jerk": "7", + "exclude_object": "1" + +} diff --git a/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common.json b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common.json new file mode 100644 index 0000000..6709f4c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common.json @@ -0,0 +1,104 @@ +{ + "type": "process", + "name": "fdm_process_creality_common", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_common", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0" +} diff --git a/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_2.json b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_2.json new file mode 100644 index 0000000..eb28a2b --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_2.json @@ -0,0 +1,20 @@ +{ + "type": "process", + "name": "fdm_process_creality_common_0_2", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_creality_common", + "outer_wall_line_width": "0.2", + "line_width": "0.22", + "initial_layer_line_width": "0.2", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.18", + "top_surface_line_width": "0.2", + "initial_layer_print_height": "0.12", + "wall_loops": "6", + "compatible_printers": [ + "Creality Ender-5 Pro (2019) 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_25.json b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_25.json new file mode 100644 index 0000000..94b5cb9 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_25.json @@ -0,0 +1,20 @@ +{ + "type": "process", + "name": "fdm_process_creality_common_0_25", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_creality_common", + "outer_wall_line_width": "0.26", + "line_width": "0.28", + "initial_layer_line_width": "0.26", + "sparse_infill_line_width": "0.28", + "inner_wall_line_width": "0.28", + "internal_solid_infill_line_width": "0.28", + "support_line_width": "0.23", + "top_surface_line_width": "0.25", + "initial_layer_print_height": "0.12", + "wall_loops": "5", + "compatible_printers": [ + "Creality Ender-5 Pro (2019) 0.25 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_3.json b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_3.json new file mode 100644 index 0000000..26d05e8 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_3.json @@ -0,0 +1,19 @@ +{ + "type": "process", + "name": "fdm_process_creality_common_0_3", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_creality_common", + "outer_wall_line_width": "0.31", + "line_width": "0.33", + "initial_layer_line_width": "0.31", + "sparse_infill_line_width": "0.33", + "inner_wall_line_width": "0.33", + "internal_solid_infill_line_width": "0.33", + "support_line_width": "0.27", + "top_surface_line_width": "0.3", + "wall_loops": "4", + "compatible_printers": [ + "Creality Ender-5 Pro (2019) 0.3 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_5.json b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_5.json new file mode 100644 index 0000000..26a11b4 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_5.json @@ -0,0 +1,19 @@ +{ + "type": "process", + "name": "fdm_process_creality_common_0_5", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_creality_common", + "outer_wall_line_width": "0.52", + "line_width": "0.55", + "initial_layer_line_width": "0.52", + "sparse_infill_line_width": "0.55", + "inner_wall_line_width": "0.55", + "internal_solid_infill_line_width": "0.55", + "support_line_width": "0.45", + "top_surface_line_width": "0.5", + "wall_loops": "3", + "compatible_printers": [ + "Creality Ender-5 Pro (2019) 0.5 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_6.json b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_6.json new file mode 100644 index 0000000..ca184e0 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_6.json @@ -0,0 +1,19 @@ +{ + "type": "process", + "name": "fdm_process_creality_common_0_6", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_creality_common", + "outer_wall_line_width": "0.63", + "line_width": "0.66", + "initial_layer_line_width": "0.63", + "sparse_infill_line_width": "0.66", + "inner_wall_line_width": "0.66", + "internal_solid_infill_line_width": "0.66", + "support_line_width": "0.54", + "top_surface_line_width": "0.6", + "wall_loops": "2", + "compatible_printers": [ + "Creality Ender-5 Pro (2019) 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_8.json b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_8.json new file mode 100644 index 0000000..b7f6a48 --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_0_8.json @@ -0,0 +1,20 @@ +{ + "type": "process", + "name": "fdm_process_creality_common_0_8", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_creality_common", + "outer_wall_line_width": "0.84", + "line_width": "0.88", + "initial_layer_line_width": "0.84", + "sparse_infill_line_width": "0.88", + "inner_wall_line_width": "0.88", + "internal_solid_infill_line_width": "0.88", + "support_line_width": "0.72", + "top_surface_line_width": "0.8", + "initial_layer_print_height": "0.32", + "wall_loops": "2", + "compatible_printers": [ + "Creality Ender-5 Pro (2019) 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_1_0.json b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_1_0.json new file mode 100644 index 0000000..926033c --- /dev/null +++ b/.config/OrcaSlicer/system/Creality/process/fdm_process_creality_common_1_0.json @@ -0,0 +1,20 @@ +{ + "type": "process", + "name": "fdm_process_creality_common_1_0", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_creality_common", + "outer_wall_line_width": "1.05", + "line_width": "1.10", + "initial_layer_line_width": "1.05", + "sparse_infill_line_width": "1.10", + "inner_wall_line_width": "1.10", + "internal_solid_infill_line_width": "1.10", + "support_line_width": "0.9", + "top_surface_line_width": "1.0", + "initial_layer_print_height": "0.32", + "wall_loops": "1", + "compatible_printers": [ + "Creality Ender-5 Pro (2019) 1.0 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom.json b/.config/OrcaSlicer/system/Custom.json new file mode 100644 index 0000000..e760d4b --- /dev/null +++ b/.config/OrcaSlicer/system/Custom.json @@ -0,0 +1,274 @@ +{ + "name": "Custom Printer", + "version": "02.03.00.03", + "force_update": "0", + "description": "My configurations", + "machine_model_list": [ + { + "name": "Generic Klipper Printer", + "sub_path": "machine/MyKlipper.json" + }, + { + "name": "Generic Marlin Printer", + "sub_path": "machine/MyMarlin.json" + }, + { + "name": "Generic RRF Printer", + "sub_path": "machine/MyRRF.json" + }, + { + "name": "Generic ToolChanger Printer", + "sub_path": "machine/MyToolChanger.json" + } + ], + "process_list": [ + { + "name": "fdm_process_common", + "sub_path": "process/fdm_process_common.json" + }, + { + "name": "fdm_process_klipper_common", + "sub_path": "process/fdm_process_klipper_common.json" + }, + { + "name": "fdm_process_rrf_common", + "sub_path": "process/fdm_process_rrf_common.json" + }, + { + "name": "fdm_process_marlin_common", + "sub_path": "process/fdm_process_marlin_common.json" + }, + { + "name": "fdm_process_mytoolchanger_common", + "sub_path": "process/fdm_process_mytoolchanger_common.json" + }, + { + "name": "0.08mm Extra Fine @MyKlipper", + "sub_path": "process/0.08mm Extra Fine @MyKlipper.json" + }, + { + "name": "0.12mm Fine @MyKlipper", + "sub_path": "process/0.12mm Fine @MyKlipper.json" + }, + { + "name": "0.15mm Optimal @MyKlipper", + "sub_path": "process/0.15mm Optimal @MyKlipper.json" + }, + { + "name": "0.16mm Optimal @MyKlipper", + "sub_path": "process/0.16mm Optimal @MyKlipper.json" + }, + { + "name": "0.20mm Standard @MyKlipper", + "sub_path": "process/0.20mm Standard @MyKlipper.json" + }, + { + "name": "0.24mm Draft @MyKlipper", + "sub_path": "process/0.24mm Draft @MyKlipper.json" + }, + { + "name": "0.28mm Extra Draft @MyKlipper", + "sub_path": "process/0.28mm Extra Draft @MyKlipper.json" + }, + { + "name": "0.32mm Extra Draft @MyKlipper", + "sub_path": "process/0.32mm Extra Draft @MyKlipper.json" + }, + { + "name": "0.40mm Extra Draft @MyKlipper", + "sub_path": "process/0.40mm Extra Draft @MyKlipper.json" + }, + { + "name": "0.56mm Extra Draft @MyKlipper", + "sub_path": "process/0.56mm Extra Draft @MyKlipper.json" + }, + { + "name": "0.08mm Extra Fine @MyRRF", + "sub_path": "process/0.08mm Extra Fine @MyRRF.json" + }, + { + "name": "0.12mm Fine @MyRRF", + "sub_path": "process/0.12mm Fine @MyRRF.json" + }, + { + "name": "0.15mm Optimal @MyRRF", + "sub_path": "process/0.15mm Optimal @MyRRF.json" + }, + { + "name": "0.20mm Standard @MyRRF", + "sub_path": "process/0.20mm Standard @MyRRF.json" + }, + { + "name": "0.24mm Draft @MyRRF", + "sub_path": "process/0.24mm Draft @MyRRF.json" + }, + { + "name": "0.28mm Extra Draft @MyRRF", + "sub_path": "process/0.28mm Extra Draft @MyRRF.json" + }, + { + "name": "0.08mm Extra Fine @MyMarlin", + "sub_path": "process/0.08mm Extra Fine @MyMarlin.json" + }, + { + "name": "0.12mm Fine @MyMarlin", + "sub_path": "process/0.12mm Fine @MyMarlin.json" + }, + { + "name": "0.15mm Optimal @MyMarlin", + "sub_path": "process/0.15mm Optimal @MyMarlin.json" + }, + { + "name": "0.20mm Standard @MyMarlin", + "sub_path": "process/0.20mm Standard @MyMarlin.json" + }, + { + "name": "0.24mm Draft @MyMarlin", + "sub_path": "process/0.24mm Draft @MyMarlin.json" + }, + { + "name": "0.28mm Extra Draft @MyMarlin", + "sub_path": "process/0.28mm Extra Draft @MyMarlin.json" + }, + { + "name": "0.08mm Extra Fine @MyToolChanger", + "sub_path": "process/0.08mm Extra Fine @MyToolChanger.json" + }, + { + "name": "0.12mm Fine @MyToolChanger", + "sub_path": "process/0.12mm Fine @MyToolChanger.json" + }, + { + "name": "0.15mm Optimal @MyToolChanger", + "sub_path": "process/0.15mm Optimal @MyToolChanger.json" + }, + { + "name": "0.16mm Optimal @MyToolChanger", + "sub_path": "process/0.16mm Optimal @MyToolChanger.json" + }, + { + "name": "0.20mm Standard @MyToolChanger", + "sub_path": "process/0.20mm Standard @MyToolChanger.json" + }, + { + "name": "0.24mm Draft @MyToolChanger", + "sub_path": "process/0.24mm Draft @MyToolChanger.json" + }, + { + "name": "0.28mm Extra Draft @MyToolChanger", + "sub_path": "process/0.28mm Extra Draft @MyToolChanger.json" + }, + { + "name": "0.32mm Extra Draft @MyToolChanger", + "sub_path": "process/0.32mm Extra Draft @MyToolChanger.json" + }, + { + "name": "0.40mm Extra Draft @MyToolChanger", + "sub_path": "process/0.40mm Extra Draft @MyToolChanger.json" + }, + { + "name": "0.56mm Extra Draft @MyToolChanger", + "sub_path": "process/0.56mm Extra Draft @MyToolChanger.json" + } + ], + "filament_list": [ + { + "name": "Generic PLA @MyToolChanger", + "sub_path": "filament/Generic PLA @MyToolChanger.json" + }, + { + "name": "Generic PLA-CF @MyToolChanger", + "sub_path": "filament/Generic PLA-CF @MyToolChanger.json" + }, + { + "name": "Generic PETG @MyToolChanger", + "sub_path": "filament/Generic PETG @MyToolChanger.json" + }, + { + "name": "Generic ABS @MyToolChanger", + "sub_path": "filament/Generic ABS @MyToolChanger.json" + }, + { + "name": "Generic TPU @MyToolChanger", + "sub_path": "filament/Generic TPU @MyToolChanger.json" + }, + { + "name": "Generic ASA @MyToolChanger", + "sub_path": "filament/Generic ASA @MyToolChanger.json" + }, + { + "name": "Generic PC @MyToolChanger", + "sub_path": "filament/Generic PC @MyToolChanger.json" + }, + { + "name": "Generic PVA @MyToolChanger", + "sub_path": "filament/Generic PVA @MyToolChanger.json" + }, + { + "name": "Generic PA @MyToolChanger", + "sub_path": "filament/Generic PA @MyToolChanger.json" + }, + { + "name": "Generic PA-CF @MyToolChanger", + "sub_path": "filament/Generic PA-CF @MyToolChanger.json" + } + ], + "machine_list": [ + { + "name": "fdm_machine_common", + "sub_path": "machine/fdm_machine_common.json" + }, + { + "name": "fdm_klipper_common", + "sub_path": "machine/fdm_klipper_common.json" + }, + { + "name": "fdm_rrf_common", + "sub_path": "machine/fdm_rrf_common.json" + }, + { + "name": "fdm_toolchanger_common", + "sub_path": "machine/fdm_toolchanger_common.json" + }, + { + "name": "MyKlipper 0.4 nozzle", + "sub_path": "machine/MyKlipper 0.4 nozzle.json" + }, + { + "name": "MyKlipper 0.2 nozzle", + "sub_path": "machine/MyKlipper 0.2 nozzle.json" + }, + { + "name": "MyKlipper 0.6 nozzle", + "sub_path": "machine/MyKlipper 0.6 nozzle.json" + }, + { + "name": "MyKlipper 0.8 nozzle", + "sub_path": "machine/MyKlipper 0.8 nozzle.json" + }, + { + "name": "MyMarlin 0.4 nozzle", + "sub_path": "machine/MyMarlin 0.4 nozzle.json" + }, + { + "name": "MyRRF 0.4 nozzle", + "sub_path": "machine/MyRRF 0.4 nozzle.json" + }, + { + "name": "MyToolChanger 0.4 nozzle", + "sub_path": "machine/MyToolChanger 0.4 nozzle.json" + }, + { + "name": "MyToolChanger 0.2 nozzle", + "sub_path": "machine/MyToolChanger 0.2 nozzle.json" + }, + { + "name": "MyToolChanger 0.6 nozzle", + "sub_path": "machine/MyToolChanger 0.6 nozzle.json" + }, + { + "name": "MyToolChanger 0.8 nozzle", + "sub_path": "machine/MyToolChanger 0.8 nozzle.json" + } + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/filament/Generic ABS @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/filament/Generic ABS @MyToolChanger.json new file mode 100644 index 0000000..23238a1 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/filament/Generic ABS @MyToolChanger.json @@ -0,0 +1,51 @@ +{ + "type": "filament", + "setting_id": "GFB99_MTC_0", + "name": "Generic ABS @MyToolChanger", + "renamed_from": "My Generic ABS @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "Generic ABS @System", + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_load_time": [ + "10.5" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_unload_time": [ + "8.5" + ], + "filament_unloading_speed": [ + "100" + ], + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.2 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/filament/Generic ASA @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/filament/Generic ASA @MyToolChanger.json new file mode 100644 index 0000000..28f13fc --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/filament/Generic ASA @MyToolChanger.json @@ -0,0 +1,51 @@ +{ + "type": "filament", + "setting_id": "GFB98_MTC_0", + "name": "Generic ASA @MyToolChanger", + "renamed_from": "My Generic ASA @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "Generic ASA @System", + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_load_time": [ + "10.5" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_unload_time": [ + "8.5" + ], + "filament_unloading_speed": [ + "100" + ], + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.2 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/filament/Generic PA @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/filament/Generic PA @MyToolChanger.json new file mode 100644 index 0000000..76ab962 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/filament/Generic PA @MyToolChanger.json @@ -0,0 +1,51 @@ +{ + "type": "filament", + "setting_id": "GFN99_MTC_0", + "name": "Generic PA @MyToolChanger", + "renamed_from": "My Generic PA @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "Generic PA @System", + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_load_time": [ + "10.5" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_unload_time": [ + "8.5" + ], + "filament_unloading_speed": [ + "100" + ], + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.2 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/filament/Generic PA-CF @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/filament/Generic PA-CF @MyToolChanger.json new file mode 100644 index 0000000..a0dfaa0 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/filament/Generic PA-CF @MyToolChanger.json @@ -0,0 +1,51 @@ +{ + "type": "filament", + "setting_id": "GFN98_MTC_0", + "name": "Generic PA-CF @MyToolChanger", + "renamed_from": "My Generic PA-CF @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "Generic PA-CF @System", + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_load_time": [ + "10.5" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_unload_time": [ + "8.5" + ], + "filament_unloading_speed": [ + "100" + ], + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.2 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/filament/Generic PC @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/filament/Generic PC @MyToolChanger.json new file mode 100644 index 0000000..0ff6bee --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/filament/Generic PC @MyToolChanger.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "filament_id": "GFC99", + "setting_id": "GFC99_MTC_0", + "name": "Generic PC @MyToolChanger", + "renamed_from": "My Generic PC @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "Generic PC @System", + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_load_time": [ + "10.5" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_unload_time": [ + "8.5" + ], + "filament_unloading_speed": [ + "100" + ], + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.2 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/filament/Generic PETG @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/filament/Generic PETG @MyToolChanger.json new file mode 100644 index 0000000..27f0c96 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/filament/Generic PETG @MyToolChanger.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "filament_id": "GFG99", + "setting_id": "GFG99_MTC_0", + "name": "Generic PETG @MyToolChanger", + "renamed_from": "My Generic PETG @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "Generic PETG @System", + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_load_time": [ + "10.5" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_unload_time": [ + "8.5" + ], + "filament_unloading_speed": [ + "100" + ], + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.2 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/filament/Generic PLA @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/filament/Generic PLA @MyToolChanger.json new file mode 100644 index 0000000..ef24ac2 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/filament/Generic PLA @MyToolChanger.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFL99_MTC_0", + "name": "Generic PLA @MyToolChanger", + "renamed_from": "My Generic PLA @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "Generic PLA @System", + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_load_time": [ + "10.5" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_unload_time": [ + "8.5" + ], + "filament_unloading_speed": [ + "100" + ], + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.2 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/filament/Generic PLA-CF @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/filament/Generic PLA-CF @MyToolChanger.json new file mode 100644 index 0000000..8be0250 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/filament/Generic PLA-CF @MyToolChanger.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "filament_id": "GFL98", + "setting_id": "GFL98_MTC_0", + "name": "Generic PLA-CF @MyToolChanger", + "renamed_from": "My Generic PLA-CF @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "Generic PLA-CF @System", + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_load_time": [ + "10.5" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_unload_time": [ + "8.5" + ], + "filament_unloading_speed": [ + "100" + ], + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.2 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/filament/Generic PVA @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/filament/Generic PVA @MyToolChanger.json new file mode 100644 index 0000000..acb5e84 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/filament/Generic PVA @MyToolChanger.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "filament_id": "GFS99", + "setting_id": "GFS99_MTC_0", + "name": "Generic PVA @MyToolChanger", + "renamed_from": "My Generic PVA @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "Generic PVA @System", + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_load_time": [ + "10.5" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_unload_time": [ + "8.5" + ], + "filament_unloading_speed": [ + "100" + ], + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.2 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/filament/Generic TPU @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/filament/Generic TPU @MyToolChanger.json new file mode 100644 index 0000000..1f207dc --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/filament/Generic TPU @MyToolChanger.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "filament_id": "GFU99", + "setting_id": "GFU99_MTC_0", + "name": "Generic TPU @MyToolChanger", + "renamed_from": "My Generic TPU @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "Generic TPU @System", + "filament_max_volumetric_speed": [ + "3.2" + ], + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.2 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/machine/MyKlipper 0.2 nozzle.json b/.config/OrcaSlicer/system/Custom/machine/MyKlipper 0.2 nozzle.json new file mode 100644 index 0000000..1ec29c6 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/MyKlipper 0.2 nozzle.json @@ -0,0 +1,26 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "MyKlipper 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "Generic Klipper Printer", + "nozzle_diameter": [ + "0.2" + ], + "max_layer_height": [ + "0.16" + ], + "min_layer_height": [ + "0.04" + ], + "printer_variant": "0.2", + "printable_area": [ + "0x0", + "250x0", + "250x250", + "0x250" + ], + "printable_height": "250" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/machine/MyKlipper 0.4 nozzle.json b/.config/OrcaSlicer/system/Custom/machine/MyKlipper 0.4 nozzle.json new file mode 100644 index 0000000..c2de0ec --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/MyKlipper 0.4 nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "MyKlipper 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "Generic Klipper Printer", + "nozzle_diameter": [ + "0.4" + ], + "printer_variant": "0.4", + "printable_area": [ + "0x0", + "250x0", + "250x250", + "0x250" + ], + "printable_height": "250" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/machine/MyKlipper 0.6 nozzle.json b/.config/OrcaSlicer/system/Custom/machine/MyKlipper 0.6 nozzle.json new file mode 100644 index 0000000..9240467 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/MyKlipper 0.6 nozzle.json @@ -0,0 +1,26 @@ +{ + "type": "machine", + "setting_id": "GM003", + "name": "MyKlipper 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "Generic Klipper Printer", + "nozzle_diameter": [ + "0.6" + ], + "max_layer_height": [ + "0.4" + ], + "min_layer_height": [ + "0.12" + ], + "printer_variant": "0.6", + "printable_area": [ + "0x0", + "250x0", + "250x250", + "0x250" + ], + "printable_height": "250" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/machine/MyKlipper 0.8 nozzle.json b/.config/OrcaSlicer/system/Custom/machine/MyKlipper 0.8 nozzle.json new file mode 100644 index 0000000..be658b0 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/MyKlipper 0.8 nozzle.json @@ -0,0 +1,26 @@ +{ + "type": "machine", + "setting_id": "GM004", + "name": "MyKlipper 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "Generic Klipper Printer", + "nozzle_diameter": [ + "0.8" + ], + "max_layer_height": [ + "0.6" + ], + "min_layer_height": [ + "0.2" + ], + "printer_variant": "0.8", + "printable_area": [ + "0x0", + "250x0", + "250x250", + "0x250" + ], + "printable_height": "250" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/machine/MyKlipper.json b/.config/OrcaSlicer/system/Custom/machine/MyKlipper.json new file mode 100644 index 0000000..9f909d3 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/MyKlipper.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Generic Klipper Printer", + "model_id": "my_klipper_01", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "machine_tech": "FFF", + "family": "MyPrinter", + "bed_model": "", + "bed_texture": "orcaslicer_bed_texture.svg", + "hotend_model": "", + "default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System" +} diff --git a/.config/OrcaSlicer/system/Custom/machine/MyMarlin 0.4 nozzle.json b/.config/OrcaSlicer/system/Custom/machine/MyMarlin 0.4 nozzle.json new file mode 100644 index 0000000..2558183 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/MyMarlin 0.4 nozzle.json @@ -0,0 +1,44 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "MyMarlin 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_machine_common", + "printer_model": "Generic Marlin Printer", + "gcode_flavor": "marlin", + "machine_end_gcode": "G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors", + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0", + "max_layer_height": [ + "0.32" + ], + "retraction_length": [ + "0.9" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "45" + ], + "deretraction_speed": [ + "35" + ], + "version": "1.5.1.2", + "wipe": [ + "0" + ], + "z_hop": [ + "0.4" + ], + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "250x0", + "250x250", + "0x250" + ], + "printable_height": "250" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/machine/MyMarlin.json b/.config/OrcaSlicer/system/Custom/machine/MyMarlin.json new file mode 100644 index 0000000..afd744e --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/MyMarlin.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Generic Marlin Printer", + "model_id": "my_marlin_01", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "MyPrinter", + "bed_model": "", + "bed_texture": "orcaslicer_bed_texture.svg", + "hotend_model": "", + "default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System" +} diff --git a/.config/OrcaSlicer/system/Custom/machine/MyRRF 0.4 nozzle.json b/.config/OrcaSlicer/system/Custom/machine/MyRRF 0.4 nozzle.json new file mode 100644 index 0000000..3a204d7 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/MyRRF 0.4 nozzle.json @@ -0,0 +1,19 @@ +{ + "type": "machine", + "setting_id": "GM003", + "name": "MyRRF 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_rrf_common", + "printer_model": "Generic RRF Printer", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "250x0", + "250x250", + "0x250" + ], + "printable_height": "250" +} diff --git a/.config/OrcaSlicer/system/Custom/machine/MyRRF.json b/.config/OrcaSlicer/system/Custom/machine/MyRRF.json new file mode 100644 index 0000000..c830e20 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/MyRRF.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Generic RRF Printer", + "model_id": "my_rrf_01", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "MyPrinter", + "bed_model": "", + "bed_texture": "orcaslicer_bed_texture.svg", + "hotend_model": "", + "default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.2 nozzle.json b/.config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.2 nozzle.json new file mode 100644 index 0000000..f23384a --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.2 nozzle.json @@ -0,0 +1,30 @@ +{ + "type": "machine", + "setting_id": "GM_CUSTOM_001", + "name": "MyToolChanger 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_toolchanger_common", + "printer_model": "Generic ToolChanger Printer", + "nozzle_diameter": [ + "0.2", + "0.2", + "0.2", + "0.2", + "0.2" + ], + "max_layer_height": [ + "0.16" + ], + "min_layer_height": [ + "0.04" + ], + "printer_variant": "0.2", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "300" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.4 nozzle.json b/.config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.4 nozzle.json new file mode 100644 index 0000000..cf43dd0 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.4 nozzle.json @@ -0,0 +1,24 @@ +{ + "type": "machine", + "setting_id": "GM_CUSTOM_002", + "name": "MyToolChanger 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_toolchanger_common", + "printer_model": "Generic ToolChanger Printer", + "nozzle_diameter": [ + "0.4", + "0.4", + "0.4", + "0.4", + "0.4" + ], + "printer_variant": "0.4", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "300" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.6 nozzle.json b/.config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.6 nozzle.json new file mode 100644 index 0000000..b8d3875 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.6 nozzle.json @@ -0,0 +1,30 @@ +{ + "type": "machine", + "setting_id": "GM_CUSTOM_003", + "name": "MyToolChanger 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_toolchanger_common", + "printer_model": "Generic ToolChanger Printer", + "nozzle_diameter": [ + "0.6", + "0.6", + "0.6", + "0.6", + "0.6" + ], + "max_layer_height": [ + "0.4" + ], + "min_layer_height": [ + "0.12" + ], + "printer_variant": "0.6", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "300" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.8 nozzle.json b/.config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.8 nozzle.json new file mode 100644 index 0000000..2ce7029 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/MyToolChanger 0.8 nozzle.json @@ -0,0 +1,30 @@ +{ + "type": "machine", + "setting_id": "GM_CUSTOM_004", + "name": "MyToolChanger 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_toolchanger_common", + "printer_model": "Generic ToolChanger Printer", + "nozzle_diameter": [ + "0.8", + "0.8", + "0.8", + "0.8", + "0.8" + ], + "max_layer_height": [ + "0.6" + ], + "min_layer_height": [ + "0.2" + ], + "printer_variant": "0.8", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "300" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/machine/MyToolChanger.json b/.config/OrcaSlicer/system/Custom/machine/MyToolChanger.json new file mode 100644 index 0000000..97b29c9 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/MyToolChanger.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Generic ToolChanger Printer", + "model_id": "my_toolchanger_01", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "machine_tech": "FFF", + "family": "MyPrinter", + "bed_model": "Custom_350_bed.stl", + "bed_texture": "orcaslicer_bed_texture.svg", + "hotend_model": "", + "default_materials": "Generic PLA @MyToolChanger;Generic ABS @MyToolChanger;Generic PLA-CF @MyToolChanger;Generic PETG @MyToolChanger;Generic TPU @MyToolChanger;Generic ASA @MyToolChanger;Generic PC @MyToolChanger;Generic PVA @MyToolChanger;Generic PA @MyToolChanger;Generic PA-CF @MyToolChanger" +} diff --git a/.config/OrcaSlicer/system/Custom/machine/fdm_klipper_common.json b/.config/OrcaSlicer/system/Custom/machine/fdm_klipper_common.json new file mode 100644 index 0000000..9ba6b51 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/fdm_klipper_common.json @@ -0,0 +1,60 @@ +{ + "type": "machine", + "name": "fdm_klipper_common", + "from": "system", + "instantiation": "false", + "inherits": "fdm_machine_common", + "gcode_flavor": "klipper", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["500", "200"], + "machine_max_speed_e": ["25", "25"], + "machine_max_speed_x": ["500", "200"], + "machine_max_speed_y": ["500", "200"], + "machine_max_speed_z": ["12", "12"], + "machine_max_jerk_e": ["2.5", "2.5"], + "machine_max_jerk_x": ["9", "9"], + "machine_max_jerk_y": ["9", "9"], + "machine_max_jerk_z": ["0.2", "0.4"], + "machine_min_extruding_rate": ["0", "0"], + "machine_min_travel_rate": ["0", "0"], + "max_layer_height": ["0.32"], + "min_layer_height": ["0.08"], + "printable_height": "250", + "extruder_clearance_radius": "65", + "extruder_clearance_height_to_rod": "36", + "extruder_clearance_height_to_lid": "140", + "printer_settings_id": "", + "printer_technology": "FFF", + "printer_variant": "0.4", + "retraction_minimum_travel": ["1"], + "retract_before_wipe": ["70%"], + "retract_when_changing_layer": ["1"], + "retraction_length": ["0.8"], + "retract_length_toolchange": ["2"], + "z_hop": ["0.4"], + "retract_restart_extra": ["0"], + "retract_restart_extra_toolchange": ["0"], + "retraction_speed": ["30"], + "deretraction_speed": ["30"], + "z_hop_types": "Normal Lift", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "change_filament_gcode": "", + "wipe": ["1"], + "default_filament_profile": ["Generic PLA @System"], + "default_print_profile": "0.20mm Standard @MyKlipper", + "bed_exclude_area": ["0x0"], + "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n", + "machine_end_gcode": "PRINT_END", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "machine_pause_gcode": "PAUSE", + "scan_first_layer": "0", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/.config/OrcaSlicer/system/Custom/machine/fdm_machine_common.json b/.config/OrcaSlicer/system/Custom/machine/fdm_machine_common.json new file mode 100644 index 0000000..27d7157 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/fdm_machine_common.json @@ -0,0 +1,119 @@ +{ + "type": "machine", + "name": "fdm_machine_common", + "from": "system", + "instantiation": "false", + "printer_technology": "FFF", + "deretraction_speed": [ + "40" + ], + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "gcode_flavor": "marlin", + "silent_mode": "0", + "machine_max_acceleration_e": [ + "5000" + ], + "machine_max_acceleration_extruding": [ + "10000" + ], + "machine_max_acceleration_retracting": [ + "1000" + ], + "machine_max_acceleration_x": [ + "10000" + ], + "machine_max_acceleration_y": [ + "10000" + ], + "machine_max_acceleration_z": [ + "500" + ], + "machine_max_speed_e": [ + "60" + ], + "machine_max_speed_x": [ + "500" + ], + "machine_max_speed_y": [ + "500" + ], + "machine_max_speed_z": [ + "10" + ], + "machine_max_jerk_e": [ + "5" + ], + "machine_max_jerk_x": [ + "8" + ], + "machine_max_jerk_y": [ + "8" + ], + "machine_max_jerk_z": [ + "0.4" + ], + "machine_min_extruding_rate": [ + "0" + ], + "machine_min_travel_rate": [ + "0" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "printable_height": "250", + "extruder_clearance_radius": "65", + "extruder_clearance_height_to_rod": "36", + "extruder_clearance_height_to_lid": "140", + "nozzle_diameter": [ + "0.4" + ], + "printer_settings_id": "", + "printer_variant": "0.4", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_length": [ + "1" + ], + "retract_length_toolchange": [ + "1" + ], + "z_hop": [ + "0" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retraction_speed": [ + "60" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "", + "wipe": [ + "1" + ], + "default_print_profile": "", + "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", + "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "machine_pause_gcode": "M601" +} diff --git a/.config/OrcaSlicer/system/Custom/machine/fdm_rrf_common.json b/.config/OrcaSlicer/system/Custom/machine/fdm_rrf_common.json new file mode 100644 index 0000000..1c33af0 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/fdm_rrf_common.json @@ -0,0 +1,141 @@ +{ + "type": "machine", + "name": "fdm_rrf_common", + "from": "system", + "instantiation": "false", + "inherits": "fdm_machine_common", + "gcode_flavor": "reprapfirmware", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "200" + ], + "machine_max_speed_e": [ + "25", + "25" + ], + "machine_max_speed_x": [ + "500", + "200" + ], + "machine_max_speed_y": [ + "500", + "200" + ], + "machine_max_speed_z": [ + "12", + "12" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9" + ], + "machine_max_jerk_z": [ + "0.2", + "0.4" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "printable_height": "250", + "extruder_clearance_radius": "65", + "extruder_clearance_height_to_rod": "36", + "extruder_clearance_height_to_lid": "140", + "printer_settings_id": "", + "printer_technology": "FFF", + "printer_variant": "0.4", + "retraction_minimum_travel": [ + "1" + ], + "retract_before_wipe": [ + "70%" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_length": [ + "0.8" + ], + "retract_length_toolchange": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retraction_speed": [ + "30" + ], + "deretraction_speed": [ + "30" + ], + "z_hop_types": "Normal Lift", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "change_filament_gcode": "", + "wipe": [ + "1" + ], + "default_filament_profile": [ + "Generic PLA @System" + ], + "default_print_profile": "0.20mm Standard @MyRRF", + "bed_exclude_area": [ + "0x0" + ], + "scan_first_layer": "0", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_start_gcode": "; Prime Filament Sensor for Runout\nM581 P1 T2 S-1 R0\nM950 J1 C\"nil\" ; Input 1 e0 Filament Sensor \nM591 D0 P2 C\"e0stop\" S1 ; Filament Runout Sensor\n\nM83 ; extruder relative mode\n\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S140 ; Set extruder temp 140C before bed level\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\n;G28 W\nG32 ; Levels Z Tilt and probes Z=0\nG29 S0 ; mesh bed leveling\nG1 X0 Y0 Z2 F2000\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG1 X10 Y-7 Z0.3 F1000.0 ; go outside print area\nG92 E0.0\nG1 Z0.2 E8 ; Purge Bubble\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0", + "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "machine_pause_gcode": "M601" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/machine/fdm_toolchanger_common.json b/.config/OrcaSlicer/system/Custom/machine/fdm_toolchanger_common.json new file mode 100644 index 0000000..0f6ca7d --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/machine/fdm_toolchanger_common.json @@ -0,0 +1,189 @@ +{ + "type": "machine", + "name": "fdm_toolchanger_common", + "from": "system", + "instantiation": "false", + "inherits": "fdm_klipper_common", + "gcode_flavor": "klipper", + "single_extruder_multi_material": "0", + "default_filament_profile": [ + "Generic PLA @MyToolChanger" + ], + "default_print_profile": "0.20mm Standard @MyToolChanger", + "max_layer_height": [ + "0.32", + "0.32", + "0.32", + "0.32", + "0.32" + ], + "min_layer_height": [ + "0.08", + "0.08", + "0.08", + "0.08", + "0.08" + ], + "deretraction_speed": [ + "30", + "30", + "30", + "30", + "30" + ], + "extruder_colour": [ + "#FCE94F", + "#FCE94F", + "#FCE94F", + "#FCE94F", + "#FCE94F" + ], + "extruder_offset": [ + "0x0", + "0x0", + "0x0", + "0x0", + "0x0" + ], + "long_retractions_when_cut": [ + "0", + "0", + "0", + "0", + "0" + ], + "nozzle_diameter": [ + "0.4", + "0.4", + "0.4", + "0.4", + "0.4" + ], + "retract_before_wipe": [ + "70%", + "70%", + "70%", + "70%", + "70%" + ], + "retract_length_toolchange": [ + "2", + "2", + "2", + "2", + "2" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0", + "0" + ], + "retract_lift_below": [ + "0", + "0", + "0", + "0", + "0" + ], + "retract_lift_enforce": [ + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18" + ], + "retraction_length": [ + "0.8", + "0.8", + "0.8", + "0.8", + "0.8" + ], + "retraction_minimum_travel": [ + "1", + "1", + "1", + "1", + "1" + ], + "retraction_speed": [ + "30", + "30", + "30", + "30", + "30" + ], + "travel_slope": [ + "3", + "3", + "3", + "3", + "3" + ], + "version": "2.1.1.1", + "wipe": [ + "1", + "1", + "1", + "1", + "1" + ], + "wipe_distance": [ + "1", + "1", + "1", + "1", + "1" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4", + "0.4" + ], + "z_hop_types": [ + "Normal Lift", + "Normal Lift", + "Normal Lift", + "Normal Lift", + "Normal Lift" + ], + "purge_in_prime_tower": "0", + "machine_pause_gcode": "M601", + "change_filament_gcode": "", "machine_start_gcode": "PRINT_START TOOL_TEMP={first_layer_temperature[initial_tool]} {if is_extruder_used[0]}T0_TEMP={first_layer_temperature[0]}{endif} {if is_extruder_used[1]}T1_TEMP={first_layer_temperature[1]}{endif} {if is_extruder_used[2]}T2_TEMP={first_layer_temperature[2]}{endif} {if is_extruder_used[3]}T3_TEMP={first_layer_temperature[3]}{endif} {if is_extruder_used[4]}T4_TEMP={first_layer_temperature[4]}{endif} {if is_extruder_used[5]}T5_TEMP={first_layer_temperature[5]}{endif} BED_TEMP=[first_layer_bed_temperature] TOOL=[initial_tool]\n\nM83\n; set extruder temp\n{if first_layer_temperature[0] > 0 and (is_extruder_used[0])}M104 T0 S{first_layer_temperature[0]}{endif}\n{if first_layer_temperature[1] > 0 and (is_extruder_used[1])}M104 T1 S{first_layer_temperature[1]}{endif}\n{if first_layer_temperature[2] > 0 and (is_extruder_used[2])}M104 T2 S{first_layer_temperature[2]}{endif}\n{if first_layer_temperature[3] > 0 and (is_extruder_used[3])}M104 T3 S{first_layer_temperature[3]}{endif}\n{if first_layer_temperature[4] > 0 and (is_extruder_used[4])}M104 T4 S{first_layer_temperature[4]}{endif}\n{if (is_extruder_used[0]) and initial_tool != 0}\n;\n; purge first tool\n;\nG1 F{travel_speed * 60}\nM109 T0 S{first_layer_temperature[0]}\nT0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(0 == 0 ? 0 : (0 == 1 ? 120 : (0 == 2 ? 180 : 300)))} Y{(0 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[0]}10{else}30{endif} X40 Z0.2 F{if filament_multitool_ramming[0]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X40 E9 F800 ; continue purging and wipe the nozzle\nG0 X{40 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{40 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[0]} F2400 ; retract\n{e_retracted[0] = 1.5 * retract_length[0]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[0] == 0 ? (first_layer_temperature[0] + standby_temperature_delta) : (idle_temperature[0]))} T0\n{endif}\n{if (is_extruder_used[1]) and initial_tool != 1}\n;\n; purge second tool\n;\nG1 F{travel_speed * 60}\nM109 T1 S{first_layer_temperature[1]}\nT1; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(1 == 0 ? 0 : (1 == 1 ? 120 : (1 == 2 ? 180 : 300)))} Y{(1 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[1]}10{else}30{endif} X120 Z0.2 F{if filament_multitool_ramming[1]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X80 E9 F800 ; continue purging and wipe the nozzle\nG0 X{80 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{80 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[1]} F2400 ; retract\n{e_retracted[1] = 1.5 * retract_length[1]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[1] == 0 ? (first_layer_temperature[1] + standby_temperature_delta) : (idle_temperature[1]))} T1\n{endif}\n{if (is_extruder_used[2]) and initial_tool != 2}\n;\n; purge third tool\n;\nG1 F{travel_speed * 60}\nM109 T2 S{first_layer_temperature[2]}\nT2; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(2 == 0 ? 0 : (2 == 1 ? 120 : (2 == 2 ? 180 : 300)))} Y{(2 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[2]}10{else}30{endif} X220 Z0.2 F{if filament_multitool_ramming[2]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X220 E9 F800 ; continue purging and wipe the nozzle\nG0 X{220 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{220 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[2]} F2400 ; retract\n{e_retracted[2] = 1.5 * retract_length[2]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[2] == 0 ? (first_layer_temperature[2] + standby_temperature_delta) : (idle_temperature[2]))} T2\n{endif}\n{if (is_extruder_used[3]) and initial_tool != 3}\n;\n; purge fourth tool\n;\nG1 F{travel_speed * 60}\nM109 T3 S{first_layer_temperature[3]}\nT3; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(3 == 0 ? 0 : (3 == 1 ? 120 : (3 == 2 ? 180 : 300)))} Y{(3 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[3]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[3]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[3]} F2400 ; retract\n{e_retracted[3] = 1.5 * retract_length[3]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[3] == 0 ? (first_layer_temperature[3] + standby_temperature_delta) : (idle_temperature[3]))} T3\n{endif}\n{if (is_extruder_used[4]) and initial_tool != 4}\n;\n; purge fifth tool\n;\nG1 F{travel_speed * 60}\nM109 T4 S{first_layer_temperature[4]}\nT4; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(4 == 0 ? 0 : (4 == 1 ? 120 : (4 == 2 ? 180 : 300)))} Y{(4 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[4]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[4]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[4]} F2400 ; retract\n{e_retracted[4] = 1.5 * retract_length[4]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[4] == 0 ? (first_layer_temperature[4] + standby_temperature_delta) : (idle_temperature[4]))} T4\n{endif}\n;\n; purge initial tool\n;\nG1 F{travel_speed * 60}\nM109 T{initial_tool} S{first_layer_temperature[initial_tool]}\nT{initial_tool}; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300)))} Y{(initial_tool < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[initial_tool]}10{else}30{endif} X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 10)} Z0.2 F{if filament_multitool_ramming[initial_tool]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40)} E9 F800 ; continue purging and wipe the nozzle\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3)} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3 * 2)} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[initial_tool]} F2400 ; retract\n{e_retracted[initial_tool] = 1.5 * retract_length[initial_tool]}\nG92 E0 ; reset extruder position\n", + + "scan_first_layer": "0", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyKlipper.json b/.config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyKlipper.json new file mode 100644 index 0000000..b9f1557 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyKlipper.json @@ -0,0 +1,19 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm Extra Fine @MyKlipper", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_klipper_common", + "layer_height": "0.08", + "bottom_shell_layers": "7", + "top_shell_layers": "9", + "support_top_z_distance": "0.08", + "support_bottom_z_distance": "0.08", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyKlipper 0.4 nozzle", + "MyKlipper 0.2 nozzle", + "MyKlipper 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyMarlin.json b/.config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyMarlin.json new file mode 100644 index 0000000..d8d4ad7 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyMarlin.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm Extra Fine @MyMarlin", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_marlin_common", + "layer_height": "0.08", + "bottom_shell_layers": "7", + "top_shell_layers": "9" +} diff --git a/.config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyRRF.json b/.config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyRRF.json new file mode 100644 index 0000000..8bc0105 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyRRF.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm Extra Fine @MyRRF", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_rrf_common", + "layer_height": "0.08", + "bottom_shell_layers": "7", + "top_shell_layers": "9" +} diff --git a/.config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyToolChanger.json new file mode 100644 index 0000000..4ce1736 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.08mm Extra Fine @MyToolChanger.json @@ -0,0 +1,19 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm Extra Fine @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_mytoolchanger_common", + "layer_height": "0.08", + "bottom_shell_layers": "7", + "top_shell_layers": "9", + "support_top_z_distance": "0.08", + "support_bottom_z_distance": "0.08", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.2 nozzle", + "MyToolChanger 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyKlipper.json b/.config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyKlipper.json new file mode 100644 index 0000000..575bd40 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyKlipper.json @@ -0,0 +1,19 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @MyKlipper", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_klipper_common", + "layer_height": "0.12", + "bottom_shell_layers": "5", + "top_shell_layers": "6", + "support_top_z_distance": "0.08", + "support_bottom_z_distance": "0.08", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyKlipper 0.4 nozzle", + "MyKlipper 0.2 nozzle", + "MyKlipper 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyMarlin.json b/.config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyMarlin.json new file mode 100644 index 0000000..3c9beff --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyMarlin.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @MyMarlin", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_marlin_common", + "layer_height": "0.12", + "bottom_shell_layers": "5", + "top_shell_layers": "6" +} diff --git a/.config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyRRF.json b/.config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyRRF.json new file mode 100644 index 0000000..cf0da14 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyRRF.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @MyRRF", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_rrf_common", + "layer_height": "0.12", + "bottom_shell_layers": "5", + "top_shell_layers": "6" +} diff --git a/.config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyToolChanger.json new file mode 100644 index 0000000..1117ba5 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.12mm Fine @MyToolChanger.json @@ -0,0 +1,19 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_mytoolchanger_common", + "layer_height": "0.12", + "bottom_shell_layers": "5", + "top_shell_layers": "6", + "support_top_z_distance": "0.08", + "support_bottom_z_distance": "0.08", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.2 nozzle", + "MyToolChanger 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyKlipper.json b/.config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyKlipper.json new file mode 100644 index 0000000..518ed7c --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyKlipper.json @@ -0,0 +1,20 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Optimal @MyKlipper", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_klipper_common", + "bottom_shell_layers": "4", + "top_shell_layers": "5", + "layer_height": "0.15", + "support_top_z_distance": "0.15", + "support_bottom_z_distance": "0.15", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyKlipper 0.4 nozzle", + "MyKlipper 0.2 nozzle", + "MyKlipper 0.6 nozzle", + "MyKlipper 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyMarlin.json b/.config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyMarlin.json new file mode 100644 index 0000000..28a0067 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyMarlin.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Optimal @MyMarlin", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_marlin_common", + "bottom_shell_layers": "4", + "top_shell_layers": "5", + "layer_height": "0.15" +} diff --git a/.config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyRRF.json b/.config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyRRF.json new file mode 100644 index 0000000..dbc5c6e --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyRRF.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Optimal @MyRRF", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_rrf_common", + "bottom_shell_layers": "4", + "top_shell_layers": "5", + "layer_height": "0.15" +} diff --git a/.config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyToolChanger.json new file mode 100644 index 0000000..1325416 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.15mm Optimal @MyToolChanger.json @@ -0,0 +1,20 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Optimal @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_mytoolchanger_common", + "bottom_shell_layers": "4", + "top_shell_layers": "5", + "layer_height": "0.15", + "support_top_z_distance": "0.15", + "support_bottom_z_distance": "0.15", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.2 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.16mm Optimal @MyKlipper.json b/.config/OrcaSlicer/system/Custom/process/0.16mm Optimal @MyKlipper.json new file mode 100644 index 0000000..45df9da --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.16mm Optimal @MyKlipper.json @@ -0,0 +1,20 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @MyKlipper", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_klipper_common", + "bottom_shell_layers": "4", + "top_shell_layers": "5", + "support_top_z_distance": "0.16", + "support_bottom_z_distance": "0.16", + "layer_height": "0.16", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyKlipper 0.4 nozzle", + "MyKlipper 0.2 nozzle", + "MyKlipper 0.6 nozzle", + "MyKlipper 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.16mm Optimal @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/process/0.16mm Optimal @MyToolChanger.json new file mode 100644 index 0000000..f3fa805 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.16mm Optimal @MyToolChanger.json @@ -0,0 +1,20 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_mytoolchanger_common", + "bottom_shell_layers": "4", + "top_shell_layers": "5", + "support_top_z_distance": "0.16", + "support_bottom_z_distance": "0.16", + "layer_height": "0.16", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.2 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyKlipper.json b/.config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyKlipper.json new file mode 100644 index 0000000..d38acd8 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyKlipper.json @@ -0,0 +1,14 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @MyKlipper", + "from": "system", + "inherits": "fdm_process_klipper_common", + "instantiation": "true", + "layer_height": "0.2", + "compatible_printers": [ + "MyKlipper 0.4 nozzle", + "MyKlipper 0.6 nozzle", + "MyKlipper 0.8 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyMarlin.json b/.config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyMarlin.json new file mode 100644 index 0000000..8ce4919 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyMarlin.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @MyMarlin", + "from": "system", + "inherits": "fdm_process_marlin_common", + "instantiation": "true", + "layer_height": "0.2", + "bottom_shell_layers": "3", + "top_shell_layers": "4" +} diff --git a/.config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyRRF.json b/.config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyRRF.json new file mode 100644 index 0000000..84d732c --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyRRF.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @MyRRF", + "from": "system", + "inherits": "fdm_process_rrf_common", + "instantiation": "true", + "layer_height": "0.2", + "bottom_shell_layers": "3", + "top_shell_layers": "4" +} diff --git a/.config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyToolChanger.json new file mode 100644 index 0000000..812886e --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.20mm Standard @MyToolChanger.json @@ -0,0 +1,14 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @MyToolChanger", + "from": "system", + "inherits": "fdm_process_mytoolchanger_common", + "instantiation": "true", + "layer_height": "0.2", + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyKlipper.json b/.config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyKlipper.json new file mode 100644 index 0000000..30a520b --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyKlipper.json @@ -0,0 +1,17 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @MyKlipper", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_klipper_common", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "layer_height": "0.24", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyKlipper 0.4 nozzle", + "MyKlipper 0.6 nozzle", + "MyKlipper 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyMarlin.json b/.config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyMarlin.json new file mode 100644 index 0000000..6ca175d --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyMarlin.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @MyMarlin", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_marlin_common", + "layer_height": "0.24", + "top_surface_line_width": "0.45", + "bottom_shell_layers": "3", + "top_shell_layers": "4" +} diff --git a/.config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyRRF.json b/.config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyRRF.json new file mode 100644 index 0000000..85ca2a9 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyRRF.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @MyRRF", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_rrf_common", + "layer_height": "0.24", + "top_surface_line_width": "0.45", + "bottom_shell_layers": "3", + "top_shell_layers": "4" +} diff --git a/.config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyToolChanger.json new file mode 100644 index 0000000..af372cc --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.24mm Draft @MyToolChanger.json @@ -0,0 +1,17 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_mytoolchanger_common", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "layer_height": "0.24", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyKlipper.json b/.config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyKlipper.json new file mode 100644 index 0000000..a2ff46c --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyKlipper.json @@ -0,0 +1,15 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Extra Draft @MyKlipper", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_klipper_common", + "layer_height": "0.28", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyKlipper 0.4 nozzle", + "MyKlipper 0.6 nozzle", + "MyKlipper 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyMarlin.json b/.config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyMarlin.json new file mode 100644 index 0000000..558b1c5 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyMarlin.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Extra Draft @MyMarlin", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_marlin_common", + "layer_height": "0.28", + "top_surface_line_width": "0.45", + "bottom_shell_layers": "3", + "top_shell_layers": "4" +} diff --git a/.config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyRRF.json b/.config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyRRF.json new file mode 100644 index 0000000..a0dcd98 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyRRF.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Extra Draft @MyRRF", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_rrf_common", + "layer_height": "0.28", + "top_surface_line_width": "0.45", + "bottom_shell_layers": "3", + "top_shell_layers": "4" +} diff --git a/.config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyToolChanger.json new file mode 100644 index 0000000..71f4354 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.28mm Extra Draft @MyToolChanger.json @@ -0,0 +1,15 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Extra Draft @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_mytoolchanger_common", + "layer_height": "0.28", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyKlipper.json b/.config/OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyKlipper.json new file mode 100644 index 0000000..a3da4a7 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyKlipper.json @@ -0,0 +1,17 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.32mm Standard @MyKlipper", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_klipper_common", + "support_top_z_distance": "0.24", + "support_bottom_z_distance": "0.24", + "layer_height": "0.32", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyKlipper 0.4 nozzle", + "MyKlipper 0.6 nozzle", + "MyKlipper 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyToolChanger.json new file mode 100644 index 0000000..d5282ee --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.32mm Extra Draft @MyToolChanger.json @@ -0,0 +1,17 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.32mm Standard @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_mytoolchanger_common", + "support_top_z_distance": "0.24", + "support_bottom_z_distance": "0.24", + "layer_height": "0.32", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyToolChanger 0.4 nozzle", + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyKlipper.json b/.config/OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyKlipper.json new file mode 100644 index 0000000..e5f2093 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyKlipper.json @@ -0,0 +1,16 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.40mm Standard @MyKlipper", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_klipper_common", + "support_top_z_distance": "0.24", + "support_bottom_z_distance": "0.24", + "layer_height": "0.40", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyKlipper 0.6 nozzle", + "MyKlipper 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyToolChanger.json new file mode 100644 index 0000000..940d51d --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.40mm Extra Draft @MyToolChanger.json @@ -0,0 +1,16 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.40mm Standard @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_mytoolchanger_common", + "support_top_z_distance": "0.24", + "support_bottom_z_distance": "0.24", + "layer_height": "0.40", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyToolChanger 0.6 nozzle", + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyKlipper.json b/.config/OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyKlipper.json new file mode 100644 index 0000000..d8e6e21 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyKlipper.json @@ -0,0 +1,15 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.56mm Standard @MyKlipper", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_klipper_common", + "support_top_z_distance": "0.24", + "support_bottom_z_distance": "0.24", + "layer_height": "0.56", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyKlipper 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyToolChanger.json b/.config/OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyToolChanger.json new file mode 100644 index 0000000..ea4ba5c --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/0.56mm Extra Draft @MyToolChanger.json @@ -0,0 +1,15 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.56mm Standard @MyToolChanger", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_mytoolchanger_common", + "support_top_z_distance": "0.24", + "support_bottom_z_distance": "0.24", + "layer_height": "0.56", + "initial_layer_print_height": "0.2", + "compatible_printers": [ + "MyToolChanger 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/fdm_process_common.json b/.config/OrcaSlicer/system/Custom/process/fdm_process_common.json new file mode 100644 index 0000000..cfb78ab --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/fdm_process_common.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "name": "fdm_process_common", + "from": "system", + "instantiation": "false", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_thickness": "0", + "bridge_speed": "50", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "1000", + "initial_layer_acceleration": "500", + "top_surface_acceleration": "1000", + "travel_acceleration": "1000", + "inner_wall_acceleration": "1000", + "outer_wall_acceleration": "700", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "wall_infill_order": "inner wall/outer wall/infill", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "slowdown_for_curled_perimeters": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "line_width": "110%", + "inner_wall_line_width": "110%", + "outer_wall_line_width": "100%", + "top_surface_line_width": "93.75%", + "sparse_infill_line_width": "110%", + "initial_layer_line_width": "120%", + "internal_solid_infill_line_width": "120%", + "support_line_width": "96%", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "3", + "min_skirt_length": "4", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "30", + "tree_support_wall_count": "0", + "tree_support_with_infill": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_shell_thickness": "0.8", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "layer_height": "0.2", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "bridge_flow": "1", + "initial_layer_speed": "45", + "initial_layer_infill_speed": "45", + "outer_wall_speed": "45", + "inner_wall_speed": "80", + "sparse_infill_speed": "150", + "internal_solid_infill_speed": "150", + "top_surface_speed": "50", + "gap_infill_speed": "30", + "travel_speed": "200" +} diff --git a/.config/OrcaSlicer/system/Custom/process/fdm_process_klipper_common.json b/.config/OrcaSlicer/system/Custom/process/fdm_process_klipper_common.json new file mode 100644 index 0000000..cf4a288 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/fdm_process_klipper_common.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "fdm_process_klipper_common", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_common", + "default_acceleration": "5000", + "top_surface_acceleration": "3000", + "travel_acceleration": "7000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "3000", + "initial_layer_acceleration": "500", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "120", + "inner_wall_speed": "200", + "internal_solid_infill_speed": "200", + "top_surface_speed": "100", + "gap_infill_speed": "100", + "sparse_infill_speed": "200", + "travel_speed": "350", + "exclude_object": "1" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/fdm_process_marlin_common.json b/.config/OrcaSlicer/system/Custom/process/fdm_process_marlin_common.json new file mode 100644 index 0000000..7b5bca9 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/fdm_process_marlin_common.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "name": "fdm_process_marlin_common", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_common", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "50", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "1000", + "top_surface_acceleration": "1000", + "travel_acceleration": "1000", + "inner_wall_acceleration": "1000", + "outer_wall_acceleration": "1000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "40", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "60", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "initial_layer_speed": "45", + "initial_layer_infill_speed": "60", + "outer_wall_speed": "60", + "inner_wall_speed": "80", + "internal_solid_infill_speed": "80", + "top_surface_speed": "50", + "gap_infill_speed": "80", + "sparse_infill_speed": "80", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "enable_arc_fitting": "0", + "compatible_printers": [ + "MyMarlin 0.4 nozzle" + ] +} diff --git a/.config/OrcaSlicer/system/Custom/process/fdm_process_mytoolchanger_common.json b/.config/OrcaSlicer/system/Custom/process/fdm_process_mytoolchanger_common.json new file mode 100644 index 0000000..88a499c --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/fdm_process_mytoolchanger_common.json @@ -0,0 +1,31 @@ +{ + "type": "process", + "name": "fdm_process_mytoolchanger_common", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_klipper_common", + "default_acceleration": "5000", + "top_surface_acceleration": "3000", + "travel_acceleration": "7000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "3000", + "initial_layer_acceleration": "500", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "120", + "inner_wall_speed": "200", + "internal_solid_infill_speed": "200", + "top_surface_speed": "100", + "gap_infill_speed": "100", + "sparse_infill_speed": "200", + "travel_speed": "350", + "exclude_object": "1", + "enable_prime_tower": "1", + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_spacing": "150%", + "wipe_tower_rotation_angle": "90", + "ooze_prevention": "1", + "standby_temperature_delta": "-40", + "preheat_time": "30", + "preheat_steps": "1" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/Custom/process/fdm_process_rrf_common.json b/.config/OrcaSlicer/system/Custom/process/fdm_process_rrf_common.json new file mode 100644 index 0000000..88cb3d4 --- /dev/null +++ b/.config/OrcaSlicer/system/Custom/process/fdm_process_rrf_common.json @@ -0,0 +1,109 @@ +{ + "type": "process", + "name": "fdm_process_rrf_common", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_common", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "50", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "3000", + "travel_acceleration": "7000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "3000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "120", + "inner_wall_speed": "200", + "internal_solid_infill_speed": "200", + "top_surface_speed": "100", + "gap_infill_speed": "100", + "sparse_infill_speed": "200", + "travel_speed": "350", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "enable_arc_fitting": "0", + "compatible_printers": [ + "MyRRF 0.4 nozzle" + ], + "exclude_object": "1" +} diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary.json new file mode 100644 index 0000000..e718a2a --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary.json @@ -0,0 +1,768 @@ +{ + "name": "OrcaFilamentLibrary", + "version": "02.03.00.03", + "force_update": "0", + "description": "Orca Filament Library", + "filament_list": [ + { + "name": "fdm_filament_common", + "sub_path": "filament/base/fdm_filament_common.json" + }, + { + "name": "fdm_filament_abs", + "sub_path": "filament/base/fdm_filament_abs.json" + }, + { + "name": "fdm_filament_asa", + "sub_path": "filament/base/fdm_filament_asa.json" + }, + { + "name": "fdm_filament_bvoh", + "sub_path": "filament/base/fdm_filament_bvoh.json" + }, + { + "name": "fdm_filament_eva", + "sub_path": "filament/base/fdm_filament_eva.json" + }, + { + "name": "fdm_filament_hips", + "sub_path": "filament/base/fdm_filament_hips.json" + }, + { + "name": "fdm_filament_pa", + "sub_path": "filament/base/fdm_filament_pa.json" + }, + { + "name": "fdm_filament_pc", + "sub_path": "filament/base/fdm_filament_pc.json" + }, + { + "name": "fdm_filament_pctg", + "sub_path": "filament/base/fdm_filament_pctg.json" + }, + { + "name": "fdm_filament_pe", + "sub_path": "filament/base/fdm_filament_pe.json" + }, + { + "name": "fdm_filament_pet", + "sub_path": "filament/base/fdm_filament_pet.json" + }, + { + "name": "fdm_filament_pha", + "sub_path": "filament/base/fdm_filament_pha.json" + }, + { + "name": "fdm_filament_pla", + "sub_path": "filament/base/fdm_filament_pla.json" + }, + { + "name": "fdm_filament_pp", + "sub_path": "filament/base/fdm_filament_pp.json" + }, + { + "name": "fdm_filament_ppa", + "sub_path": "filament/base/fdm_filament_ppa.json" + }, + { + "name": "fdm_filament_pps", + "sub_path": "filament/base/fdm_filament_pps.json" + }, + { + "name": "fdm_filament_pva", + "sub_path": "filament/base/fdm_filament_pva.json" + }, + { + "name": "fdm_filament_sbs", + "sub_path": "filament/base/fdm_filament_sbs.json" + }, + { + "name": "fdm_filament_tpu", + "sub_path": "filament/base/fdm_filament_tpu.json" + }, + { + "name": "Bambu ABS @base", + "sub_path": "filament/Bambu/Bambu ABS @base.json" + }, + { + "name": "Bambu ABS-GF @base", + "sub_path": "filament/Bambu/Bambu ABS-GF @base.json" + }, + { + "name": "Bambu Support for ABS @base", + "sub_path": "filament/Bambu/Bambu Support for ABS @base.json" + }, + { + "name": "Generic ABS @System", + "sub_path": "filament/Generic ABS @System.json" + }, + { + "name": "PolyLite ABS @base", + "sub_path": "filament/Polymaker/PolyLite ABS @base.json" + }, + { + "name": "Bambu ASA @base", + "sub_path": "filament/Bambu/Bambu ASA @base.json" + }, + { + "name": "Bambu ASA-Aero @base", + "sub_path": "filament/Bambu/Bambu ASA-Aero @base.json" + }, + { + "name": "Bambu ASA-CF @base", + "sub_path": "filament/Bambu/Bambu ASA-CF @base.json" + }, + { + "name": "Generic ASA @System", + "sub_path": "filament/Generic ASA @System.json" + }, + { + "name": "PolyLite ASA @base", + "sub_path": "filament/Polymaker/PolyLite ASA @base.json" + }, + { + "name": "Generic BVOH @System", + "sub_path": "filament/Generic BVOH @System.json" + }, + { + "name": "Generic EVA @System", + "sub_path": "filament/Generic EVA @System.json" + }, + { + "name": "Generic HIPS @System", + "sub_path": "filament/Generic HIPS @System.json" + }, + { + "name": "AliZ PA-CF @base", + "sub_path": "filament/AliZ/AliZ PA-CF @base.json" + }, + { + "name": "Bambu PA-CF @base", + "sub_path": "filament/Bambu/Bambu PA-CF @base.json" + }, + { + "name": "Bambu PA6-CF @base", + "sub_path": "filament/Bambu/Bambu PA6-CF @base.json" + }, + { + "name": "Bambu PA6-GF @base", + "sub_path": "filament/Bambu/Bambu PA6-GF @base.json" + }, + { + "name": "Bambu PAHT-CF @base", + "sub_path": "filament/Bambu/Bambu PAHT-CF @base.json" + }, + { + "name": "Bambu Support For PA/PET @base", + "sub_path": "filament/Bambu/Bambu Support For PA PET @base.json" + }, + { + "name": "Bambu Support G @base", + "sub_path": "filament/Bambu/Bambu Support G @base.json" + }, + { + "name": "Fiberon PA12-CF @base", + "sub_path": "filament/Polymaker/Fiberon PA12-CF @base.json" + }, + { + "name": "Fiberon PA6-CF @base", + "sub_path": "filament/Polymaker/Fiberon PA6-CF @base.json" + }, + { + "name": "Fiberon PA6-GF @base", + "sub_path": "filament/Polymaker/Fiberon PA6-GF @base.json" + }, + { + "name": "Fiberon PA612-CF @base", + "sub_path": "filament/Polymaker/Fiberon PA612-CF @base.json" + }, + { + "name": "Generic PA @System", + "sub_path": "filament/Generic PA @System.json" + }, + { + "name": "Generic PA-CF @System", + "sub_path": "filament/Generic PA-CF @System.json" + }, + { + "name": "Bambu PC @base", + "sub_path": "filament/Bambu/Bambu PC @base.json" + }, + { + "name": "Bambu PC FR @base", + "sub_path": "filament/Bambu/Bambu PC FR @base.json" + }, + { + "name": "Generic PC @System", + "sub_path": "filament/Generic PC @System.json" + }, + { + "name": "Generic PCTG @System", + "sub_path": "filament/Generic PCTG @System.json" + }, + { + "name": "Generic PE @System", + "sub_path": "filament/Generic PE @System.json" + }, + { + "name": "Generic PE-CF @System", + "sub_path": "filament/Generic PE-CF @System.json" + }, + { + "name": "AliZ PETG @base", + "sub_path": "filament/AliZ/AliZ PETG @base.json" + }, + { + "name": "Bambu PET-CF @base", + "sub_path": "filament/Bambu/Bambu PET-CF @base.json" + }, + { + "name": "Bambu PETG Basic @base", + "sub_path": "filament/Bambu/Bambu PETG Basic @base.json" + }, + { + "name": "Bambu PETG HF @base", + "sub_path": "filament/Bambu/Bambu PETG HF @base.json" + }, + { + "name": "Bambu PETG Translucent @base", + "sub_path": "filament/Bambu/Bambu PETG Translucent @base.json" + }, + { + "name": "Bambu PETG-CF @base", + "sub_path": "filament/Bambu/Bambu PETG-CF @base.json" + }, + { + "name": "Fiberon PET-CF @base", + "sub_path": "filament/Polymaker/Fiberon PET-CF @base.json" + }, + { + "name": "Fiberon PETG-ESD @base", + "sub_path": "filament/Polymaker/Fiberon PETG-ESD @base.json" + }, + { + "name": "Fiberon PETG-rCF @base", + "sub_path": "filament/Polymaker/Fiberon PETG-rCF @base.json" + }, + { + "name": "Generic PETG @System", + "sub_path": "filament/Generic PETG @System.json" + }, + { + "name": "Generic PETG HF @System", + "sub_path": "filament/Generic PETG HF @System.json" + }, + { + "name": "Generic PETG-CF @System", + "sub_path": "filament/Generic PETG-CF @System.json" + }, + { + "name": "PolyLite PETG @base", + "sub_path": "filament/Polymaker/PolyLite PETG @base.json" + }, + { + "name": "SUNLU PETG @base", + "sub_path": "filament/SUNLU/SUNLU PETG @base.json" + }, + { + "name": "Generic PHA @System", + "sub_path": "filament/Generic PHA @System.json" + }, + { + "name": "AliZ PLA @base", + "sub_path": "filament/AliZ/AliZ PLA @base.json" + }, + { + "name": "Bambu PLA Aero @base", + "sub_path": "filament/Bambu/Bambu PLA Aero @base.json" + }, + { + "name": "Bambu PLA Basic @base", + "sub_path": "filament/Bambu/Bambu PLA Basic @base.json" + }, + { + "name": "Bambu PLA Dynamic @base", + "sub_path": "filament/Bambu/Bambu PLA Dynamic @base.json" + }, + { + "name": "Bambu PLA Galaxy @base", + "sub_path": "filament/Bambu/Bambu PLA Galaxy @base.json" + }, + { + "name": "Bambu PLA Glow @base", + "sub_path": "filament/Bambu/Bambu PLA Glow @base.json" + }, + { + "name": "Bambu PLA Impact @base", + "sub_path": "filament/Bambu/Bambu PLA Impact @base.json" + }, + { + "name": "Bambu PLA Marble @base", + "sub_path": "filament/Bambu/Bambu PLA Marble @base.json" + }, + { + "name": "Bambu PLA Matte @base", + "sub_path": "filament/Bambu/Bambu PLA Matte @base.json" + }, + { + "name": "Bambu PLA Metal @base", + "sub_path": "filament/Bambu/Bambu PLA Metal @base.json" + }, + { + "name": "Bambu PLA Silk @base", + "sub_path": "filament/Bambu/Bambu PLA Silk @base.json" + }, + { + "name": "Bambu PLA Silk+ @base", + "sub_path": "filament/Bambu/Bambu PLA Silk+ @base.json" + }, + { + "name": "Bambu PLA Sparkle @base", + "sub_path": "filament/Bambu/Bambu PLA Sparkle @base.json" + }, + { + "name": "Bambu PLA Tough @base", + "sub_path": "filament/Bambu/Bambu PLA Tough @base.json" + }, + { + "name": "Bambu PLA Wood @base", + "sub_path": "filament/Bambu/Bambu PLA Wood @base.json" + }, + { + "name": "Bambu PLA-CF @base", + "sub_path": "filament/Bambu/Bambu PLA-CF @base.json" + }, + { + "name": "Bambu Support For PLA @base", + "sub_path": "filament/Bambu/Bambu Support For PLA @base.json" + }, + { + "name": "Bambu Support For PLA/PETG @base", + "sub_path": "filament/Bambu/Bambu Support For PLA-PETG @base.json" + }, + { + "name": "Bambu Support W @base", + "sub_path": "filament/Bambu/Bambu Support W @base.json" + }, + { + "name": "Generic PLA @System", + "sub_path": "filament/Generic PLA @System.json" + }, + { + "name": "Generic PLA High Speed @System", + "sub_path": "filament/Generic PLA High Speed @System.json" + }, + { + "name": "Generic PLA Matte @System", + "sub_path": "filament/Generic PLA Matte @System.json" + }, + { + "name": "Generic PLA-CF @System", + "sub_path": "filament/Generic PLA-CF @System.json" + }, + { + "name": "Overture Matte PLA @base", + "sub_path": "filament/Overture/Overture Matte PLA @base.json" + }, + { + "name": "Overture PLA @base", + "sub_path": "filament/Overture/Overture PLA @base.json" + }, + { + "name": "PolyLite PLA @base", + "sub_path": "filament/Polymaker/PolyLite PLA @base.json" + }, + { + "name": "PolyTerra PLA @base", + "sub_path": "filament/Polymaker/PolyTerra PLA @base.json" + }, + { + "name": "SUNLU PLA Marble @base", + "sub_path": "filament/SUNLU/SUNLU Marble PLA @base.json" + }, + { + "name": "SUNLU PLA Matte @base", + "sub_path": "filament/SUNLU/SUNLU PLA Matte @base.json" + }, + { + "name": "SUNLU PLA+ 2.0 @base", + "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @base.json" + }, + { + "name": "SUNLU PLA+ @base", + "sub_path": "filament/SUNLU/SUNLU PLA+ @base.json" + }, + { + "name": "SUNLU Silk PLA+ @base", + "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @base.json" + }, + { + "name": "SUNLU Wood PLA @base", + "sub_path": "filament/SUNLU/SUNLU Wood PLA @base.json" + }, + { + "name": "eSUN PLA+ @base", + "sub_path": "filament/eSUN/eSUN PLA+ @base.json" + }, + { + "name": "eSUN PETG @base", + "sub_path": "filament/eSUN/eSUN PETG @base.json" + }, + { + "name": "fdm_filament_pla_silk", + "sub_path": "filament/base/fdm_filament_pla_silk.json" + }, + { + "name": "Generic PP @System", + "sub_path": "filament/Generic PP @System.json" + }, + { + "name": "Generic PP-CF @System", + "sub_path": "filament/Generic PP-CF @System.json" + }, + { + "name": "Generic PP-GF @System", + "sub_path": "filament/Generic PP-GF @System.json" + }, + { + "name": "Bambu PPA-CF @base", + "sub_path": "filament/Bambu/Bambu PPA-CF @base.json" + }, + { + "name": "Generic PPA-CF @System", + "sub_path": "filament/Generic PPA-CF @System.json" + }, + { + "name": "Generic PPA-GF @System", + "sub_path": "filament/Generic PPA-GF @System.json" + }, + { + "name": "Bambu PPS-CF @base", + "sub_path": "filament/Bambu/Bambu PPS-CF @base.json" + }, + { + "name": "Bambu PVA @base", + "sub_path": "filament/Bambu/Bambu PVA @base.json" + }, + { + "name": "Generic PVA @System", + "sub_path": "filament/Generic PVA @System.json" + }, + { + "name": "Generic SBS @System", + "sub_path": "filament/Generic SBS @System.json" + }, + { + "name": "Bambu TPU 95A @base", + "sub_path": "filament/Bambu/Bambu TPU 95A @base.json" + }, + { + "name": "Bambu TPU 95A HF @base", + "sub_path": "filament/Bambu/Bambu TPU 95A HF @base.json" + }, + { + "name": "Generic TPU @System", + "sub_path": "filament/Generic TPU @System.json" + }, + { + "name": "Bambu ABS @System", + "sub_path": "filament/Bambu/Bambu ABS @System.json" + }, + { + "name": "Bambu ABS-GF @System", + "sub_path": "filament/Bambu/Bambu ABS-GF @System.json" + }, + { + "name": "Bambu Support for ABS @System", + "sub_path": "filament/Bambu/Bambu Support for ABS @System.json" + }, + { + "name": "PolyLite ABS @System", + "sub_path": "filament/Polymaker/PolyLite ABS @System.json" + }, + { + "name": "Bambu ASA @System", + "sub_path": "filament/Bambu/Bambu ASA @System.json" + }, + { + "name": "Bambu ASA-Aero @System", + "sub_path": "filament/Bambu/Bambu ASA-Aero @System.json" + }, + { + "name": "Bambu ASA-CF @System", + "sub_path": "filament/Bambu/Bambu ASA-CF @System.json" + }, + { + "name": "PolyLite ASA @System", + "sub_path": "filament/Polymaker/PolyLite ASA @System.json" + }, + { + "name": "AliZ PA-CF @System", + "sub_path": "filament/AliZ/AliZ PA-CF @System.json" + }, + { + "name": "Bambu PA-CF @System", + "sub_path": "filament/Bambu/Bambu PA-CF @System.json" + }, + { + "name": "Bambu PA6-CF @System", + "sub_path": "filament/Bambu/Bambu PA6-CF @System.json" + }, + { + "name": "Bambu PA6-GF @System", + "sub_path": "filament/Bambu/Bambu PA6-GF @System.json" + }, + { + "name": "Bambu PAHT-CF @System", + "sub_path": "filament/Bambu/Bambu PAHT-CF @System.json" + }, + { + "name": "Bambu Support For PA/PET @System", + "sub_path": "filament/Bambu/Bambu Support For PA PET @System.json" + }, + { + "name": "Bambu Support G @System", + "sub_path": "filament/Bambu/Bambu Support G @System.json" + }, + { + "name": "Fiberon PA12-CF @System", + "sub_path": "filament/Polymaker/Fiberon PA12-CF @System.json" + }, + { + "name": "Fiberon PA6-CF @System", + "sub_path": "filament/Polymaker/Fiberon PA6-CF @System.json" + }, + { + "name": "Fiberon PA6-GF @System", + "sub_path": "filament/Polymaker/Fiberon PA6-GF @System.json" + }, + { + "name": "Fiberon PA612-CF @System", + "sub_path": "filament/Polymaker/Fiberon PA612-CF @System.json" + }, + { + "name": "Bambu PC @System", + "sub_path": "filament/Bambu/Bambu PC @System.json" + }, + { + "name": "Bambu PC FR @System", + "sub_path": "filament/Bambu/Bambu PC FR @System.json" + }, + { + "name": "AliZ PETG @System", + "sub_path": "filament/AliZ/AliZ PETG @System.json" + }, + { + "name": "AliZ PETG-CF @base", + "sub_path": "filament/AliZ/AliZ PETG-CF @base.json" + }, + { + "name": "AliZ PETG-Metal @base", + "sub_path": "filament/AliZ/AliZ PETG-Metal @base.json" + }, + { + "name": "Bambu PET-CF @System", + "sub_path": "filament/Bambu/Bambu PET-CF @System.json" + }, + { + "name": "Bambu PETG Basic @System", + "sub_path": "filament/Bambu/Bambu PETG Basic @System.json" + }, + { + "name": "Bambu PETG HF @System", + "sub_path": "filament/Bambu/Bambu PETG HF @System.json" + }, + { + "name": "Bambu PETG Translucent @System", + "sub_path": "filament/Bambu/Bambu PETG Translucent @System.json" + }, + { + "name": "Bambu PETG-CF @System", + "sub_path": "filament/Bambu/Bambu PETG-CF @System.json" + }, + { + "name": "Fiberon PET-CF @System", + "sub_path": "filament/Polymaker/Fiberon PET-CF @System.json" + }, + { + "name": "Fiberon PETG-ESD @System", + "sub_path": "filament/Polymaker/Fiberon PETG-ESD @System.json" + }, + { + "name": "Fiberon PETG-rCF @System", + "sub_path": "filament/Polymaker/Fiberon PETG-rCF @System.json" + }, + { + "name": "PolyLite PETG @System", + "sub_path": "filament/Polymaker/PolyLite PETG @System.json" + }, + { + "name": "SUNLU PETG @System", + "sub_path": "filament/SUNLU/SUNLU PETG @System.json" + }, + { + "name": "AliZ PLA @System", + "sub_path": "filament/AliZ/AliZ PLA @System.json" + }, + { + "name": "Bambu PLA Aero @System", + "sub_path": "filament/Bambu/Bambu PLA Aero @System.json" + }, + { + "name": "Bambu PLA Basic @System", + "sub_path": "filament/Bambu/Bambu PLA Basic @System.json" + }, + { + "name": "Bambu PLA Dynamic @System", + "sub_path": "filament/Bambu/Bambu PLA Dynamic @System.json" + }, + { + "name": "Bambu PLA Galaxy @System", + "sub_path": "filament/Bambu/Bambu PLA Galaxy @System.json" + }, + { + "name": "Bambu PLA Glow @System", + "sub_path": "filament/Bambu/Bambu PLA Glow @System.json" + }, + { + "name": "Bambu PLA Impact @System", + "sub_path": "filament/Bambu/Bambu PLA Impact @System.json" + }, + { + "name": "Bambu PLA Marble @System", + "sub_path": "filament/Bambu/Bambu PLA Marble @System.json" + }, + { + "name": "Bambu PLA Matte @System", + "sub_path": "filament/Bambu/Bambu PLA Matte @System.json" + }, + { + "name": "Bambu PLA Metal @System", + "sub_path": "filament/Bambu/Bambu PLA Metal @System.json" + }, + { + "name": "Bambu PLA Silk @System", + "sub_path": "filament/Bambu/Bambu PLA Silk @System.json" + }, + { + "name": "Bambu PLA Silk+ @System", + "sub_path": "filament/Bambu/Bambu PLA Silk+ @System.json" + }, + { + "name": "Bambu PLA Sparkle @System", + "sub_path": "filament/Bambu/Bambu PLA Sparkle @System.json" + }, + { + "name": "Bambu PLA Tough @System", + "sub_path": "filament/Bambu/Bambu PLA Tough @System.json" + }, + { + "name": "Bambu PLA Wood @System", + "sub_path": "filament/Bambu/Bambu PLA Wood @System.json" + }, + { + "name": "Bambu PLA-CF @System", + "sub_path": "filament/Bambu/Bambu PLA-CF @System.json" + }, + { + "name": "Bambu Support For PLA @System", + "sub_path": "filament/Bambu/Bambu Support For PLA @System.json" + }, + { + "name": "Bambu Support For PLA/PETG @System", + "sub_path": "filament/Bambu/Bambu Support For PLA-PETG @System.json" + }, + { + "name": "Bambu Support W @System", + "sub_path": "filament/Bambu/Bambu Support W @System.json" + }, + { + "name": "Overture Matte PLA @System", + "sub_path": "filament/Overture/Overture Matte PLA @System.json" + }, + { + "name": "Overture PLA @System", + "sub_path": "filament/Overture/Overture PLA @System.json" + }, + { + "name": "PolyLite Dual PLA @System", + "sub_path": "filament/Polymaker/PolyLite Dual PLA @System.json" + }, + { + "name": "PolyLite PLA @System", + "sub_path": "filament/Polymaker/PolyLite PLA @System.json" + }, + { + "name": "PolyTerra Dual PLA @System", + "sub_path": "filament/Polymaker/PolyTerra Dual PLA @System.json" + }, + { + "name": "PolyTerra PLA @System", + "sub_path": "filament/Polymaker/PolyTerra PLA @System.json" + }, + { + "name": "SUNLU PLA Marble @System", + "sub_path": "filament/SUNLU/SUNLU Marble PLA @System.json" + }, + { + "name": "SUNLU PLA Matte @System", + "sub_path": "filament/SUNLU/SUNLU PLA Matte @System.json" + }, + { + "name": "SUNLU PLA+ 2.0 @System", + "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @System.json" + }, + { + "name": "SUNLU PLA+ @System", + "sub_path": "filament/SUNLU/SUNLU PLA+ @System.json" + }, + { + "name": "SUNLU Silk PLA+ @System", + "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @System.json" + }, + { + "name": "SUNLU Wood PLA @System", + "sub_path": "filament/SUNLU/SUNLU Wood PLA @System.json" + }, + { + "name": "eSUN PLA+ @System", + "sub_path": "filament/eSUN/eSUN PLA+ @System.json" + }, + { + "name": "eSUN ePLA-LW @System", + "sub_path": "filament/eSUN/eSUN ePLA-LW @System.json" + }, + { + "name": "eSUN PETG @System", + "sub_path": "filament/eSUN/eSUN PETG @System.json" + }, + { + "name": "Generic PLA Silk @System", + "sub_path": "filament/Generic PLA Silk @System.json" + }, + { + "name": "Bambu PPA-CF @System", + "sub_path": "filament/Bambu/Bambu PPA-CF @System.json" + }, + { + "name": "Bambu PVA @System", + "sub_path": "filament/Bambu/Bambu PVA @System.json" + }, + { + "name": "Bambu TPU 95A @System", + "sub_path": "filament/Bambu/Bambu TPU 95A @System.json" + }, + { + "name": "Bambu TPU 95A HF @System", + "sub_path": "filament/Bambu/Bambu TPU 95A HF @System.json" + }, + { + "name": "AliZ PETG-CF @System", + "sub_path": "filament/AliZ/AliZ PETG-CF @System.json" + }, + { + "name": "AliZ PETG-Metal @System", + "sub_path": "filament/AliZ/AliZ PETG-Metal @System.json" + } + ] +} diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @System.json new file mode 100644 index 0000000..a30b343 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "setting_id": "AliZGFSA04", + "name": "AliZ PA-CF @System", + "from": "system", + "instantiation": "true", + "inherits": "AliZ PA-CF @base", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @base.json new file mode 100644 index 0000000..bb7b348 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @base.json @@ -0,0 +1,77 @@ +{ + "type": "filament", + "filament_id": "AliZ003", + "name": "AliZ PA-CF @base", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_pa", + "filament_type": [ + "PA-CF" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "49.9" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_vendor": [ + "Aliz" + ], + "full_fan_speed_layer": [ + "2" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "pressure_advance": [ + "0.026" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "10" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @System.json new file mode 100644 index 0000000..cf91e38 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "setting_id": "AliZGFSA04", + "name": "AliZ PETG @System", + "from": "system", + "instantiation": "true", + "inherits": "AliZ PETG @base", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @base.json new file mode 100644 index 0000000..bb4a216 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @base.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "filament_id": "AliZ001", + "name": "AliZ PETG @base", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_pet", + "close_fan_the_first_x_layers": [ + "2" + ], + "enable_pressure_advance": [ + "0" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "49.9" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Aliz" + ], + "hot_plate_temp": [ + "79" + ], + "hot_plate_temp_initial_layer": [ + "79" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.036" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @System.json new file mode 100644 index 0000000..f52466a --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @System.json @@ -0,0 +1,8 @@ +{ + "type": "filament", + "name": "AliZ PETG-CF @System", + "inherits": "AliZ PETG-CF @base", + "from": "system", + "setting_id": "AliZGFSG50", + "instantiation": "true" +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @base.json new file mode 100644 index 0000000..83da3ae --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @base.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "name": "AliZ PETG-CF @base", + "inherits": "AliZ PETG @base", + "filament_id": "AliZ001-1", + "from": "system", + "instantiation": "false", + "fan_cooling_layer_time": [ + "30" + ], + "overhang_fan_speed": [ + "100" + ], + "close_fan_the_first_x_layers": [ + "2" + ], + "enable_pressure_advance": [ + "0" + ], + "pressure_advance": [ + "0.033" + ], + "fan_max_speed": [ + "35" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "49.9" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Aliz" + ], + "hot_plate_temp": [ + "79" + ], + "hot_plate_temp_initial_layer": [ + "79" + ], + "nozzle_temperature": [ + "275" + ], + "nozzle_temperature_initial_layer": [ + "275" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @System.json new file mode 100644 index 0000000..ba9940e --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "AliZ PETG-Metal @System", + "inherits": "AliZ PETG-Metal @base", + "from": "system", + "setting_id": "AliZGFSG50", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @base.json new file mode 100644 index 0000000..978b449 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @base.json @@ -0,0 +1,65 @@ +{ + "type": "filament", + "name": "AliZ PETG-Metal @base", + "inherits": "AliZ PETG @base", + "filament_id": "AliZ001-2", + "from": "system", + "instantiation": "false", + "fan_cooling_layer_time": [ + "30" + ], + "overhang_fan_speed": [ + "100" + ], + "close_fan_the_first_x_layers": [ + "2" + ], + "enable_pressure_advance": [ + "0" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "49.9" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_vendor": [ + "Aliz" + ], + "hot_plate_temp": [ + "79" + ], + "hot_plate_temp_initial_layer": [ + "79" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.036" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @System.json new file mode 100644 index 0000000..92f0c80 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "setting_id": "AliZGFSA04", + "name": "AliZ PLA @System", + "from": "system", + "instantiation": "true", + "inherits": "AliZ PLA @base", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @base.json new file mode 100644 index 0000000..f8dd45e --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @base.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "AliZ PLA @base", + "from": "system", + "filament_id": "AliZ002", + "instantiation": "false", + "inherits": "fdm_filament_pla", + "enable_pressure_advance": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_cost": [ + "69" + ], + "filament_density": [ + "1.27" + ], + "filament_vendor": [ + "Aliz" + ], + "filament_wipe_distance": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "4" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @System.json new file mode 100644 index 0000000..f4b66a3 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @System.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "name": "Bambu ABS @System", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "OGFSB00", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "slow_down_layer_time": [ + "12" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @base.json new file mode 100644 index 0000000..f5d8680 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @base.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "Bambu ABS @base", + "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "GFB00", + "instantiation": "false", + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "filament_cost": [ + "24.99" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_vendor": [ + "Bambu Lab" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @System.json new file mode 100644 index 0000000..a424cf4 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @System.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Bambu ABS-GF @System", + "inherits": "Bambu ABS-GF @base", + "from": "system", + "setting_id": "OGFSB50_00", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @base.json new file mode 100644 index 0000000..a67aa45 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @base.json @@ -0,0 +1,42 @@ +{ + "type": "filament", + "name": "Bambu ABS-GF @base", + "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "GFB50", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "fan_cooling_layer_time": [ + "12" + ], + "fan_max_speed": [ + "30" + ], + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.08" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "ABS-GF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "overhang_fan_speed": [ + "30" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @System.json new file mode 100644 index 0000000..fb443e0 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @System.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "Bambu ASA @System", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "OGFSB01_00", + "instantiation": "true", + "fan_min_speed": [ + "25" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @base.json new file mode 100644 index 0000000..322bb35 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @base.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Bambu ASA @base", + "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "GFB01", + "instantiation": "false", + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "35" + ], + "filament_cost": [ + "31.99" + ], + "filament_density": [ + "1.05" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @System.json new file mode 100644 index 0000000..3442434 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu ASA-Aero @System", + "inherits": "Bambu ASA-Aero @base", + "from": "system", + "setting_id": "OGFSB02_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @base.json new file mode 100644 index 0000000..4cfe7de --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @base.json @@ -0,0 +1,63 @@ +{ + "type": "filament", + "name": "Bambu ASA-Aero @base", + "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "GFB02", + "instantiation": "false", + "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide.", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "49.99" + ], + "filament_density": [ + "0.99" + ], + "filament_flow_ratio": [ + "0.52" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_type": [ + "ASA-Aero" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_wipe_distance": [ + "5" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "overhang_fan_speed": [ + "50" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_layer_time": [ + "5" + ], + "filament_scarf_seam_type": [ + "none" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @System.json new file mode 100644 index 0000000..4b104b1 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu ASA-CF @System", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "OGFSB51_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @base.json new file mode 100644 index 0000000..d8c3c0f --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @base.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Bambu ASA-CF @base", + "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "GFB51", + "instantiation": "false", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "25" + ], + "filament_cost": [ + "36.99" + ], + "filament_density": [ + "1.02" + ], + "filament_flow_ratio": [ + "0.9" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "ASA-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "275" + ], + "nozzle_temperature_initial_layer": [ + "275" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "108" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @System.json new file mode 100644 index 0000000..abcbce9 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @System.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Bambu PA-CF @System", + "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "OGFSN00", + "instantiation": "true", + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature": [ + "290" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "fan_cooling_layer_time": [ + "5" + ], + "full_fan_speed_layer": [ + "2" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @base.json new file mode 100644 index 0000000..f278ca5 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @base.json @@ -0,0 +1,39 @@ +{ + "type": "filament", + "name": "Bambu PA-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFN03", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "filament_cost": [ + "84.99" + ], + "filament_density": [ + "1.09" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "temperature_vitrification": [ + "170" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @System.json new file mode 100644 index 0000000..3a1d351 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @System", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "OGFSN05_02", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @base.json new file mode 100644 index 0000000..7df1f06 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @base.json @@ -0,0 +1,48 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFN05", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "79.99" + ], + "filament_density": [ + "1.10" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_type": [ + "PA6-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature": [ + "275" + ], + "nozzle_temperature_initial_layer": [ + "275" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "temperature_vitrification": [ + "170" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @System.json new file mode 100644 index 0000000..dce5c0d --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @System.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "name": "Bambu PA6-GF @System", + "inherits": "Bambu PA6-GF @base", + "from": "system", + "setting_id": "OGFSN08_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_max_volumetric_speed": [ + "10.5" + ], + "nozzle_temperature": [ + "265" + ], + "nozzle_temperature_initial_layer": [ + "265" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @base.json new file mode 100644 index 0000000..e2246b0 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @base.json @@ -0,0 +1,45 @@ +{ + "type": "filament", + "name": "Bambu PA6-GF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFN08", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "59.99" + ], + "filament_density": [ + "1.14" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_type": [ + "PA-GF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "full_fan_speed_layer": [ + "2" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "temperature_vitrification": [ + "180" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @System.json new file mode 100644 index 0000000..336e79d --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @System.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Bambu PAHT-CF @System", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "OGFSN04", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @base.json new file mode 100644 index 0000000..17ef395 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @base.json @@ -0,0 +1,45 @@ +{ + "type": "filament", + "name": "Bambu PAHT-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFN04", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "94.99" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "full_fan_speed_layer": [ + "2" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "temperature_vitrification": [ + "180" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @System.json new file mode 100644 index 0000000..1889a50 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @System.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Bambu PC @System", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "OGFSC00", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "slow_down_layer_time": [ + "12" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @base.json new file mode 100644 index 0000000..001f7c9 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC @base.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Bambu PC @base", + "inherits": "fdm_filament_pc", + "from": "system", + "filament_id": "GFC00", + "instantiation": "false", + "filament_vendor": [ + "Bambu Lab" + ], + "filament_cost": [ + "39.99" + ], + "filament_flow_ratio": [ + "0.94" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @System.json new file mode 100644 index 0000000..61eb80d --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @System.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Bambu PC FR @System", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "OGFSC01_00", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "slow_down_layer_time": [ + "12" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @base.json new file mode 100644 index 0000000..c01a0df --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @base.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "name": "Bambu PC FR @base", + "inherits": "fdm_filament_pc", + "from": "system", + "filament_id": "GFC01", + "instantiation": "false", + "filament_cost": [ + "0" + ], + "filament_density": [ + "1.19" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_vendor": [ + "Bambu Lab" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @System.json new file mode 100644 index 0000000..0ac52e4 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @System.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Bambu PET-CF @System", + "inherits": "Bambu PET-CF @base", + "from": "system", + "setting_id": "OGFST01", + "instantiation": "true", + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_min_speed": [ + "10" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json new file mode 100644 index 0000000..86f36ec --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json @@ -0,0 +1,90 @@ +{ + "type": "filament", + "name": "Bambu PET-CF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFT01", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "84.99" + ], + "filament_density": [ + "1.29" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "PET-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "required_nozzle_HRC": [ + "40" + ], + "supertack_plate_temp": [ + "80" + ], + "supertack_plate_temp_initial_layer": [ + "80" + ], + "slow_down_layer_time": [ + "2" + ], + "temperature_vitrification": [ + "185" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @System.json new file mode 100644 index 0000000..7d675a7 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @System.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "Bambu PETG Basic @System", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "OGFSG00_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "13" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json new file mode 100644 index 0000000..07f8064 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json @@ -0,0 +1,72 @@ +{ + "type": "filament", + "name": "Bambu PETG Basic @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFG00", + "instantiation": "false", + "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json new file mode 100644 index 0000000..c9574f1 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json @@ -0,0 +1,30 @@ +{ + "type": "filament", + "name": "Bambu PETG HF @System", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "OGFSG02_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "10" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @base.json new file mode 100644 index 0000000..dc50f6b --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @base.json @@ -0,0 +1,77 @@ +{ + "type": "filament", + "name": "Bambu PETG HF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFG02", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @System.json new file mode 100644 index 0000000..d481374 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @System.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "name": "Bambu PETG Translucent @System", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "OGFSG01_00", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.3" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json new file mode 100644 index 0000000..1582cd8 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json @@ -0,0 +1,78 @@ +{ + "type": "filament", + "name": "Bambu PETG Translucent @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFG01", + "instantiation": "false", + "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @System.json new file mode 100644 index 0000000..693f5de --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @System.json @@ -0,0 +1,30 @@ +{ + "type": "filament", + "name": "Bambu PETG-CF @System", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "OGFSG50_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "11.5" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_speed": [ + "100" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @base.json new file mode 100644 index 0000000..89eccb7 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @base.json @@ -0,0 +1,77 @@ +{ + "type": "filament", + "name": "Bambu PETG-CF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFG50", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "6" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @System.json new file mode 100644 index 0000000..9d9470c --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @System.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Bambu PLA Aero @System", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "OGFSA11_01", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json new file mode 100644 index 0000000..a53ae18 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json @@ -0,0 +1,45 @@ +{ + "type": "filament", + "name": "Bambu PLA Aero @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA11", + "instantiation": "false", + "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero).", + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "44.99" + ], + "filament_density": [ + "1.21" + ], + "filament_flow_ratio": [ + "0.6" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PLA-AERO" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_scarf_seam_type": [ + "none" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json new file mode 100644 index 0000000..4be0932 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "Bambu PLA Basic @System", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "OGFSA00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "21" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @base.json new file mode 100644 index 0000000..5e584c7 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @base.json @@ -0,0 +1,35 @@ +{ + "type": "filament", + "name": "Bambu PLA Basic @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA00", + "instantiation": "false", + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.26" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height":[ + "10%" + ], + "filament_scarf_gap":[ + "0%" + ], + "filament_scarf_length":[ + "10" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json new file mode 100644 index 0000000..886163c --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "Bambu PLA Dynamic @System", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "OGFSA13_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @base.json new file mode 100644 index 0000000..46b0345 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @base.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Bambu PLA Dynamic @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA13", + "instantiation": "false", + "filament_cost": [ + "31.99" + ], + "filament_density": [ + "1.26" + ], + "filament_vendor": [ + "Bambu Lab" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json new file mode 100644 index 0000000..dc636ff --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Bambu PLA Galaxy @System", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "OGFSA15_00", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @base.json new file mode 100644 index 0000000..a493400 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @base.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Bambu PLA Galaxy @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA15", + "instantiation": "false", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.19" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "Bambu Lab" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json new file mode 100644 index 0000000..acc74e9 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Bambu PLA Glow @System", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "OGFSA12_00", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @base.json new file mode 100644 index 0000000..2065782 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @base.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Bambu PLA Glow @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA12", + "instantiation": "false", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.26" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "temperature_vitrification": [ + "45" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @System.json new file mode 100644 index 0000000..015d320 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @System.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "setting_id": "OGFSA03", + "name": "Bambu PLA Impact @System", + "from": "system", + "instantiation": "true", + "inherits": "Bambu PLA Impact @base", + "filament_max_volumetric_speed": [ + "23.2" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @base.json new file mode 100644 index 0000000..f56887a --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @base.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Bambu PLA Impact @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA03", + "instantiation": "false", + "filament_cost": [ + "25.4" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_vendor": [ + "Bambu Lab" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json new file mode 100644 index 0000000..9be06a0 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Bambu PLA Marble @System", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "OGFSA07_00", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @base.json new file mode 100644 index 0000000..a342531 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @base.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "name": "Bambu PLA Marble @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA07", + "instantiation": "false", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json new file mode 100644 index 0000000..901e0f9 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "Bambu PLA Matte @System", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "OGFSA01", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @base.json new file mode 100644 index 0000000..700253f --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @base.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "name": "Bambu PLA Matte @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA01", + "instantiation": "false", + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height":[ + "5%" + ], + "filament_scarf_gap":[ + "0%" + ], + "filament_scarf_length":[ + "10" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json new file mode 100644 index 0000000..7dfed3f --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Bambu PLA Metal @System", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "OGFSA02", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "21" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @base.json new file mode 100644 index 0000000..d2edaf4 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @base.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "name": "Bambu PLA Metal @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA02", + "instantiation": "false", + "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_scarf_seam_type": [ + "none" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json new file mode 100644 index 0000000..9c6d268 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk @System", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "OGFSA05_01", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @base.json new file mode 100644 index 0000000..40b486e --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @base.json @@ -0,0 +1,39 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA05", + "instantiation": "false", + "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_scarf_height": [ + "5%" + ], + "filament_scarf_gap": [ + "0%" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json new file mode 100644 index 0000000..f36edd9 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk+ @System", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "OGFSA06_00", + "instantiation": "true", + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @base.json new file mode 100644 index 0000000..550061b --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @base.json @@ -0,0 +1,33 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk+ @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA06", + "instantiation": "false", + "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_scarf_height": [ + "5%" + ], + "filament_scarf_seam_type": [ + "all" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @System.json new file mode 100644 index 0000000..6f7ad62 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu PLA Sparkle @System", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "OGFSA08_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @base.json new file mode 100644 index 0000000..02bddb8 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @base.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "name": "Bambu PLA Sparkle @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA08", + "instantiation": "false", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.26" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json new file mode 100644 index 0000000..cc54b6f --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Bambu PLA Tough @System", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "OGFSA09_02", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "21" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @base.json new file mode 100644 index 0000000..489843c --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @base.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Bambu PLA Tough @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA09", + "instantiation": "false", + "filament_cost": [ + "28.99" + ], + "filament_density": [ + "1.26" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_scarf_seam_type": [ + "none" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @System.json new file mode 100644 index 0000000..97ac78e --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu PLA Wood @System", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "OGFSA16_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @base.json new file mode 100644 index 0000000..4501518 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @base.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "name": "Bambu PLA Wood @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA16", + "instantiation": "false", + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.21" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_vendor": [ + "Bambu Lab" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json new file mode 100644 index 0000000..e8322bd --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "name": "Bambu PLA-CF @System", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "OGFSA50_01", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @base.json new file mode 100644 index 0000000..b16b20c --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @base.json @@ -0,0 +1,50 @@ +{ + "type": "filament", + "name": "Bambu PLA-CF @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFA50", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "required_nozzle_HRC": [ + "40" + ], + "supertack_plate_temp": [ + "50" + ], + "supertack_plate_temp_initial_layer": [ + "50" + ], + "slow_down_layer_time": [ + "8" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @System.json new file mode 100644 index 0000000..aafc527 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "setting_id": "OGFSN06_00", + "name": "Bambu PPA-CF @System", + "from": "system", + "instantiation": "true", + "inherits": "Bambu PPA-CF @base", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @base.json new file mode 100644 index 0000000..d94bae6 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @base.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Bambu PPA-CF @base", + "inherits": "fdm_filament_ppa", + "from": "system", + "filament_id": "GFN06", + "instantiation": "false", + "filament_vendor": [ + "Bambu Lab" + ], + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials." +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPS-CF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPS-CF @base.json new file mode 100644 index 0000000..cef49fe --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PPS-CF @base.json @@ -0,0 +1,39 @@ +{ + "type": "filament", + "name": "Bambu PPS-CF @base", + "inherits": "fdm_filament_pps", + "from": "system", + "filament_id": "GFT02", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "fan_max_speed": [ + "30" + ], + "filament_cost": [ + "175" + ], + "filament_density": [ + "1.26" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PPS-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature_range_low": [ + "310" + ], + "overhang_fan_threshold": [ + "25%" + ], + "required_nozzle_HRC": [ + "40" + ], + "temperature_vitrification": [ + "220" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @System.json new file mode 100644 index 0000000..60b3eeb --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @System.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Bambu PVA @System", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "OGFSS04_00", + "instantiation": "true", + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @base.json new file mode 100644 index 0000000..f939629 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @base.json @@ -0,0 +1,33 @@ +{ + "type": "filament", + "name": "Bambu PVA @base", + "inherits": "fdm_filament_pva", + "from": "system", + "filament_id": "GFS04", + "instantiation": "false", + "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", + "filament_cost": [ + "79.98" + ], + "filament_density": [ + "1.27" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "slow_down_layer_time": [ + "7" + ], + "slow_down_min_speed": [ + "20" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @System.json new file mode 100644 index 0000000..35788b3 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @System.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Bambu Support For PA/PET @System", + "inherits": "Bambu Support For PA/PET @base", + "from": "system", + "setting_id": "OGFSS03_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @base.json new file mode 100644 index 0000000..3166617 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @base.json @@ -0,0 +1,36 @@ +{ + "type": "filament", + "name": "Bambu Support For PA/PET @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFS03", + "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", + "fan_cooling_layer_time": [ + "10" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.22" + ], + "filament_is_support": [ + "1" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_layer_time": [ + "6" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @System.json new file mode 100644 index 0000000..ac1fce2 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA @System", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "OGFSS02_02", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @base.json new file mode 100644 index 0000000..4fda6e0 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @base.json @@ -0,0 +1,33 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFS02", + "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "filament_cost": [ + "69.98" + ], + "filament_density": [ + "1.30" + ], + "filament_is_support": [ + "1" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_scarf_seam_type": [ + "none" + ], + "slow_down_layer_time": [ + "8" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @System.json new file mode 100644 index 0000000..ae15fb3 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @System.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA/PETG @System", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "OGFSS05_00", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json new file mode 100644 index 0000000..6eae368 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json @@ -0,0 +1,60 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA/PETG @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFS05", + "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "69.98" + ], + "filament_density": [ + "1.19" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @System.json new file mode 100644 index 0000000..a5ac0bc --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu Support G @System", + "inherits": "Bambu Support G @base", + "from": "system", + "setting_id": "OGFSS01", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @base.json new file mode 100644 index 0000000..7a60603 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @base.json @@ -0,0 +1,39 @@ +{ + "type": "filament", + "name": "Bambu Support G @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFS01", + "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", + "fan_cooling_layer_time": [ + "10" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.22" + ], + "filament_is_support": [ + "1" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "required_nozzle_HRC": [ + "3" + ], + "filament_scarf_seam_type": [ + "none" + ], + "slow_down_layer_time": [ + "6" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @System.json new file mode 100644 index 0000000..1bfd7ac --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu Support W @System", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "OGFSS00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @base.json new file mode 100644 index 0000000..d94a548 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @base.json @@ -0,0 +1,33 @@ +{ + "type": "filament", + "name": "Bambu Support W @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFS00", + "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "filament_cost": [ + "69.98" + ], + "filament_density": [ + "1.30" + ], + "filament_is_support": [ + "1" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_scarf_seam_type": [ + "none" + ], + "slow_down_layer_time": [ + "8" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @System.json new file mode 100644 index 0000000..ab731f1 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @System.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Bambu Support for ABS @System", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "OGFSS06_00", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json new file mode 100644 index 0000000..3bd74d4 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json @@ -0,0 +1,39 @@ +{ + "type": "filament", + "name": "Bambu Support for ABS @base", + "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "GFS06", + "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", + "fan_max_speed": [ + "30" + ], + "filament_cost": [ + "29.98" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "filament_scarf_seam_type": [ + "none" + ], + "temperature_vitrification": [ + "90" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @System.json new file mode 100644 index 0000000..9c3e244 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @System.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Bambu TPU 95A @System", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "OGFSU00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "3.6" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @base.json new file mode 100644 index 0000000..eb05556 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @base.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "name": "Bambu TPU 95A @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "GFU01", + "instantiation": "false", + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.22" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @System.json new file mode 100644 index 0000000..a96aacc --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu TPU 95A HF @System", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "OGFSU00_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @base.json new file mode 100644 index 0000000..6deab30 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @base.json @@ -0,0 +1,30 @@ +{ + "type": "filament", + "name": "Bambu TPU 95A HF @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "GFU00", + "instantiation": "false", + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.22" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ABS @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ABS @System.json new file mode 100644 index 0000000..518f53a --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ABS @System.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "OGFSA04", + "name": "Generic ABS @System", + "from": "system", + "instantiation": "true", + "renamed_from": "My Generic ABS", + "inherits": "fdm_filament_abs", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ASA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ASA @System.json new file mode 100644 index 0000000..95f34f4 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic ASA @System.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFB98", + "setting_id": "OGFSA04", + "name": "Generic ASA @System", + "from": "system", + "instantiation": "true", + "renamed_from": "My Generic ASA", + "inherits": "fdm_filament_asa", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic BVOH @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic BVOH @System.json new file mode 100644 index 0000000..383730d --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic BVOH @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Generic BVOH @System", + "inherits": "fdm_filament_bvoh", + "from": "system", + "setting_id": "OGFSS97_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic EVA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic EVA @System.json new file mode 100644 index 0000000..05fc6f7 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic EVA @System.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "name": "Generic EVA @System", + "inherits": "fdm_filament_eva", + "from": "system", + "setting_id": "OGFSR99_00", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic HIPS @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic HIPS @System.json new file mode 100644 index 0000000..af3541c --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic HIPS @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Generic HIPS @System", + "inherits": "fdm_filament_hips", + "from": "system", + "setting_id": "OGFSS98_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA @System.json new file mode 100644 index 0000000..4e28b8d --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA @System.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFN99", + "setting_id": "OGFSA04", + "name": "Generic PA @System", + "from": "system", + "instantiation": "true", + "renamed_from": "My Generic PA", + "inherits": "fdm_filament_pa", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA-CF @System.json new file mode 100644 index 0000000..2f91467 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PA-CF @System.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "OGFSA04", + "name": "Generic PA-CF @System", + "from": "system", + "instantiation": "true", + "renamed_from": "My Generic PA-CF", + "inherits": "fdm_filament_pa", + "filament_type": [ + "PA-CF" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PC @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PC @System.json new file mode 100644 index 0000000..1724ee0 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PC @System.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFC99", + "setting_id": "OGFSA04", + "name": "Generic PC @System", + "from": "system", + "instantiation": "true", + "renamed_from": "My Generic PC", + "inherits": "fdm_filament_pc", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PCTG @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PCTG @System.json new file mode 100644 index 0000000..fb402b2 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PCTG @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Generic PCTG @System", + "inherits": "fdm_filament_pctg", + "from": "system", + "setting_id": "OGFSG97_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE @System.json new file mode 100644 index 0000000..9da06f5 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE @System.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "name": "Generic PE @System", + "inherits": "fdm_filament_pe", + "from": "system", + "setting_id": "OGFSP99_00", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE-CF @System.json new file mode 100644 index 0000000..337d596 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PE-CF @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Generic PE-CF @System", + "inherits": "fdm_filament_pe", + "from": "system", + "setting_id": "OGFSP98_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG @System.json new file mode 100644 index 0000000..14fcba5 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG @System.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFG99", + "setting_id": "OGFSA04", + "name": "Generic PETG @System", + "from": "system", + "instantiation": "true", + "renamed_from": "My Generic PETG", + "inherits": "fdm_filament_pet", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG HF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG HF @System.json new file mode 100644 index 0000000..d749767 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG HF @System.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Generic PETG HF @System", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "OGFSG96_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "20" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json new file mode 100644 index 0000000..e5d3427 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "name": "Generic PETG-CF @System", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "OGFSG50", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_max_volumetric_speed": [ + "11.5" + ], + "overhang_fan_speed": [ + "100" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PHA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PHA @System.json new file mode 100644 index 0000000..8cdc772 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PHA @System.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "name": "Generic PHA @System", + "inherits": "fdm_filament_pha", + "from": "system", + "setting_id": "OGFSR98_00", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA @System.json new file mode 100644 index 0000000..de33d3d --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA @System.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "setting_id": "OGFSA04", + "name": "Generic PLA @System", + "from": "system", + "instantiation": "true", + "renamed_from": "My Generic PLA", + "inherits": "fdm_filament_pla", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json new file mode 100644 index 0000000..b5ff0b4 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @System", + "inherits": "fdm_filament_pla", + "filament_id": "GFL95", + "from": "system", + "setting_id": "OGFSL95_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_layer_time": [ + "4" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json new file mode 100644 index 0000000..eee0834 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Generic PLA Matte @System", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "OGFSL99_02", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "11" + ], + "filament_retraction_length": [ + "0.8" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Silk @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Silk @System.json new file mode 100644 index 0000000..a1c7e90 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA Silk @System.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Generic PLA Silk @System", + "inherits": "fdm_filament_pla_silk", + "renamed_from": "Generic Silk PLA @System", + "from": "system", + "setting_id": "OGFSL99_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "7.5" + ], + "filament_retraction_length": [ + "0.5" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA-CF @System.json new file mode 100644 index 0000000..d6bb799 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PLA-CF @System.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "filament_id": "GFL98", + "setting_id": "OGFSA04", + "name": "Generic PLA-CF @System", + "from": "system", + "instantiation": "true", + "renamed_from": "My Generic PLA-CF", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": [ + "0.95" + ], + "filament_type": [ + "PLA-CF" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP @System.json new file mode 100644 index 0000000..be923c7 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP @System.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "name": "Generic PP @System", + "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "OGFSP97_00", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-CF @System.json new file mode 100644 index 0000000..8919ceb --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-CF @System.json @@ -0,0 +1,22 @@ +{ + "type": "filament", + "name": "Generic PP-CF @System", + "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "OGFSP96_00", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "filament_cost": [ + "77.99" + ], + "filament_density": [ + "1.01" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PP-CF" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-GF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-GF @System.json new file mode 100644 index 0000000..11cebe3 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PP-GF @System.json @@ -0,0 +1,22 @@ +{ + "type": "filament", + "name": "Generic PP-GF @System", + "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "OGFSP97_03", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "filament_cost": [ + "59.99" + ], + "filament_density": [ + "1.05" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PP-GF" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-CF @System.json new file mode 100644 index 0000000..408d752 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-CF @System.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "name": "Generic PPA-CF @System", + "inherits": "fdm_filament_ppa", + "from": "system", + "setting_id": "OGFSN97_00", + "instantiation": "true", + "fan_max_speed": [ + "35" + ], + "filament_max_volumetric_speed": [ + "6.5" + ], + "overhang_fan_threshold": [ + "25%" + ], + "filament_type": [ + "PPA-CF" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-GF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-GF @System.json new file mode 100644 index 0000000..57ee347 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PPA-GF @System.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Generic PPA-GF @System", + "inherits": "fdm_filament_ppa", + "filament_id": "GFN96", + "from": "system", + "setting_id": "OGFSN96_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PPA-GF" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PVA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PVA @System.json new file mode 100644 index 0000000..20b1c49 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic PVA @System.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFS99", + "setting_id": "OGFSA04", + "name": "Generic PVA @System", + "from": "system", + "instantiation": "true", + "renamed_from": "My Generic PVA", + "inherits": "fdm_filament_pva", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic SBS @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic SBS @System.json new file mode 100644 index 0000000..3847e37 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic SBS @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Generic SBS @System", + "inherits": "fdm_filament_sbs", + "from": "system", + "setting_id": "OGFSL99", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic TPU @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic TPU @System.json new file mode 100644 index 0000000..137d30d --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Generic TPU @System.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFU99", + "setting_id": "OGFSA04", + "name": "Generic TPU @System", + "from": "system", + "instantiation": "true", + "renamed_from": "My Generic TPU", + "inherits": "fdm_filament_tpu", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @System.json new file mode 100644 index 0000000..c0fa43d --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @System", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "OGFSL05_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @base.json new file mode 100644 index 0000000..7e9e9a1 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @base.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFL05", + "instantiation": "false", + "filament_cost": [ + "24.52" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "Overture" + ], + "slow_down_layer_time": [ + "6" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @System.json new file mode 100644 index 0000000..cdaf7e6 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Overture PLA @System", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "OGFSL04_05", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @base.json new file mode 100644 index 0000000..18e711b --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Overture/Overture PLA @base.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Overture PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFL04", + "instantiation": "false", + "filament_cost": [ + "24.15" + ], + "filament_density": [ + "1.2" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "Overture" + ], + "slow_down_layer_time": [ + "6" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @System.json new file mode 100644 index 0000000..0b8c00c --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Fiberon PA12-CF @System", + "inherits": "Fiberon PA12-CF @base", + "from": "system", + "setting_id": "OGFSL52_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @base.json new file mode 100644 index 0000000..e2a5bf6 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF @base.json @@ -0,0 +1,71 @@ +{ + "type": "filament", + "name": "Fiberon PA12-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFL52", + "instantiation": "false", + "eng_plate_temp": [ + "40" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "100" + ], + "filament_cost": [ + "99.99" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Polymaker" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "temperature_vitrification": [ + "131" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @System.json new file mode 100644 index 0000000..1b0e99f --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Fiberon PA6-CF @System", + "inherits": "Fiberon PA6-CF @base", + "from": "system", + "setting_id": "OGFSL50_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @base.json new file mode 100644 index 0000000..9d59fba --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @base.json @@ -0,0 +1,68 @@ +{ + "type": "filament", + "name": "Fiberon PA6-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFL50", + "instantiation": "false", + "eng_plate_temp": [ + "40" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "100" + ], + "filament_cost": [ + "83.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PA6-CF" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "temperature_vitrification": [ + "215" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @System.json new file mode 100644 index 0000000..f774cf1 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Fiberon PA6-GF @System", + "inherits": "Fiberon PA6-GF @base", + "from": "system", + "setting_id": "OGFSL51_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @base.json new file mode 100644 index 0000000..9ab9237 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF @base.json @@ -0,0 +1,71 @@ +{ + "type": "filament", + "name": "Fiberon PA6-GF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFL51", + "instantiation": "false", + "eng_plate_temp": [ + "40" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "100" + ], + "filament_cost": [ + "63.99" + ], + "filament_density": [ + "1.2" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PA-GF" + ], + "filament_vendor": [ + "Polymaker" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "temperature_vitrification": [ + "191" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @System.json new file mode 100644 index 0000000..7f297ae --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Fiberon PA612-CF @System", + "inherits": "Fiberon PA612-CF @base", + "from": "system", + "setting_id": "OGFSL53_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @base.json new file mode 100644 index 0000000..f545b1e --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF @base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Fiberon PA612-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "GFL53", + "instantiation": "false", + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "94.99" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_vendor": [ + "Polymaker" + ], + "full_fan_speed_layer": [ + "2" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "temperature_vitrification": [ + "180" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @System.json new file mode 100644 index 0000000..9a0d2ed --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Fiberon PET-CF @System", + "inherits": "Fiberon PET-CF @base", + "from": "system", + "setting_id": "OGFSL54_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @base.json new file mode 100644 index 0000000..701883f --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @base.json @@ -0,0 +1,86 @@ +{ + "type": "filament", + "name": "Fiberon PET-CF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFL54", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "242" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "89.99" + ], + "filament_density": [ + "1.34" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PET-CF" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "270" + ], + "required_nozzle_HRC": [ + "40" + ], + "supertack_plate_temp": [ + "80" + ], + "supertack_plate_temp_initial_layer": [ + "80" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "147" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @System.json new file mode 100644 index 0000000..14bca9c --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @System.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Fiberon PETG-ESD @System", + "inherits": "Fiberon PETG-ESD @base", + "from": "system", + "setting_id": "OGFSL06_00", + "instantiation": "true", + "filament_cost": [ + "29.99" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @base.json new file mode 100644 index 0000000..03c777e --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @base.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "name": "Fiberon PETG-ESD @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFL06", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "15" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "0" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "76" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @System.json new file mode 100644 index 0000000..5c661c1 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Fiberon PETG-rCF @System", + "inherits": "Fiberon PETG-rCF @base", + "from": "system", + "setting_id": "OGFSL55_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @base.json new file mode 100644 index 0000000..e039bd5 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @base.json @@ -0,0 +1,77 @@ +{ + "type": "filament", + "name": "Fiberon PETG-rCF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFL55", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "12" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "39.99" + ], + "filament_density": [ + "1.3" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @System.json new file mode 100644 index 0000000..2ee4e44 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "PolyLite ABS @System", + "inherits": "PolyLite ABS @base", + "from": "system", + "setting_id": "OGFSB60_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @base.json new file mode 100644 index 0000000..539a1d1 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ABS @base.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "PolyLite ABS @base", + "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "GFB60", + "instantiation": "false", + "filament_cost": [ + "26.9" + ], + "filament_density": [ + "1.03" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "Polymaker" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @System.json new file mode 100644 index 0000000..09128d7 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "PolyLite ASA @System", + "inherits": "PolyLite ASA @base", + "from": "system", + "setting_id": "OGFSB61_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @base.json new file mode 100644 index 0000000..d29a9a2 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite ASA @base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "PolyLite ASA @base", + "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "GFB61", + "instantiation": "false", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_cost": [ + "23.6" + ], + "filament_density": [ + "1.02" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite Dual PLA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite Dual PLA @System.json new file mode 100644 index 0000000..24d06bf --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite Dual PLA @System.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "true", + "name": "PolyLite Dual PLA @System", + "renamed_from": "PolyLite Dual PLA", + "setting_id": "O64868365", + "inherits": "PolyLite PLA @base", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @System.json new file mode 100644 index 0000000..f9bafce --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @System.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "PolyLite PETG @System", + "inherits": "PolyLite PETG @base", + "from": "system", + "setting_id": "OGFSG60_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "11.5" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @base.json new file mode 100644 index 0000000..f010031 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @base.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "PolyLite PETG @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFG60", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @System.json new file mode 100644 index 0000000..b779aeb --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @System.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "PolyLite PLA @System", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "OGFSL19", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "15" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @base.json new file mode 100644 index 0000000..1e7f4d1 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @base.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFL00", + "instantiation": "false", + "filament_cost": [ + "25.4" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_vendor": [ + "Polymaker" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra Dual PLA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra Dual PLA @System.json new file mode 100644 index 0000000..b2b4efd --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra Dual PLA @System.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "true", + "name": "PolyTerra Dual PLA @System", + "renamed_from": "PolyTerra Dual PLA", + "setting_id": "O1258005940", + "inherits": "PolyTerra PLA @base", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @System.json new file mode 100644 index 0000000..b6def8a --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @System.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "PolyTerra PLA @System", + "inherits": "PolyTerra PLA @base", + "renamed_from": "PolyTerra PLA", + "from": "system", + "setting_id": "OGFSL18", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "22" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @base.json new file mode 100644 index 0000000..2deb2d9 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA @base.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "name": "PolyTerra PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFL01", + "instantiation": "false", + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.31" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Polymaker" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @System.json new file mode 100644 index 0000000..c178dd7 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @System.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "SUNLU PLA Marble @System", + "inherits": "SUNLU PLA Marble @base", + "from": "system", + "setting_id": "OSNLS06", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @base.json new file mode 100644 index 0000000..5448265 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @base.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "name": "SUNLU PLA Marble @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFSNL06", + "instantiation": "false", + "filament_cost": [ + "31.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "SUNLU" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @System.json new file mode 100644 index 0000000..76cffa6 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @System.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "SUNLU PETG @System", + "inherits": "SUNLU PETG @base", + "from": "system", + "setting_id": "OSNLS08", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "14" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @base.json new file mode 100644 index 0000000..9d27244 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @base.json @@ -0,0 +1,81 @@ +{ + "type": "filament", + "name": "SUNLU PETG @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "GFSNL08", + "instantiation": "false", + "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "22.99" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "SUNLU" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "temperature_vitrification": [ + "68" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @System.json new file mode 100644 index 0000000..db115c3 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "SUNLU PLA Matte @System", + "inherits": "SUNLU PLA Matte @base", + "from": "system", + "setting_id": "OSNLS02", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @base.json new file mode 100644 index 0000000..a79b7b6 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @base.json @@ -0,0 +1,50 @@ +{ + "type": "filament", + "name": "SUNLU PLA Matte @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFSNL02", + "instantiation": "false", + "filament_cost": [ + "25.99" + ], + "filament_density": [ + "1.3" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "SUNLU" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height":[ + "5%" + ], + "filament_scarf_gap":[ + "0%" + ], + "filament_scarf_length":[ + "10" + ], + "temperature_vitrification": [ + "54" + ], + "nozzle_temperature_range_high": [ + "245" + ], + "nozzle_temperature_range_low": [ + "205" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @System.json new file mode 100644 index 0000000..82bc7ae --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "SUNLU PLA+ 2.0 @System", + "inherits": "SUNLU PLA+ 2.0 @base", + "from": "system", + "setting_id": "OSNLS04", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @base.json new file mode 100644 index 0000000..eddb7e9 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @base.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "SUNLU PLA+ 2.0 @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFSNL04", + "instantiation": "false", + "filament_cost": [ + "18.99" + ], + "filament_density": [ + "1.21" + ], + "filament_flow_ratio": [ + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "SUNLU" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height":[ + "5%" + ], + "filament_scarf_gap":[ + "0%" + ], + "filament_scarf_length":[ + "10" + ], + "temperature_vitrification": [ + "54" + ] +} diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @System.json new file mode 100644 index 0000000..e341ff4 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "SUNLU PLA+ @System", + "inherits": "SUNLU PLA+ @base", + "from": "system", + "setting_id": "OSNLS03", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @base.json new file mode 100644 index 0000000..e7efac8 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @base.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "SUNLU PLA+ @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFSNL03", + "instantiation": "false", + "filament_cost": [ + "18.99" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "SUNLU" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height":[ + "5%" + ], + "filament_scarf_gap":[ + "0%" + ], + "filament_scarf_length":[ + "10" + ], + "temperature_vitrification": [ + "54" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @System.json new file mode 100644 index 0000000..1d35100 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "SUNLU Silk PLA+ @System", + "inherits": "SUNLU Silk PLA+ @base", + "from": "system", + "setting_id": "OSNLS05", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @base.json new file mode 100644 index 0000000..5b8fd61 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @base.json @@ -0,0 +1,51 @@ +{ + "type": "filament", + "name": "SUNLU Silk PLA+ @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFSNL05", + "instantiation": "false", + "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "SUNLU" + ], + "filament_scarf_height": [ + "5%" + ], + "filament_scarf_gap": [ + "0%" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "temperature_vitrification": [ + "54" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @System.json new file mode 100644 index 0000000..82ab22e --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "SUNLU Wood PLA @System", + "inherits": "SUNLU Wood PLA @base", + "from": "system", + "setting_id": "OSNLS07", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @base.json new file mode 100644 index 0000000..65af44e --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @base.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "SUNLU Wood PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFSNL07", + "instantiation": "false", + "filament_cost": [ + "26.99" + ], + "filament_density": [ + "1.10" + ], + "filament_flow_ratio": [ + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "4" + ], + "filament_retraction_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "SUNLU" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height":[ + "5%" + ], + "filament_scarf_gap":[ + "0%" + ], + "filament_scarf_length":[ + "10" + ], + "temperature_vitrification": [ + "54" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json new file mode 100644 index 0000000..e5db0db --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json @@ -0,0 +1,94 @@ +{ + "type": "filament", + "name": "fdm_filament_abs", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "activate_air_filtration": [ + "0" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "ABS" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "105" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "105" + ], + "filament_flow_ratio": [ + "0.926" + ], + "temperature_vitrification": [ + "110" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json new file mode 100644 index 0000000..fd8ea36 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json @@ -0,0 +1,94 @@ +{ + "type": "filament", + "name": "fdm_filament_asa", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "activate_air_filtration": [ + "0" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "ASA" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "105" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "105" + ], + "filament_flow_ratio": [ + "0.926" + ], + "temperature_vitrification": [ + "110" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json new file mode 100644 index 0000000..1e2a275 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json @@ -0,0 +1,89 @@ +{ + "type": "filament", + "name": "fdm_filament_bvoh", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "filament_id": "GFS97", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "69.99" + ], + "filament_density": [ + "1.13" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "BVOH" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_common.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_common.json new file mode 100644 index 0000000..70862e9 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_common.json @@ -0,0 +1,187 @@ +{ + "type": "filament", + "name": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "60" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "35" + ], + "filament_cost": [ + "0" + ], + "filament_density": [ + "0" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_settings_id": [ + "" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height": [ + "10%" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_length": [ + "10" + ], + "filament_shrink": [ + "100%" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "200" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "95%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "3" + ], + "supertack_plate_temp": [ + "45" + ], + "supertack_plate_temp_initial_layer": [ + "45" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json new file mode 100644 index 0000000..9e77bf4 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "fdm_filament_eva", + "inherits": "fdm_filament_common", + "filament_id": "GFR99", + "from": "system", + "instantiation": "false", + "filament_type": [ + "EVA" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json new file mode 100644 index 0000000..ce42a7a --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json @@ -0,0 +1,86 @@ +{ + "type": "filament", + "name": "fdm_filament_hips", + "inherits": "fdm_filament_common", + "filament_id": "GFS98", + "from": "system", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "eng_plate_temp": [ + "90" + ], + "hot_plate_temp": [ + "90" + ], + "textured_plate_temp": [ + "90" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "fan_cooling_layer_time": [ + "10" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "HIPS" + ], + "filament_density": [ + "1.06" + ], + "filament_cost": [ + "22.99" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "0" + ], + "overhang_fan_threshold": [ + "25%" + ], + "overhang_fan_speed": [ + "80" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "6" + ], + "additional_cooling_fan_speed": [ + "0" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json new file mode 100644 index 0000000..3c7c03a --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json @@ -0,0 +1,89 @@ +{ + "type": "filament", + "name": "fdm_filament_pa", + "inherits": "fdm_filament_common", + "filament_id": "GFN99", + "from": "system", + "instantiation": "false", + "activate_air_filtration": [ + "0" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "4" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "PA" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "30" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "108" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json new file mode 100644 index 0000000..ba79aff --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json @@ -0,0 +1,92 @@ +{ + "type": "filament", + "name": "fdm_filament_pc", + "inherits": "fdm_filament_common", + "filament_id": "GFC99", + "from": "system", + "instantiation": "false", + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.04" + ], + "filament_type": [ + "PC" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "60" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "120" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_flow_ratio": [ + "0.94" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json new file mode 100644 index 0000000..21eb7ed --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json @@ -0,0 +1,68 @@ +{ + "type": "filament", + "name": "fdm_filament_pctg", + "inherits": "fdm_filament_common", + "filament_id": "GFG97", + "from": "system", + "instantiation": "false", + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.27" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PCTG" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "255" + ], + "nozzle_temperature_initial_layer": [ + "255" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json new file mode 100644 index 0000000..d15ac9a --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json @@ -0,0 +1,89 @@ +{ + "type": "filament", + "name": "fdm_filament_pe", + "inherits": "fdm_filament_common", + "filament_id": "GFP99", + "from": "system", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PE" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json new file mode 100644 index 0000000..f4a31b7 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json @@ -0,0 +1,68 @@ +{ + "type": "filament", + "name": "fdm_filament_pet", + "inherits": "fdm_filament_common", + "filament_id": "GFG99", + "from": "system", + "instantiation": "false", + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.27" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PETG" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "255" + ], + "nozzle_temperature_initial_layer": [ + "255" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "70" + ], + "supertack_plate_temp_initial_layer": [ + "70" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json new file mode 100644 index 0000000..35d3c9a --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json @@ -0,0 +1,89 @@ +{ + "type": "filament", + "name": "fdm_filament_pha", + "inherits": "fdm_filament_common", + "filament_id": "GFR98", + "from": "system", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "27.99" + ], + "filament_density": [ + "1.24" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PHA" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "120" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json new file mode 100644 index 0000000..45e21a4 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json @@ -0,0 +1,89 @@ +{ + "type": "filament", + "name": "fdm_filament_pla", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "filament_id": "GFL99", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_gap": [ + "15%" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_flow_ratio": [ + "0.98" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json new file mode 100644 index 0000000..9e407db --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "fdm_filament_pla_silk", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFL96", + "instantiation": "false", + "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", + "filament_flow_ratio": [ + "0.98" + ], + "slow_down_layer_time": [ + "8" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json new file mode 100644 index 0000000..bd6701b --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json @@ -0,0 +1,89 @@ +{ + "type": "filament", + "name": "fdm_filament_pp", + "inherits": "fdm_filament_common", + "filament_id": "GFP97", + "from": "system", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "0.93" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PP" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "235" + ], + "nozzle_temperature_initial_layer": [ + "235" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json new file mode 100644 index 0000000..19409ea --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json @@ -0,0 +1,95 @@ +{ + "type": "filament", + "name": "fdm_filament_ppa", + "inherits": "fdm_filament_common", + "filament_id": "GFN97", + "from": "system", + "instantiation": "false", + "activate_air_filtration": [ + "0" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "PPA-CF" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "210" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json new file mode 100644 index 0000000..b8d3661 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json @@ -0,0 +1,85 @@ +{ + "type": "filament", + "name": "fdm_filament_pps", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "chamber_temperatures": [ + "60" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "0" + ], + "filament_density": [ + "1.36" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "4" + ], + "filament_type": [ + "PPS" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "nozzle_temperature": [ + "320" + ], + "nozzle_temperature_initial_layer": [ + "320" + ], + "nozzle_temperature_range_high": [ + "340" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "30" + ], + "overhang_fan_threshold": [ + "0%" + ], + "slow_down_layer_time": [ + "2" + ], + "temperature_vitrification": [ + "125" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json new file mode 100644 index 0000000..1b55c2b --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json @@ -0,0 +1,97 @@ +{ + "type": "filament", + "name": "fdm_filament_pva", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "PVA" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_flow_ratio": [ + "0.95" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json new file mode 100644 index 0000000..69ce757 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "fdm_filament_sbs", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "filament_id": "GFL99", + "fan_cooling_layer_time": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "SBS" + ], + "filament_density": [ + "1.02" + ], + "filament_cost": [ + "15" + ], + "cool_plate_temp": [ + "70" + ], + "eng_plate_temp": [ + "70" + ], + "hot_plate_temp": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_initial_layer": [ + "235" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "fan_min_speed": [ + "0" + ], + "overhang_fan_threshold": [ + "50%" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "nozzle_temperature": [ + "235" + ], + "temperature_vitrification": [ + "70" + ], + "nozzle_temperature_range_low": [ + "215" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "4" + ], + "additional_cooling_fan_speed": [ + "40" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json new file mode 100644 index 0000000..cc84b4d --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json @@ -0,0 +1,82 @@ +{ + "type": "filament", + "name": "fdm_filament_tpu", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "cool_plate_temp": [ + "30" + ], + "cool_plate_temp_initial_layer": [ + "30" + ], + "eng_plate_temp": [ + "30" + ], + "eng_plate_temp_initial_layer": [ + "30" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_max_volumetric_speed": [ + "3.2" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_type": [ + "TPU" + ], + "hot_plate_temp": [ + "35" + ], + "hot_plate_temp_initial_layer": [ + "35" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "temperature_vitrification": [ + "30" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @System.json new file mode 100644 index 0000000..eacb079 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "eSUN PETG @System", + "inherits": "eSUN PETG @base", + "from": "system", + "setting_id": "PET01_00", + "instantiation": "true", + "compatible_printers": [] +} diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @base.json new file mode 100644 index 0000000..3a44923 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PETG @base.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "eSUN PETG @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "ESN03", + "instantiation": "false", + "filament_vendor": [ + "eSUN" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "30" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "temperature_vitrification": [ + "64" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [] +} diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @System.json new file mode 100644 index 0000000..f72868f --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "eSUN PLA+ @System", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "OGFSL03_00", + "instantiation": "true", + "compatible_printers": [] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @base.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @base.json new file mode 100644 index 0000000..ac6bcd0 --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN PLA+ @base.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "eSUN PLA+ @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "GFL03", + "instantiation": "false", + "filament_cost": [ + "22.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "eSUN" + ], + "slow_down_layer_time": [ + "6" + ] +} \ No newline at end of file diff --git a/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN ePLA-LW @System.json b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN ePLA-LW @System.json new file mode 100644 index 0000000..e56766f --- /dev/null +++ b/.config/OrcaSlicer/system/OrcaFilamentLibrary/filament/eSUN/eSUN ePLA-LW @System.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "eSUN ePLA-LW @System", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "ESN02", + "setting_id": "LWSL02_00", + "instantiation": "true", + "filament_type": ["PLA-AERO"], + "filament_cost": [ + "33.99" + ], + "filament_density": [ + "1.2" + ], + "filament_flow_ratio": [ + "0.48" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_vendor": [ + "eSUN" + ], + "filament_scarf_seam_type": [ + "none" + ], + "nozzle_temperature": [ + "243" + ], + "nozzle_temperature_initial_layer": [ + "243" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "temperature_vitrification": [ + "53" + ], + "compatible_printers": [] +} diff --git a/.config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4 nozzle - Copy.info b/.config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4 nozzle - Copy.info new file mode 100644 index 0000000..fdc1c97 --- /dev/null +++ b/.config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4 nozzle - Copy.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GM001 +updated_time = 1746369905 diff --git a/.config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4 nozzle - Copy.json b/.config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4 nozzle - Copy.json new file mode 100644 index 0000000..a33b8d0 --- /dev/null +++ b/.config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4 nozzle - Copy.json @@ -0,0 +1,13 @@ +{ + "from": "User", + "inherits": "Creality Ender-3 V3 0.4 nozzle", + "is_custom_defined": "0", + "machine_end_gcode": "END_PRINT\nBEEP", + "manual_filament_change": "0", + "name": "Creality Ender-3 V3 0.4 nozzle - Copy", + "print_host": "192.168.1.109:4408", + "printer_settings_id": "Creality Ender-3 V3 0.4 nozzle - Copy", + "purge_in_prime_tower": "0", + "single_extruder_multi_material": "0", + "version": "2.3.0.3" +} diff --git a/.config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4.info b/.config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4.info new file mode 100644 index 0000000..fdc1c97 --- /dev/null +++ b/.config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GM001 +updated_time = 1746369905 diff --git a/.config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4.json b/.config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4.json new file mode 100644 index 0000000..3a7dd84 --- /dev/null +++ b/.config/OrcaSlicer/user/default/machine/Creality Ender-3 V3 0.4.json @@ -0,0 +1,13 @@ +{ + "from": "User", + "inherits": "Creality Ender-3 V3 0.4 nozzle", + "is_custom_defined": "0", + "machine_end_gcode": "END_PRINT\nBEEP", + "manual_filament_change": "0", + "name": "Creality Ender-3 V3 0.4", + "print_host": "10.0.32.100:4408", + "printer_settings_id": "Creality Ender-3 V3 0.4", + "purge_in_prime_tower": "0", + "single_extruder_multi_material": "0", + "version": "2.3.0.3" +} diff --git a/.config/OrcaSlicer/user/default/process/0.16mm Optimal @Creality Ender-3 V3 - Copy.info b/.config/OrcaSlicer/user/default/process/0.16mm Optimal @Creality Ender-3 V3 - Copy.info new file mode 100644 index 0000000..6226734 --- /dev/null +++ b/.config/OrcaSlicer/user/default/process/0.16mm Optimal @Creality Ender-3 V3 - Copy.info @@ -0,0 +1,5 @@ +sync_info = +user_id = +setting_id = +base_id = GP004 +updated_time = 1746823954 diff --git a/.config/OrcaSlicer/user/default/process/0.16mm Optimal @Creality Ender-3 V3 - Copy.json b/.config/OrcaSlicer/user/default/process/0.16mm Optimal @Creality Ender-3 V3 - Copy.json new file mode 100644 index 0000000..8abef5c --- /dev/null +++ b/.config/OrcaSlicer/user/default/process/0.16mm Optimal @Creality Ender-3 V3 - Copy.json @@ -0,0 +1,10 @@ +{ + "from": "User", + "inherits": "0.16mm Optimal @Creality Ender-3 V3", + "internal_solid_infill_pattern": "hilbertcurve", + "is_custom_defined": "0", + "name": "0.16mm Optimal @Creality Ender-3 V3 - Copy", + "print_settings_id": "0.16mm Optimal @Creality Ender-3 V3 - Copy", + "sparse_infill_pattern": "gyroid", + "version": "2.3.0.3" +} diff --git a/.config/OrcaSlicer/user/hints.cereal b/.config/OrcaSlicer/user/hints.cereal new file mode 100644 index 0000000000000000000000000000000000000000..32354e902f066d3296273d77500be8ea6e7d086f GIT binary patch literal 12 KcmZQ%KmY&$7ytqQ literal 0 HcmV?d00001